Commit 49f91b9e authored by Maurus Cuelenaere's avatar Maurus Cuelenaere Committed by Ben Dooks

ARM: S3C64XX: Move SmartQ LCD control platform definition to shared file

This shares the common LCD control platform definition used in the SmartQ 5 and
7. This also corrects it as a GPIO bitbanged SPI device instead of an I²C one,
which was wrong.
Signed-off-by: default avatarMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent ce611d7b
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/pwm_backlight.h> #include <linux/pwm_backlight.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/spi/spi_gpio.h>
#include <linux/usb/gpio_vbus.h> #include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
...@@ -184,6 +185,33 @@ static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = { ...@@ -184,6 +185,33 @@ static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
}, },
}; };
static int __init smartq_lcd_setup_gpio(void)
{
int ret;
ret = gpio_request(S3C64XX_GPM(3), "LCD power");
if (ret < 0)
return ret;
/* turn power off */
gpio_direction_output(S3C64XX_GPM(3), 0);
return 0;
}
/* GPM0 -> CS */
static struct spi_gpio_platform_data smartq_lcd_control = {
.sck = S3C64XX_GPM(1),
.mosi = S3C64XX_GPM(2),
.miso = S3C64XX_GPM(2),
};
static struct platform_device smartq_lcd_control_device = {
.name = "spi-gpio",
.id = 1,
.dev.platform_data = &smartq_lcd_control,
};
static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
{ {
gpio_direction_output(S3C64XX_GPM(3), power); gpio_direction_output(S3C64XX_GPM(3), power);
...@@ -199,7 +227,6 @@ static struct platform_device smartq_lcd_power_device = { ...@@ -199,7 +227,6 @@ static struct platform_device smartq_lcd_power_device = {
.dev.platform_data = &smartq_lcd_power_data, .dev.platform_data = &smartq_lcd_power_data,
}; };
static struct platform_device *smartq_devices[] __initdata = { static struct platform_device *smartq_devices[] __initdata = {
&s3c_device_hsmmc1, /* Init iNAND first, ... */ &s3c_device_hsmmc1, /* Init iNAND first, ... */
&s3c_device_hsmmc0, /* ... then the external SD card */ &s3c_device_hsmmc0, /* ... then the external SD card */
...@@ -214,6 +241,7 @@ static struct platform_device *smartq_devices[] __initdata = { ...@@ -214,6 +241,7 @@ static struct platform_device *smartq_devices[] __initdata = {
&s3c_device_ts, &s3c_device_ts,
&s3c_device_usb_hsotg, &s3c_device_usb_hsotg,
&smartq_backlight_device, &smartq_backlight_device,
&smartq_lcd_control_device,
&smartq_lcd_power_device, &smartq_lcd_power_device,
&smartq_usb_otg_vbus_dev, &smartq_usb_otg_vbus_dev,
}; };
...@@ -252,7 +280,6 @@ static int __init smartq_power_off_init(void) ...@@ -252,7 +280,6 @@ static int __init smartq_power_off_init(void)
/* leave power on */ /* leave power on */
gpio_direction_output(S3C64XX_GPK(15), 0); gpio_direction_output(S3C64XX_GPK(15), 0);
pm_power_off = smartq_power_off; pm_power_off = smartq_power_off;
return ret; return ret;
...@@ -354,6 +381,7 @@ void __init smartq_machine_init(void) ...@@ -354,6 +381,7 @@ void __init smartq_machine_init(void)
s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata); s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata); s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
WARN_ON(smartq_lcd_setup_gpio());
WARN_ON(smartq_power_off_init()); WARN_ON(smartq_power_off_init());
WARN_ON(smartq_usb_host_init()); WARN_ON(smartq_usb_host_init());
WARN_ON(smartq_usb_otg_init()); WARN_ON(smartq_usb_otg_init());
......
...@@ -12,7 +12,6 @@ ...@@ -12,7 +12,6 @@
#include <linux/fb.h> #include <linux/fb.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/gpio_keys.h> #include <linux/gpio_keys.h>
#include <linux/i2c-gpio.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/input.h> #include <linux/input.h>
#include <linux/leds.h> #include <linux/leds.h>
...@@ -33,31 +32,6 @@ ...@@ -33,31 +32,6 @@
#include "mach-smartq.h" #include "mach-smartq.h"
static void __init smartq5_lcd_setup_gpio(void)
{
gpio_request(S3C64XX_GPM(0), "LCD SCEN pin");
gpio_request(S3C64XX_GPM(1), "LCD SCL pin");
gpio_request(S3C64XX_GPM(2), "LCD SDA pin");
gpio_request(S3C64XX_GPM(3), "LCD power");
/* turn power off */
gpio_direction_output(S3C64XX_GPM(0), 1);
gpio_direction_input(S3C64XX_GPM(1));
gpio_direction_input(S3C64XX_GPM(2));
gpio_direction_output(S3C64XX_GPM(3), 0);
}
static struct i2c_gpio_platform_data smartq5_lcd_control = {
.sda_pin = S3C64XX_GPM(2),
.scl_pin = S3C64XX_GPM(1),
};
static struct platform_device smartq5_lcd_control_device = {
.name = "i2c-gpio",
.id = 1,
.dev.platform_data = &smartq5_lcd_control,
};
static struct gpio_led smartq5_leds[] __initdata = { static struct gpio_led smartq5_leds[] __initdata = {
{ {
.name = "smartq5:green", .name = "smartq5:green",
...@@ -160,7 +134,6 @@ static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = { ...@@ -160,7 +134,6 @@ static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
static struct platform_device *smartq5_devices[] __initdata = { static struct platform_device *smartq5_devices[] __initdata = {
&smartq5_leds_device, &smartq5_leds_device,
&smartq5_buttons_device, &smartq5_buttons_device,
&smartq5_lcd_control_device,
}; };
static void __init smartq5_machine_init(void) static void __init smartq5_machine_init(void)
...@@ -168,7 +141,6 @@ static void __init smartq5_machine_init(void) ...@@ -168,7 +141,6 @@ static void __init smartq5_machine_init(void)
s3c_fb_set_platdata(&smartq5_lcd_pdata); s3c_fb_set_platdata(&smartq5_lcd_pdata);
smartq_machine_init(); smartq_machine_init();
smartq5_lcd_setup_gpio();
platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices)); platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
} }
......
...@@ -12,7 +12,6 @@ ...@@ -12,7 +12,6 @@
#include <linux/fb.h> #include <linux/fb.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/gpio_keys.h> #include <linux/gpio_keys.h>
#include <linux/i2c-gpio.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/input.h> #include <linux/input.h>
#include <linux/leds.h> #include <linux/leds.h>
...@@ -33,31 +32,6 @@ ...@@ -33,31 +32,6 @@
#include "mach-smartq.h" #include "mach-smartq.h"
static void __init smartq7_lcd_setup_gpio(void)
{
gpio_request(S3C64XX_GPM(0), "LCD CSB pin");
gpio_request(S3C64XX_GPM(3), "LCD power");
gpio_request(S3C64XX_GPM(4), "LCD power status");
/* turn power off */
gpio_direction_output(S3C64XX_GPM(0), 1);
gpio_direction_output(S3C64XX_GPM(3), 0);
gpio_direction_input(S3C64XX_GPM(4));
}
static struct i2c_gpio_platform_data smartq7_lcd_control = {
.sda_pin = S3C64XX_GPM(2),
.scl_pin = S3C64XX_GPM(1),
.sda_is_open_drain = 1,
.scl_is_open_drain = 1,
};
static struct platform_device smartq7_lcd_control_device = {
.name = "i2c-gpio",
.id = 1,
.dev.platform_data = &smartq7_lcd_control,
};
static struct gpio_led smartq7_leds[] __initdata = { static struct gpio_led smartq7_leds[] __initdata = {
{ {
.name = "smartq7:red", .name = "smartq7:red",
...@@ -176,7 +150,6 @@ static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = { ...@@ -176,7 +150,6 @@ static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = {
static struct platform_device *smartq7_devices[] __initdata = { static struct platform_device *smartq7_devices[] __initdata = {
&smartq7_leds_device, &smartq7_leds_device,
&smartq7_buttons_device, &smartq7_buttons_device,
&smartq7_lcd_control_device,
}; };
static void __init smartq7_machine_init(void) static void __init smartq7_machine_init(void)
...@@ -184,7 +157,6 @@ static void __init smartq7_machine_init(void) ...@@ -184,7 +157,6 @@ static void __init smartq7_machine_init(void)
s3c_fb_set_platdata(&smartq7_lcd_pdata); s3c_fb_set_platdata(&smartq7_lcd_pdata);
smartq_machine_init(); smartq_machine_init();
smartq7_lcd_setup_gpio();
platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices)); platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment