Commit 4ac8c8e5 authored by Frank Li's avatar Frank Li Committed by Jon Mason

Documentation: PCI: Add specification for the PCI vNTB function device

Add specification for the PCI vNTB function device. The endpoint function
driver and the host PCI driver should be created based on this
specification.
Signed-off-by: default avatarFrank Li <Frank.Li@nxp.com>
Signed-off-by: default avatarJon Mason <jdmason@kudzu.us>
parent e35f56bb
......@@ -13,6 +13,8 @@ PCI Endpoint Framework
pci-test-howto
pci-ntb-function
pci-ntb-howto
pci-vntb-function
pci-vntb-howto
function/binding/pci-test
function/binding/pci-ntb
.. SPDX-License-Identifier: GPL-2.0
=================
PCI vNTB Function
=================
:Author: Frank Li <Frank.Li@nxp.com>
The difference between PCI NTB function and PCI vNTB function is
PCI NTB function need at two endpoint instances and connect HOST1
and HOST2.
PCI vNTB function only use one host and one endpoint(EP), use NTB
connect EP and PCI host
.. code-block:: text
+------------+ +---------------------------------------+
| | | |
+------------+ | +--------------+
| NTB | | | NTB |
| NetDev | | | NetDev |
+------------+ | +--------------+
| NTB | | | NTB |
| Transfer | | | Transfer |
+------------+ | +--------------+
| | | | |
| PCI NTB | | | |
| EPF | | | |
| Driver | | | PCI Virtual |
| | +---------------+ | NTB Driver |
| | | PCI EP NTB |<------>| |
| | | FN Driver | | |
+------------+ +---------------+ +--------------+
| | | | | |
| PCI BUS | <-----> | PCI EP BUS | | Virtual PCI |
| | PCI | | | BUS |
+------------+ +---------------+--------+--------------+
PCI RC PCI EP
Constructs used for Implementing vNTB
=====================================
1) Config Region
2) Self Scratchpad Registers
3) Peer Scratchpad Registers
4) Doorbell (DB) Registers
5) Memory Window (MW)
Config Region:
--------------
It is same as PCI NTB Function driver
Scratchpad Registers:
---------------------
It is appended after Config region.
+--------------------------------------------------+ Base
| |
| |
| |
| Common Config Register |
| |
| |
| |
+-----------------------+--------------------------+ Base + span_offset
| | |
| Peer Span Space | Span Space |
| | |
| | |
+-----------------------+--------------------------+ Base + span_offset
| | | + span_count * 4
| | |
| Span Space | Peer Span Space |
| | |
+-----------------------+--------------------------+
Virtual PCI Pcie Endpoint
NTB Driver NTB Driver
Doorbell Registers:
-------------------
Doorbell Registers are used by the hosts to interrupt each other.
Memory Window:
--------------
Actual transfer of data between the two hosts will happen using the
memory window.
Modeling Constructs:
====================
32-bit BARs.
====== ===============
BAR NO CONSTRUCTS USED
====== ===============
BAR0 Config Region
BAR1 Doorbell
BAR2 Memory Window 1
BAR3 Memory Window 2
BAR4 Memory Window 3
BAR5 Memory Window 4
====== ===============
64-bit BARs.
====== ===============================
BAR NO CONSTRUCTS USED
====== ===============================
BAR0 Config Region + Scratchpad
BAR1
BAR2 Doorbell
BAR3
BAR4 Memory Window 1
BAR5
====== ===============================
.. SPDX-License-Identifier: GPL-2.0
===================================================================
PCI Non-Transparent Bridge (NTB) Endpoint Function (EPF) User Guide
===================================================================
:Author: Frank Li <Frank.Li@nxp.com>
This document is a guide to help users use pci-epf-vntb function driver
and ntb_hw_epf host driver for NTB functionality. The list of steps to
be followed in the host side and EP side is given below. For the hardware
configuration and internals of NTB using configurable endpoints see
Documentation/PCI/endpoint/pci-vntb-function.rst
Endpoint Device
===============
Endpoint Controller Devices
---------------------------
To find the list of endpoint controller devices in the system::
# ls /sys/class/pci_epc/
5f010000.pcie_ep
If PCI_ENDPOINT_CONFIGFS is enabled::
# ls /sys/kernel/config/pci_ep/controllers
5f010000.pcie_ep
Endpoint Function Drivers
-------------------------
To find the list of endpoint function drivers in the system::
# ls /sys/bus/pci-epf/drivers
pci_epf_ntb pci_epf_test pci_epf_vntb
If PCI_ENDPOINT_CONFIGFS is enabled::
# ls /sys/kernel/config/pci_ep/functions
pci_epf_ntb pci_epf_test pci_epf_vntb
Creating pci-epf-vntb Device
----------------------------
PCI endpoint function device can be created using the configfs. To create
pci-epf-vntb device, the following commands can be used::
# mount -t configfs none /sys/kernel/config
# cd /sys/kernel/config/pci_ep/
# mkdir functions/pci_epf_vntb/func1
The "mkdir func1" above creates the pci-epf-ntb function device that will
be probed by pci_epf_vntb driver.
The PCI endpoint framework populates the directory with the following
configurable fields::
# ls functions/pci_epf_ntb/func1
baseclass_code deviceid msi_interrupts pci-epf-ntb.0
progif_code secondary subsys_id vendorid
cache_line_size interrupt_pin msix_interrupts primary
revid subclass_code subsys_vendor_id
The PCI endpoint function driver populates these entries with default values
when the device is bound to the driver. The pci-epf-vntb driver populates
vendorid with 0xffff and interrupt_pin with 0x0001::
# cat functions/pci_epf_vntb/func1/vendorid
0xffff
# cat functions/pci_epf_vntb/func1/interrupt_pin
0x0001
Configuring pci-epf-vntb Device
-------------------------------
The user can configure the pci-epf-vntb device using its configfs entry. In order
to change the vendorid and the deviceid, the following
commands can be used::
# echo 0x1957 > functions/pci_epf_vntb/func1/vendorid
# echo 0x0809 > functions/pci_epf_vntb/func1/deviceid
In order to configure NTB specific attributes, a new sub-directory to func1
should be created::
# mkdir functions/pci_epf_vntb/func1/pci_epf_vntb.0/
The NTB function driver will populate this directory with various attributes
that can be configured by the user::
# ls functions/pci_epf_vntb/func1/pci_epf_vntb.0/
db_count mw1 mw2 mw3 mw4 num_mws
spad_count
A sample configuration for NTB function is given below::
# echo 4 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/db_count
# echo 128 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/spad_count
# echo 1 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/num_mws
# echo 0x100000 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/mw1
A sample configuration for virtual NTB driver for virutal PCI bus::
# echo 0x1957 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_vid
# echo 0x080A > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_pid
# echo 0x10 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vbus_number
Binding pci-epf-ntb Device to EP Controller
--------------------------------------------
NTB function device should be attached to PCI endpoint controllers
connected to the host.
# ln -s controllers/5f010000.pcie_ep functions/pci-epf-ntb/func1/primary
Once the above step is completed, the PCI endpoint controllers are ready to
establish a link with the host.
Start the Link
--------------
In order for the endpoint device to establish a link with the host, the _start_
field should be populated with '1'. For NTB, both the PCI endpoint controllers
should establish link with the host (imx8 don't need this steps)::
# echo 1 > controllers/5f010000.pcie_ep/start
RootComplex Device
==================
lspci Output at Host side
------------------------
Note that the devices listed here correspond to the values populated in
"Creating pci-epf-ntb Device" section above::
# lspci
00:00.0 PCI bridge: Freescale Semiconductor Inc Device 0000 (rev 01)
01:00.0 RAM memory: Freescale Semiconductor Inc Device 0809
Endpoint Device / Virtual PCI bus
=================================
lspci Output at EP Side / Virtual PCI bus
-----------------------------------------
Note that the devices listed here correspond to the values populated in
"Creating pci-epf-ntb Device" section above::
# lspci
10:00.0 Unassigned class [ffff]: Dawicontrol Computersysteme GmbH Device 1234 (rev ff)
Using ntb_hw_epf Device
-----------------------
The host side software follows the standard NTB software architecture in Linux.
All the existing client side NTB utilities like NTB Transport Client and NTB
Netdev, NTB Ping Pong Test Client and NTB Tool Test Client can be used with NTB
function device.
For more information on NTB see
:doc:`Non-Transparent Bridge <../../driver-api/ntb>`
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment