pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled()

With devm_clk_get_enabled() the call to clk_disable_unprepare() can be
dropped from the error path and the remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

drivers/pwm/pwm-lpc18xx-sct.c

@@ -367,30 +367,21 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(lpc18xx_pwm->base))
 		return PTR_ERR(lpc18xx_pwm->base);
 
-	lpc18xx_pwm->pwm_clk = devm_clk_get(&pdev->dev, "pwm");
+	lpc18xx_pwm->pwm_clk = devm_clk_get_enabled(&pdev->dev, "pwm");
 	if (IS_ERR(lpc18xx_pwm->pwm_clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(lpc18xx_pwm->pwm_clk),
 				     "failed to get pwm clock\n");
 
-	ret = clk_prepare_enable(lpc18xx_pwm->pwm_clk);
-	if (ret < 0)
-		return dev_err_probe(&pdev->dev, ret,
-				     "could not prepare or enable pwm clock\n");
-
 	lpc18xx_pwm->clk_rate = clk_get_rate(lpc18xx_pwm->pwm_clk);
-	if (!lpc18xx_pwm->clk_rate) {
-		ret = dev_err_probe(&pdev->dev,
-				    -EINVAL, "pwm clock has no frequency\n");
-		goto disable_pwmclk;
-	}
+	if (!lpc18xx_pwm->clk_rate)
+		return dev_err_probe(&pdev->dev,
+				     -EINVAL, "pwm clock has no frequency\n");
 
 	/*
 	 * If clkrate is too fast, the calculations in .apply() might overflow.
 	 */
-	if (lpc18xx_pwm->clk_rate > NSEC_PER_SEC) {
-		ret = dev_err_probe(&pdev->dev, -EINVAL, "pwm clock to fast\n");
-		goto disable_pwmclk;
-	}
+	if (lpc18xx_pwm->clk_rate > NSEC_PER_SEC)
+		return dev_err_probe(&pdev->dev, -EINVAL, "pwm clock to fast\n");
 
 	mutex_init(&lpc18xx_pwm->res_lock);
 	mutex_init(&lpc18xx_pwm->period_lock);
@@ -436,18 +427,12 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL, val);
 
 	ret = pwmchip_add(&lpc18xx_pwm->chip);
-	if (ret < 0) {
-		dev_err_probe(&pdev->dev, ret, "pwmchip_add failed\n");
-		goto disable_pwmclk;
-	}
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "pwmchip_add failed\n");
 
 	platform_set_drvdata(pdev, lpc18xx_pwm);
 
 	return 0;
-
-disable_pwmclk:
-	clk_disable_unprepare(lpc18xx_pwm->pwm_clk);
-	return ret;
 }
 
 static void lpc18xx_pwm_remove(struct platform_device *pdev)
@@ -460,8 +445,6 @@ static void lpc18xx_pwm_remove(struct platform_device *pdev)
 	val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_CTRL);
 	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL,
 			   val | LPC18XX_PWM_CTRL_HALT);
-
-	clk_disable_unprepare(lpc18xx_pwm->pwm_clk);
 }
 
 static struct platform_driver lpc18xx_pwm_driver = {