Skip to content

L
linux
Commit 4b0d1f27 authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Shawn Guo
Browse files
Options

ARM: dts: imx: align LED node names with dtschema 

The node names should be generic and DT schema expects certain pattern:

  imx50-kobo-aura.dtb: gpio-leds: 'on' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
  imx6dl-yapp4-draco.dtb: led-controller@30: 'chan@0', 'chan@1', 'chan@2' do not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 91ccc781
Hide whitespace changes
Inline Side-by-side
Showing with 93 additions and 93 deletions
arch/arm/boot/dts/imx50-kobo-aura.dts
View file @ 4b0d1f27
......@@ -26,7 +26,7 @@ gpio-leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
on {
led-on {
label = "kobo_aura:orange:on";
gpios = <&gpio6 24 GPIO_ACTIVE_LOW>;
panic-indicator;
......
arch/arm/boot/dts/imx53-cx9020.dts
View file @ 4b0d1f27
......@@ -86,27 +86,27 @@ tfp410_out: endpoint {
leds {
compatible = "gpio-leds";
pwr-r {
led-pwr-r {
gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
pwr-g {
led-pwr-g {
gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
pwr-b {
led-pwr-b {
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
sd1-b {
led-sd1-b {
linux,default-trigger = "mmc0";
gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
};
sd2-b {
led-sd2-b {
linux,default-trigger = "mmc1";
gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
};
......
arch/arm/boot/dts/imx53-m53evk.dts
View file @ 4b0d1f27
......@@ -52,13 +52,13 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&led_pin_gpio>;
user1 {
led-user1 {
label = "user1";
gpios = <&gpio2 8 0>;
linux,default-trigger = "heartbeat";
};
user2 {
led-user2 {
label = "user2";
gpios = <&gpio2 9 0>;
linux,default-trigger = "heartbeat";
......
arch/arm/boot/dts/imx53-m53menlo.dts
View file @ 4b0d1f27
......@@ -34,19 +34,19 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
user1 {
led-user1 {
label = "TestLed601";
gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
user2 {
led-user2 {
label = "TestLed602";
gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
eth {
led-eth {
label = "EthLedYe";
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "netdev";
......
arch/arm/boot/dts/imx53-tx53.dtsi
View file @ 4b0d1f27
......@@ -94,7 +94,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_stk5led>;
user {
led-user {
label = "Heartbeat";
gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
......
arch/arm/boot/dts/imx53-usbarmory.dts
View file @ 4b0d1f27
......@@ -67,7 +67,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
user {
led-user {
label = "LED";
gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
......
arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
View file @ 4b0d1f27
......@@ -211,17 +211,17 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
alarm1 {
led-alarm1 {
label = "alarm:red";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
alarm2 {
led-alarm2 {
label = "alarm:yellow";
gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
};
alarm3 {
led-alarm3 {
label = "alarm:blue";
gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
};
......
arch/arm/boot/dts/imx6dl-riotboard.dts
View file @ 4b0d1f27
......@@ -25,14 +25,14 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
default-state = "off";
......
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
View file @ 4b0d1f27
......@@ -274,7 +274,7 @@ leds: led-controller@30 {
#address-cells = <1>;
#size-cells = <0>;
chan@0 {
led@0 {
chan-name = "R";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
......@@ -282,7 +282,7 @@ chan@0 {
color = <LED_COLOR_ID_RED>;
};
chan@1 {
led@1 {
chan-name = "G";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
......@@ -290,7 +290,7 @@ chan@1 {
color = <LED_COLOR_ID_GREEN>;
};
chan@2 {
led@2 {
chan-name = "B";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
......
arch/arm/boot/dts/imx6q-gw5400-a.dts
View file @ 4b0d1f27
......@@ -34,20 +34,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
default-state = "off";
......
arch/arm/boot/dts/imx6q-h100.dts
View file @ 4b0d1f27
......@@ -76,19 +76,19 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_h100_leds>;
led0: power {
led0: led-power {
label = "power";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led1: stream {
led1: led-stream {
label = "stream";
gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led2: rec {
led2: led-rec {
label = "rec";
gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
default-state = "off";
......
arch/arm/boot/dts/imx6q-kp.dtsi
View file @ 4b0d1f27
......@@ -66,14 +66,14 @@ lcd_panel_in: endpoint {
leds {
compatible = "gpio-leds";
green {
led-green {
label = "led1";
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "gpio";
default-state = "off";
};
red {
led-red {
label = "led0";
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "gpio";
......
arch/arm/boot/dts/imx6q-marsboard.dts
View file @ 4b0d1f27
......@@ -73,14 +73,14 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
user1 {
led-user1 {
label = "imx6:green:user1";
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "heartbeat";
};
user2 {
led-user2 {
label = "imx6:green:user2";
gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
default-state = "off";
......
arch/arm/boot/dts/imx6q-tbs2910.dts
View file @ 4b0d1f27
......@@ -49,7 +49,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
blue {
led-blue {
label = "blue_status_led";
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
default-state = "keep";
......
arch/arm/boot/dts/imx6qdl-emcon.dtsi
View file @ 4b0d1f27
......@@ -46,14 +46,14 @@ som_leds: leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_som_leds>;
green {
led-green {
label = "som:green";
gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "on";
};
red {
led-red {
label = "som:red";
gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
default-state = "keep";
......
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
View file @ 4b0d1f27
......@@ -71,14 +71,14 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
View file @ 4b0d1f27
......@@ -80,20 +80,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
View file @ 4b0d1f27
......@@ -80,20 +80,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
View file @ 4b0d1f27
......@@ -81,20 +81,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-gw551x.dtsi
View file @ 4b0d1f27
......@@ -115,7 +115,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
default-state = "on";
......
arch/arm/boot/dts/imx6qdl-gw552x.dtsi
View file @ 4b0d1f27
......@@ -72,20 +72,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-gw553x.dtsi
View file @ 4b0d1f27
......@@ -113,14 +113,14 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-gw560x.dtsi
View file @ 4b0d1f27
......@@ -139,20 +139,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-gw5903.dtsi
View file @ 4b0d1f27
......@@ -123,7 +123,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-gw5904.dtsi
View file @ 4b0d1f27
......@@ -120,20 +120,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-gw5907.dtsi
View file @ 4b0d1f27
......@@ -71,14 +71,14 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-gw5910.dtsi
View file @ 4b0d1f27
......@@ -74,20 +74,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-gw5912.dtsi
View file @ 4b0d1f27
......@@ -72,20 +72,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-gw5913.dtsi
View file @ 4b0d1f27
......@@ -71,14 +71,14 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
View file @ 4b0d1f27
......@@ -85,31 +85,31 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
j14-pin1 {
led-j14-pin1 {
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
retain-state-suspended;
default-state = "off";
};
j14-pin3 {
led-j14-pin3 {
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
retain-state-suspended;
default-state = "off";
};
j14-pins8-9 {
led-j14-pins8-9 {
gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
retain-state-suspended;
default-state = "off";
};
j46-pin2 {
led-j46-pin2 {
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
retain-state-suspended;
default-state = "off";
};
j46-pin3 {
led-j46-pin3 {
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
retain-state-suspended;
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
View file @ 4b0d1f27
......@@ -181,13 +181,13 @@ i2c3mux@1 {
leds {
compatible = "gpio-leds";
speaker-enable {
led-speaker-enable {
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
retain-state-suspended;
default-state = "off";
};
ttymxc4-rs232 {
led-ttymxc4-rs232 {
gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
retain-state-suspended;
default-state = "on";
......
arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
View file @ 4b0d1f27
......@@ -25,17 +25,17 @@ gpio_leds: leds {
pinctrl-0 = <&pinctrl_gpioleds>;
status = "disabled";
red {
led-red {
label = "phyboard-mira:red";
gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
};
green {
led-green {
label = "phyboard-mira:green";
gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
};
blue {
led-blue {
label = "phyboard-mira:blue";
gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
......
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
View file @ 4b0d1f27
......@@ -47,12 +47,12 @@ gpio_leds: leds {
pinctrl-0 = <&pinctrl_leds>;
compatible = "gpio-leds";
led_green: green {
led_green: led-green {
label = "phyflex:green";
gpios = <&gpio1 30 0>;
};
led_red: red {
led_red: led-red {
label = "phyflex:red";
gpios = <&gpio2 31 0>;
};
......
arch/arm/boot/dts/imx6qdl-rex.dtsi
View file @ 4b0d1f27
......@@ -55,7 +55,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
led0: usr {
led0: led-usr {
label = "usr";
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
View file @ 4b0d1f27
......@@ -21,7 +21,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
user {
led-user {
label = "debug";
gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
};
......
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
View file @ 4b0d1f27
......@@ -130,7 +130,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
red {
led-red {
gpios = <&gpio1 2 0>;
default-state = "on";
};
......
arch/arm/boot/dts/imx6qdl-ts7970.dtsi
View file @ 4b0d1f27
......@@ -73,13 +73,13 @@ blue-led {
default-state = "off";
};
en-usb-5v {
en-usb-5v-led {
label = "en-usb-5v";
gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
sel_dc_usb {
sel-dc-usb-led {
label = "sel_dc_usb";
gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
......
arch/arm/boot/dts/imx6qdl-tx6.dtsi
View file @ 4b0d1f27
......@@ -92,7 +92,7 @@ power {
leds {
compatible = "gpio-leds";
user_led: user {
user_led: led-user {
label = "Heartbeat";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_user_led>;
......
arch/arm/boot/dts/imx6sl-evk.dts
View file @ 4b0d1f27
......@@ -33,7 +33,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
user {
led-user {
label = "debug";
gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
......
arch/arm/boot/dts/imx6sll-evk.dts
View file @ 4b0d1f27
......@@ -37,7 +37,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
user {
led-user {
label = "debug";
gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
......
arch/arm/boot/dts/imx6sx-sabreauto.dts
View file @ 4b0d1f27
......@@ -20,7 +20,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
user {
led-user {
label = "debug";
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
......
arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
View file @ 4b0d1f27
......@@ -15,14 +15,14 @@ chosen {
leds {
compatible = "gpio-leds";
red {
led-red {
label = "udoo-neo:red:mmc";
gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc0";
};
orange {
led-orange {
label = "udoo-neo:orange:user";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
default-state = "keep";
......
arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
View file @ 4b0d1f27
......@@ -30,7 +30,7 @@ gpio_leds_som: leds {
pinctrl-0 = <&pinctrl_gpioleds_som>;
compatible = "gpio-leds";
phycore-green {
led-phycore-green {
gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
......
arch/arm/boot/dts/imx6ul-tx6ul.dtsi
View file @ 4b0d1f27
......@@ -131,7 +131,7 @@ ds1339: rtc@68 {
leds {
compatible = "gpio-leds";
user_led: user {
user_led: led-user {
label = "Heartbeat";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7