Merge tag 'tegra-for-3.18-fixes-for-rc5' of...

Merge tag 'tegra-for-3.18-fixes-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into fixes

Pull "ARM: tegra: Device tree fixes for v3.18-rc5" from Thierry Reding:

This contains the serial port numbering fixes that are required for the
serial port numbering to stay the same with or without the serial core
making use of the aliases defined in DT.

eMMC is also fixed for TN7 and Roth boards which were using the wrong
regulators.

* tag 'tegra-for-3.18-fixes-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: roth: Fix SD card VDD_IO regulator
  ARM: tegra: Remove eMMC vmmc property for roth/tn7
  ARM: dts: tegra: move serial aliases to per-board
  ARM: tegra: Add serial port labels to Tegra124 DT
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/tegra114-dalmore.dts

@@ -15,6 +15,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps65913@58";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra114-roth.dts

@@ -15,6 +15,10 @@ chosen {
 		linux,initrd-end = <0x82800000>;
 	};
 
+	aliases {
+		serial0 = &uartd;
+	};
+
 	firmware {
 		trusted-foundations {
 			compatible = "tlm,trusted-foundations";
@@ -916,8 +920,6 @@ vddio_sdmmc3: ldo9 {
 						regulator-name = "vddio-sdmmc3";
 						regulator-min-microvolt = <1800000>;
 						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
 					};
 
 					ldousb {
@@ -962,7 +964,7 @@ pmc@7000e400 {
 	sdhci@78000400 {
 		status = "okay";
 		bus-width = <4>;
-		vmmc-supply = <&vddio_sdmmc3>;
+		vqmmc-supply = <&vddio_sdmmc3>;
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
 	};
@@ -971,7 +973,6 @@ sdhci@78000400 {
 	sdhci@78000600 {
 		status = "okay";
 		bus-width = <8>;
-		vmmc-supply = <&vdd_1v8>;
 		non-removable;
 	};
 

arch/arm/boot/dts/tegra114-tn7.dts

@@ -15,6 +15,10 @@ chosen {
 		linux,initrd-end = <0x82800000>;
 	};
 
+	aliases {
+		serial0 = &uartd;
+	};
+
 	firmware {
 		trusted-foundations {
 			compatible = "tlm,trusted-foundations";
@@ -240,7 +244,6 @@ pmc@7000e400 {
 	sdhci@78000600 {
 		status = "okay";
 		bus-width = <8>;
-		vmmc-supply = <&vdd_1v8>;
 		non-removable;
 	};
 

arch/arm/boot/dts/tegra114.dtsi

@@ -9,13 +9,6 @@ / {
 	compatible = "nvidia,tegra114";
 	interrupt-parent = <&gic>;
 
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-	};
-
 	host1x@50000000 {
 		compatible = "nvidia,tegra114-host1x", "simple-bus";
 		reg = <0x50000000 0x00028000>;

arch/arm/boot/dts/tegra124-jetson-tk1.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@0,7000d000/pmic@40";
 		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra124-nyan-big.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@0,7000d000/pmic@40";
 		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra124-venice2.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@0,7000d000/pmic@40";
 		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra124.dtsi

@@ -286,7 +286,7 @@ pinmux: pinmux@0,70000868 {
 	 * the APB DMA based serial driver, the comptible is
 	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
 	 */
-	serial@0,70006000 {
+	uarta: serial@0,70006000 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006000 0x0 0x40>;
 		reg-shift = <2>;
@@ -299,7 +299,7 @@ serial@0,70006000 {
 		status = "disabled";
 	};
 
-	serial@0,70006040 {
+	uartb: serial@0,70006040 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006040 0x0 0x40>;
 		reg-shift = <2>;
@@ -312,7 +312,7 @@ serial@0,70006040 {
 		status = "disabled";
 	};
 
-	serial@0,70006200 {
+	uartc: serial@0,70006200 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006200 0x0 0x40>;
 		reg-shift = <2>;
@@ -325,7 +325,7 @@ serial@0,70006200 {
 		status = "disabled";
 	};
 
-	serial@0,70006300 {
+	uartd: serial@0,70006300 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006300 0x0 0x40>;
 		reg-shift = <2>;

arch/arm/boot/dts/tegra20-harmony.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-iris-512.dts

@@ -6,6 +6,11 @@ / {
 	model = "Toradex Colibri T20 512MB on Iris";
 	compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
 
+	aliases {
+		serial0 = &uarta;
+		serial1 = &uartd;
+	};
+
 	host1x@50000000 {
 		hdmi@54280000 {
 			status = "okay";

arch/arm/boot/dts/tegra20-medcom-wide.dts

@@ -6,6 +6,10 @@ / {
 	model = "Avionic Design Medcom-Wide board";
 	compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
 
+	aliases {
+		serial0 = &uartd;
+	};
+
 	pwm@7000a000 {
 		status = "okay";
 	};

arch/arm/boot/dts/tegra20-paz00.dts

@@ -10,6 +10,8 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-seaboard.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-tamonten.dtsi

@@ -7,6 +7,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-trimslice.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000c500/rtc@56";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-ventana.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-whistler.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/max8907@3c";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20.dtsi

@@ -9,14 +9,6 @@ / {
 	compatible = "nvidia,tegra20";
 	interrupt-parent = <&intc>;
 
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-		serial4 = &uarte;
-	};
-
 	host1x@50000000 {
 		compatible = "nvidia,tegra20-host1x", "simple-bus";
 		reg = <0x50000000 0x00024000>;

arch/arm/boot/dts/tegra30-apalis-eval.dts

@@ -11,6 +11,10 @@ aliases {
 		rtc0 = "/i2c@7000c000/rtc@68";
 		rtc1 = "/i2c@7000d000/tps65911@2d";
 		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
 	};
 
 	pcie-controller@00003000 {

arch/arm/boot/dts/tegra30-beaver.dts

@@ -9,6 +9,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps65911@2d";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra30-cardhu.dtsi

@@ -30,6 +30,8 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps65911@2d";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
 	};
 
 	memory {

arch/arm/boot/dts/tegra30-colibri-eval-v3.dts

@@ -10,6 +10,9 @@ aliases {
 		rtc0 = "/i2c@7000c000/rtc@68";
 		rtc1 = "/i2c@7000d000/tps65911@2d";
 		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartd;
 	};
 
 	host1x@50000000 {

arch/arm/boot/dts/tegra30.dtsi

@@ -9,14 +9,6 @@ / {
 	compatible = "nvidia,tegra30";
 	interrupt-parent = <&intc>;
 
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-		serial4 = &uarte;
-	};
-
 	pcie-controller@00003000 {
 		compatible = "nvidia,tegra30-pcie";
 		device_type = "pci";