dt-bindings: display/msm: add missing device nodes to mdss-* schemas

Add missing device nodes (DSI, PHYs, DP/eDP) to the existing MDSS
schemas.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508391/
Link: https://lore.kernel.org/r/20221024164225.3236654-12-dmitry.baryshkov@linaro.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml

@@ -43,11 +43,24 @@ patternProperties:
       compatible:
         const: qcom,msm8998-dpu
 
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm-8998
+
 unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
 
@@ -111,5 +124,145 @@ examples:
                 };
             };
         };
+
+        dsi@c994000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0c994000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&mmcc MDSS_BYTE0_CLK>,
+                     <&mmcc MDSS_BYTE0_INTF_CLK>,
+                     <&mmcc MDSS_PCLK0_CLK>,
+                     <&mmcc MDSS_ESC0_CLK>,
+                     <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@c994400 {
+            compatible = "qcom,dsi-phy-10nm-8998";
+            reg = <0x0c994400 0x200>,
+                  <0x0c994600 0x280>,
+                  <0x0c994a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&pm8998_l1>;
+        };
+
+        dsi@c996000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0c996000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&mmcc MDSS_BYTE1_CLK>,
+                     <&mmcc MDSS_BYTE1_INTF_CLK>,
+                     <&mmcc MDSS_PCLK1_CLK>,
+                     <&mmcc MDSS_ESC1_CLK>,
+                     <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@c996400 {
+            compatible = "qcom,dsi-phy-10nm-8998";
+            reg = <0x0c996400 0x200>,
+                  <0x0c996600 0x280>,
+                  <0x0c996a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&pm8998_l1>;
+        };
     };
 ...

Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml

@@ -49,12 +49,25 @@ patternProperties:
       compatible:
         const: qcom,qcm2290-dpu
 
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-ctrl-6g-qcm2290
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-14nm-2290
+
 unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
     #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,qcm2290.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
@@ -113,5 +126,73 @@ examples:
                 };
             };
         };
+
+        dsi@5e94000 {
+            compatible = "qcom,dsi-ctrl-6g-qcm2290";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd QCM2290_VDDCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@5e94400 {
+            compatible = "qcom,dsi-phy-14nm-2290";
+            reg = <0x05e94400 0x100>,
+                  <0x05e94500 0x300>,
+                  <0x05e94800 0x188>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+            vcca-supply = <&vreg_dsi_phy>;
+        };
     };
 ...

Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml

@@ -49,12 +49,31 @@ patternProperties:
       compatible:
         const: qcom,sc7180-dpu
 
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7180-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
 unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
     #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sdm845.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
@@ -121,5 +140,165 @@ examples:
                 };
             };
         };
+
+        dsi@ae94000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC7180_CX>;
+
+            phys = <&dsi_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                    "dsi_phy_lane",
+                    "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sc7180-dp";
+
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+            clock-names = "core_iface", "core_aux", "ctrl_link",
+                          "ctrl_link_iface", "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+            phys = <&dp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd SC7180_CX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    dp_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
     };
 ...

Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml

@@ -48,12 +48,39 @@ patternProperties:
       compatible:
         const: qcom,sc7280-dpu
 
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7280-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,mdss-dsi-ctrl
+
+  "^edp@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7280-edp
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,sc7280-dsi-phy-7nm
+          - qcom,sc7280-edp-phy
+
 unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
     #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sc7280.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
@@ -124,6 +151,271 @@ examples:
                         remote-endpoint = <&edp_in>;
                     };
                 };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            phys = <&mdss_dsi_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss_dsi_phy: phy@ae94400 {
+            compatible = "qcom,sc7280-dsi-phy-7nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x280>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_dsi_supply>;
+        };
+
+        edp@aea0000 {
+            compatible = "qcom,sc7280-edp";
+            pinctrl-names = "default";
+            pinctrl-0 = <&edp_hot_plug_det>;
+
+            reg = <0xaea0000 0x200>,
+                  <0xaea0200 0x200>,
+                  <0xaea0400 0xc00>,
+                  <0xaea1000 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <14>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
+
+            phys = <&mdss_edp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&edp_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    edp_in: endpoint {
+                        remote-endpoint = <&dpu_intf5_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_edp_out: endpoint { };
+                };
+            };
+
+            edp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        mdss_edp_phy: phy@aec2a00 {
+            compatible = "qcom,sc7280-edp-phy";
+
+            reg = <0xaec2a00 0x19c>,
+                  <0xaec2200 0xa0>,
+                  <0xaec2600 0xa0>,
+                  <0xaec2000 0x1c0>;
+
+            clocks = <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_EDP_CLKREF_EN>;
+            clock-names = "aux",
+                          "cfg_ahb";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sc7280-dp";
+
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+            phys = <&dp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dp_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
             };
         };
     };

Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml

@@ -47,12 +47,25 @@ patternProperties:
       compatible:
         const: qcom,sdm845-dpu
 
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
 unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
 
@@ -113,5 +126,145 @@ examples:
                 };
             };
         };
+
+        dsi@ae94000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM845_CX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM845_CX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
     };
 ...