Commit 4ab37240 authored by Florian Schilhabel's avatar Florian Schilhabel Committed by Greg Kroah-Hartman

staging: rtl8192su: remove re-declaration of counter i

variable i is declared integer in rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail.
a few lines down it is re-declared u8.
removed the re-declaration.
plus cosmetics
Signed-off-by: default avatarFlorian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent e3133b28
......@@ -3427,34 +3427,28 @@ void update_hal_variables(struct r8192_priv *priv)
}
}
//
// Description:
// Config HW adapter information into initial value.
//
// Assumption:
// 1. After Auto load fail(i.e, check CR9346 fail)
//
// Created by Roger, 2008.10.21.
//
void
rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(struct net_device* dev)
/*
* Description:
* Config HW adapter information into initial value.
*
* Assumption:
* 1. After Auto load fail(i.e, check CR9346 fail)
*
*/
void rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
//u16 i,usValue;
//u8 sMacAddr[6] = {0x00, 0xE0, 0x4C, 0x81, 0x92, 0x00};
u8 rf_path; // For EEPROM/EFUSE After V0.6_1117
int i;
struct r8192_priv *priv = ieee80211_priv(dev);
u8 rf_path; /* For EEPROM/EFUSE After V0.6_1117 */
int i;
RT_TRACE(COMP_INIT, "====> ConfigAdapterInfo8192SForAutoLoadFail\n");
write_nic_byte(dev, SYS_ISO_CTRL+1, 0xE8); // Isolation signals from Loader
//PlatformStallExecution(10000);
/* Isolation signals from Loader */
write_nic_byte(dev, SYS_ISO_CTRL+1, 0xE8);
mdelay(10);
write_nic_byte(dev, PMC_FSM, 0x02); // Enable Loader Data Keep
//RT_ASSERT(priv->AutoloadFailFlag==TRUE, ("ReadAdapterInfo8192SEEPROM(): AutoloadFailFlag !=TRUE\n"));
write_nic_byte(dev, PMC_FSM, 0x02); /* Enable Loader Data Keep */
// Initialize IC Version && Channel Plan
/* Initialize IC Version && Channel Plan */
priv->eeprom_vid = 0;
priv->eeprom_pid = 0;
priv->card_8192_version = 0;
......@@ -3465,12 +3459,14 @@ rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(struct net_device* dev)
RT_TRACE(COMP_INIT, "EEPROM VID = 0x%4x\n", priv->eeprom_vid);
RT_TRACE(COMP_INIT, "EEPROM PID = 0x%4x\n", priv->eeprom_pid);
RT_TRACE(COMP_INIT, "EEPROM Customer ID: 0x%2x\n", priv->eeprom_CustomerID);
RT_TRACE(COMP_INIT, "EEPROM SubCustomer ID: 0x%2x\n", priv->eeprom_SubCustomerID);
RT_TRACE(COMP_INIT, "EEPROM ChannelPlan = 0x%4x\n", priv->eeprom_ChannelPlan);
RT_TRACE(COMP_INIT, "IgnoreDiffRateTxPowerOffset = %d\n", priv->bIgnoreDiffRateTxPowerOffset);
RT_TRACE(COMP_INIT, "EEPROM Customer ID: 0x%2x\n",
priv->eeprom_CustomerID);
RT_TRACE(COMP_INIT, "EEPROM SubCustomer ID: 0x%2x\n",
priv->eeprom_SubCustomerID);
RT_TRACE(COMP_INIT, "EEPROM ChannelPlan = 0x%4x\n",
priv->eeprom_ChannelPlan);
RT_TRACE(COMP_INIT, "IgnoreDiffRateTxPowerOffset = %d\n",
priv->bIgnoreDiffRateTxPowerOffset);
priv->EEPROMUsbOption = EEPROM_USB_Default_OPTIONAL_FUNC;
RT_TRACE(COMP_INIT, "USB Option = %#x\n", priv->EEPROMUsbOption);
......@@ -3478,19 +3474,15 @@ rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(struct net_device* dev)
for(i=0; i<5; i++)
priv->EEPROMUsbPhyParam[i] = EEPROM_USB_Default_PHY_PARAM;
//RT_PRINT_DATA(COMP_INIT|COMP_EFUSE, DBG_LOUD, ("EFUSE USB PHY Param: \n"), priv->EEPROMUsbPhyParam, 5);
{
//<Roger_Notes> In this case, we random assigh MAC address here. 2008.10.15.
/*
* In this case, we randomly assign a MAC address here.
*/
static u8 sMacAddr[6] = {0x00, 0xE0, 0x4C, 0x81, 0x92, 0x00};
u8 i;
//sMacAddr[5] = (u8)GetRandomNumber(1, 254);
for(i = 0; i < 6; i++)
dev->dev_addr[i] = sMacAddr[i];
}
//NicIFSetMacAddress(Adapter, Adapter->PermanentAddress);
/* NicIFSetMacAddress(Adapter, Adapter->PermanentAddress); */
write_nic_dword(dev, IDR0, ((u32*)dev->dev_addr)[0]);
write_nic_word(dev, IDR4, ((u16*)(dev->dev_addr + 4))[0]);
......@@ -3499,7 +3491,7 @@ rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(struct net_device* dev)
dev->dev_addr);
priv->EEPROMBoardType = EEPROM_Default_BoardType;
priv->rf_type = RF_1T2R; //RF_2T2R
priv->rf_type = RF_1T2R; /* RF_2T2R */
priv->EEPROMTxPowerDiff = EEPROM_Default_PwDiff;
priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
......@@ -3508,13 +3500,11 @@ rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(struct net_device* dev)
priv->EEPROMTSSI_B = EEPROM_Default_TSSI;
priv->EEPROMTxPwrTkMode = EEPROM_Default_TxPwrTkMode;
for (rf_path = 0; rf_path < 2; rf_path++)
{
for (i = 0; i < 3; i++)
{
// Read CCK RF A & B Tx power
/* Read CCK RF A & B Tx power */
priv->RfCckChnlAreaTxPwr[rf_path][i] =
priv->RfOfdmChnlAreaTxPwr1T[rf_path][i] =
priv->RfOfdmChnlAreaTxPwr2T[rf_path][i] =
......@@ -3524,22 +3514,25 @@ rtl8192SU_ConfigAdapterInfo8192SForAutoLoadFail(struct net_device* dev)
update_hal_variables(priv);
//
// Update remained HAL variables.
//
/*
* Update remaining HAL variables.
*/
priv->TSSI_13dBm = priv->EEPROMThermalMeter *100;
priv->LegacyHTTxPowerDiff = priv->EEPROMTxPowerDiff;//new
priv->LegacyHTTxPowerDiff = priv->EEPROMTxPowerDiff; /* new */
priv->TxPowerDiff = priv->EEPROMTxPowerDiff;
//priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);// Antenna B gain offset to antenna A, bit0~3
//priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4);// Antenna C gain offset to antenna A, bit4~7
priv->CrystalCap = priv->EEPROMCrystalCap; // CrystalCap, bit12~15
priv->ThermalMeter[0] = priv->EEPROMThermalMeter;// ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
/* Antenna B gain offset to antenna A, bit0~3 */
/* priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf); */
/* Antenna C gain offset to antenna A, bit4~7 */
/* priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4); */
/* CrystalCap, bit12~15 */
priv->CrystalCap = priv->EEPROMCrystalCap;
/* ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2 */
priv->ThermalMeter[0] = priv->EEPROMThermalMeter;
priv->LedStrategy = SW_LED_MODE0;
init_rate_adaptive(dev);
RT_TRACE(COMP_INIT, "<==== ConfigAdapterInfo8192SForAutoLoadFail\n");
}
//
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment