wfx: get out from the staging area

The wfx driver is now mature enough to leave the staging area.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>

Documentation/devicetree/bindings/staging/net/wireless/silabs,wfx.yaml → Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml

@@ -3,7 +3,7 @@
 %YAML 1.2
 ---
 
-$id: http://devicetree.org/schemas/staging/net/wireless/silabs,wfx.yaml#
+$id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Silicon Labs WFxxx devicetree bindings

MAINTAINERS

@@ -17982,8 +17982,8 @@ F:	drivers/platform/x86/touchscreen_dmi.c
 SILICON LABS WIRELESS DRIVERS (for WFxxx series)
 M:	Jérôme Pouiller <jerome.pouiller@silabs.com>
 S:	Supported
-F:	Documentation/devicetree/bindings/staging/net/wireless/silabs,wfx.yaml
-F:	drivers/staging/wfx/
+F:	Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
+F:	drivers/net/wireless/silabs/wfx/
 
 SILICON MOTION SM712 FRAME BUFFER DRIVER
 M:	Sudip Mukherjee <sudipm.mukherjee@gmail.com>

drivers/net/wireless/Kconfig

@@ -31,6 +31,7 @@ source "drivers/net/wireless/microchip/Kconfig"
 source "drivers/net/wireless/ralink/Kconfig"
 source "drivers/net/wireless/realtek/Kconfig"
 source "drivers/net/wireless/rsi/Kconfig"
+source "drivers/net/wireless/silabs/Kconfig"
 source "drivers/net/wireless/st/Kconfig"
 source "drivers/net/wireless/ti/Kconfig"
 source "drivers/net/wireless/zydas/Kconfig"

drivers/net/wireless/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_WLAN_VENDOR_MICROCHIP) += microchip/
 obj-$(CONFIG_WLAN_VENDOR_RALINK) += ralink/
 obj-$(CONFIG_WLAN_VENDOR_REALTEK) += realtek/
 obj-$(CONFIG_WLAN_VENDOR_RSI) += rsi/
+obj-$(CONFIG_WLAN_VENDOR_SILABS) += silabs/
 obj-$(CONFIG_WLAN_VENDOR_ST) += st/
 obj-$(CONFIG_WLAN_VENDOR_TI) += ti/
 obj-$(CONFIG_WLAN_VENDOR_ZYDAS) += zydas/

drivers/net/wireless/silabs/Kconfig

+# SPDX-License-Identifier: GPL-2.0
+
+config WLAN_VENDOR_SILABS
+	bool "Silicon Laboratories devices"
+	default y
+	help
+	  If you have a wireless card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all the
+	  questions about these cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if WLAN_VENDOR_SILABS
+
+source "drivers/net/wireless/silabs/wfx/Kconfig"
+
+endif # WLAN_VENDOR_SILABS

drivers/net/wireless/silabs/Makefile

+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_WFX)      += wfx/

drivers/staging/Kconfig

@@ -86,6 +86,5 @@ source "drivers/staging/fieldbus/Kconfig"
 
 source "drivers/staging/qlge/Kconfig"
 
-source "drivers/staging/wfx/Kconfig"
 
 endif # STAGING

drivers/staging/Makefile

@@ -33,4 +33,3 @@ obj-$(CONFIG_PI433)		+= pi433/
 obj-$(CONFIG_XIL_AXIS_FIFO)	+= axis-fifo/
 obj-$(CONFIG_FIELDBUS_DEV)     += fieldbus/
 obj-$(CONFIG_QLGE)		+= qlge/
-obj-$(CONFIG_WFX)		+= wfx/

drivers/staging/wfx/TODO

-This is a list of things that need to be done to get this driver out of the
-staging directory.
-
-  - As suggested by Felix, rate control could be improved following this idea:
-        https://lore.kernel.org/lkml/3099559.gv3Q75KnN1@pc-42/
-