Commit 4ab85930 authored by Marek Vasut's avatar Marek Vasut Committed by Robert Foss

drm: bridge: icn6211: Add DSI lane count DT property parsing

The driver currently hard-codes DSI lane count to two, however the chip
is capable of operating in 1..4 DSI lanes mode. Parse 'data-lanes' DT
property and program the result into DSI_CTRL register.
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: default avatarRobert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407185617.179573-2-marex@denx.de
parent 29d699a4
...@@ -395,6 +395,11 @@ static void chipone_atomic_enable(struct drm_bridge *bridge, ...@@ -395,6 +395,11 @@ static void chipone_atomic_enable(struct drm_bridge *bridge,
/* dsi specific sequence */ /* dsi specific sequence */
chipone_writeb(icn, SYNC_EVENT_DLY, 0x80); chipone_writeb(icn, SYNC_EVENT_DLY, 0x80);
chipone_writeb(icn, HFP_MIN, hfp & 0xff); chipone_writeb(icn, HFP_MIN, hfp & 0xff);
/* DSI data lane count */
chipone_writeb(icn, DSI_CTRL,
DSI_CTRL_UNKNOWN | DSI_CTRL_DSI_LANES(icn->dsi->lanes - 1));
chipone_writeb(icn, MIPI_PD_CK_LANE, 0xa0); chipone_writeb(icn, MIPI_PD_CK_LANE, 0xa0);
chipone_writeb(icn, PLL_CTRL(12), 0xff); chipone_writeb(icn, PLL_CTRL(12), 0xff);
chipone_writeb(icn, MIPI_PN_SWAP, 0x00); chipone_writeb(icn, MIPI_PN_SWAP, 0x00);
...@@ -480,9 +485,23 @@ static void chipone_mode_set(struct drm_bridge *bridge, ...@@ -480,9 +485,23 @@ static void chipone_mode_set(struct drm_bridge *bridge,
static int chipone_dsi_attach(struct chipone *icn) static int chipone_dsi_attach(struct chipone *icn)
{ {
struct mipi_dsi_device *dsi = icn->dsi; struct mipi_dsi_device *dsi = icn->dsi;
int ret; struct device *dev = icn->dev;
struct device_node *endpoint;
int dsi_lanes, ret;
endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0);
dsi_lanes = of_property_count_u32_elems(endpoint, "data-lanes");
of_node_put(endpoint);
/*
* If the 'data-lanes' property does not exist in DT or is invalid,
* default to previously hard-coded behavior, which was 4 data lanes.
*/
if (dsi_lanes >= 1 && dsi_lanes <= 4)
icn->dsi->lanes = dsi_lanes;
else
icn->dsi->lanes = 4;
dsi->lanes = 4;
dsi->format = MIPI_DSI_FMT_RGB888; dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET; MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment