Commit 4a5b85ff authored by Vivien Didelot's avatar Vivien Didelot Committed by David S. Miller

net: dsa: use dsa_is_user_port everywhere

Most of the DSA code still check ds->enabled_port_mask directly to
inspect a given port type instead of using the provided dsa_is_user_port
helper. Change this.
Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 2b3e9891
......@@ -652,8 +652,7 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds)
* bcm_sf2_sw_setup
*/
for (port = 0; port < DSA_MAX_PORTS; port++) {
if ((1 << port) & ds->enabled_port_mask ||
dsa_is_cpu_port(ds, port))
if (dsa_is_user_port(ds, port) || dsa_is_cpu_port(ds, port))
bcm_sf2_port_disable(ds, port, NULL);
}
......@@ -676,7 +675,7 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds)
bcm_sf2_gphy_enable_set(ds, true);
for (port = 0; port < DSA_MAX_PORTS; port++) {
if ((1 << port) & ds->enabled_port_mask)
if (dsa_is_user_port(ds, port))
bcm_sf2_port_setup(ds, port, NULL);
else if (dsa_is_cpu_port(ds, port))
bcm_sf2_imp_setup(ds, port);
......@@ -771,7 +770,7 @@ static void bcm_sf2_sw_configure_vlan(struct dsa_switch *ds)
bcm_sf2_vlan_op(priv, ARLA_VTBL_CMD_CLEAR);
for (port = 0; port < priv->hw_params.num_ports; port++) {
if (!((1 << port) & ds->enabled_port_mask))
if (!dsa_is_user_port(ds, port))
continue;
core_writel(priv, 1, CORE_DEFAULT_1Q_TAG_P(port));
......@@ -786,7 +785,7 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
/* Enable all valid ports and disable those unused */
for (port = 0; port < priv->hw_params.num_ports; port++) {
/* IMP port receives special treatment */
if ((1 << port) & ds->enabled_port_mask)
if (dsa_is_user_port(ds, port))
bcm_sf2_port_setup(ds, port, NULL);
else if (dsa_is_cpu_port(ds, port))
bcm_sf2_imp_setup(ds, port);
......
......@@ -750,7 +750,7 @@ static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port,
port_num = fs->ring_cookie / SF2_NUM_EGRESS_QUEUES;
if (fs->ring_cookie == RX_CLS_FLOW_DISC ||
!(BIT(port_num) & ds->enabled_port_mask) ||
!dsa_is_user_port(ds, port_num) ||
port_num >= priv->hw_params.num_ports)
return -EINVAL;
/*
......
......@@ -781,7 +781,7 @@ mt7530_port_bridge_join(struct dsa_switch *ds, int port,
* same bridge. If the port is disabled, port matrix is kept
* and not being setup until the port becomes enabled.
*/
if (ds->enabled_port_mask & BIT(i) && i != port) {
if (dsa_is_user_port(ds, i) && i != port) {
if (dsa_to_port(ds, i)->bridge_dev != bridge)
continue;
if (priv->ports[i].enable)
......@@ -818,7 +818,7 @@ mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
* in the same bridge. If the port is disabled, port matrix
* is kept and not being setup until the port becomes enabled.
*/
if (ds->enabled_port_mask & BIT(i) && i != port) {
if (dsa_is_user_port(ds, i) && i != port) {
if (dsa_to_port(ds, i)->bridge_dev != bridge)
continue;
if (priv->ports[i].enable)
......
......@@ -536,7 +536,7 @@ qca8k_setup(struct dsa_switch *ds)
/* Disable MAC by default on all user ports */
for (i = 1; i < QCA8K_NUM_PORTS; i++)
if (ds->enabled_port_mask & BIT(i))
if (dsa_is_user_port(ds, i))
qca8k_port_set_status(priv, i, 0);
/* Forward all unknown frames to CPU port for Linux processing */
......@@ -556,7 +556,7 @@ qca8k_setup(struct dsa_switch *ds)
}
/* Invividual user ports get connected to CPU port only */
if (ds->enabled_port_mask & BIT(i)) {
if (dsa_is_user_port(ds, i)) {
int shift = 16 * (i % 2);
qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
......
......@@ -201,7 +201,7 @@ static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev,
#ifdef CONFIG_PM_SLEEP
static bool dsa_is_port_initialized(struct dsa_switch *ds, int p)
{
return ds->enabled_port_mask & (1 << p) && ds->ports[p].slave;
return dsa_is_user_port(ds, p) && ds->ports[p].slave;
}
int dsa_switch_suspend(struct dsa_switch *ds)
......
......@@ -190,7 +190,7 @@ static int dsa_switch_setup_one(struct dsa_switch *ds,
ds->ports[i].dn = cd->port_dn[i];
ds->ports[i].cpu_dp = dst->cpu_dp;
if (!(ds->enabled_port_mask & (1 << i)))
if (dsa_is_user_port(ds, i))
continue;
ret = dsa_slave_create(&ds->ports[i], cd->port_names[i]);
......@@ -258,7 +258,7 @@ static void dsa_switch_destroy(struct dsa_switch *ds)
/* Destroy network devices for physical switch ports. */
for (port = 0; port < ds->num_ports; port++) {
if (!(ds->enabled_port_mask & (1 << port)))
if (!dsa_is_user_port(ds, port))
continue;
if (!ds->ports[port].slave)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment