Skip to content

L
linux
Commit 4b60e5f9 authored by Russell King's avatar Russell King
Browse files
Options

Merge branches 'consolidate-clksrc', 'consolidate-flash',... 

Merge branches 'consolidate-clksrc', 'consolidate-flash', 'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
parents e8765afe 667f390b a35d4e58 4d5336d5 041f10d4 be20902b
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 412 additions and 10652 deletions
arch/arm/Kconfig
View file @ 4b60e5f9
......@@ -381,16 +381,6 @@ config ARCH_MXS
help
Support for Freescale MXS-based family of processors
config ARCH_STMP3XXX
bool "Freescale STMP3xxx"
select CPU_ARM926T
select CLKDEV_LOOKUP
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select USB_ARCH_HAS_EHCI
help
Support for systems based on the Freescale 3xxx CPUs.
config ARCH_NETX
bool "Hilscher NetX based"
select CLKSRC_MMIO
......@@ -1018,8 +1008,6 @@ source "arch/arm/mach-exynos4/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
source "arch/arm/plat-stmp3xxx/Kconfig"
source "arch/arm/mach-tegra/Kconfig"
source "arch/arm/mach-u300/Kconfig"
......
arch/arm/Makefile
View file @ 4b60e5f9
......@@ -185,8 +185,6 @@ machine-$(CONFIG_ARCH_EXYNOS4) := exynos4
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
machine-$(CONFIG_ARCH_STMP378X) := stmp378x
machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx
machine-$(CONFIG_ARCH_TCC8K) := tcc8k
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_U300) := u300
......@@ -207,7 +205,6 @@ machine-$(CONFIG_MACH_SPEAR600) := spear6xx
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_S3C64XX) := samsung
plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
plat-$(CONFIG_ARCH_TCC_926) := tcc
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
......
arch/arm/common/sa1111.c
View file @ 4b60e5f9
......@@ -185,14 +185,6 @@ static struct sa1111_dev_info sa1111_devices[] = {
},
};
void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes)
{
unsigned int sz = SZ_1M >> PAGE_SHIFT;
size[1] = size[0] - sz;
size[0] = sz;
}
/*
* SA1111 interrupt support. Since clearing an IRQ while there are
* active IRQs causes the interrupt output to pulse, the upper levels
......
arch/arm/configs/mxs_defconfig 0 → 100644
View file @ 4b60e5f9
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_PERF_EVENTS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MXS=y
CONFIG_MACH_STMP378X_DEVB=y
CONFIG_MACH_TX28=y
# CONFIG_ARM_THUMB is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_AUTO_ZRELADDR=y
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_DEV=m
CONFIG_CAN_FLEXCAN=m
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
# CONFIG_BLK_DEV is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ENC28J60=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=m
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MXS=m
CONFIG_SPI=y
CONFIG_SPI_GPIO=m
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
# CONFIG_MFD_SUPPORT is not set
CONFIG_DISPLAY_SUPPORT=m
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_MXS=y
CONFIG_RTC_CLASS=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_DMADEVICES=y
CONFIG_MXS_DMA=y
CONFIG_EXT3_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_CACHEFILES=m
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_PRINTK_TIME=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_TIMER_STATS=y
CONFIG_PROVE_LOCKING=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_STRICT_DEVMEM=y
CONFIG_DEBUG_USER=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC7=m
arch/arm/configs/realview-smp_defconfig
View file @ 4b60e5f9
......@@ -38,7 +38,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_ARM_INTEGRATOR=y
CONFIG_MTD_PHYSMAP=y
CONFIG_ARM_CHARLCD=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
......
arch/arm/configs/realview_defconfig
View file @ 4b60e5f9
......@@ -37,7 +37,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_ARM_INTEGRATOR=y
CONFIG_MTD_PHYSMAP=y
CONFIG_ARM_CHARLCD=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
......
arch/arm/configs/stmp378x_defconfig deleted 100644 → 0
View file @ e8765afe
CONFIG_EXPERIMENTAL=y
CONFIG_LOCALVERSION="-default"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_STMP3XXX=y
CONFIG_ARCH_STMP378X=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_NET_SCHED=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_MTD=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_NAND=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=6144
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_HW_RANDOM=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_PROVE_LOCKING=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_BOOT_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
arch/arm/configs/stmp37xx_defconfig deleted 100644 → 0
View file @ e8765afe
CONFIG_EXPERIMENTAL=y
CONFIG_LOCALVERSION="-default"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_STMP3XXX=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_NET_SCHED=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=6144
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_HW_RANDOM=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_BOOT_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_DEBUG_LL=y
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
arch/arm/configs/versatile_defconfig
View file @ 4b60e5f9
......@@ -32,7 +32,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_ARM_INTEGRATOR=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_EEPROM_LEGACY=m
CONFIG_NETDEVICES=y
......
arch/arm/include/asm/dma.h
View file @ 4b60e5f9
......@@ -6,8 +6,10 @@
/*
* This is the maximum virtual address which can be DMA'd from.
*/
#ifndef MAX_DMA_ADDRESS
#ifndef ARM_DMA_ZONE_SIZE
#define MAX_DMA_ADDRESS 0xffffffff
#else
#define MAX_DMA_ADDRESS (PAGE_OFFSET + ARM_DMA_ZONE_SIZE)
#endif
#ifdef CONFIG_ISA_DMA_API
......
arch/arm/include/asm/memory.h
View file @ 4b60e5f9
......@@ -209,14 +209,10 @@ static inline unsigned long __phys_to_virt(unsigned long x)
* allocations. This must be the smallest DMA mask in the system,
* so a successful GFP_DMA allocation will always satisfy this.
*/
#ifndef ISA_DMA_THRESHOLD
#ifndef ARM_DMA_ZONE_SIZE
#define ISA_DMA_THRESHOLD (0xffffffffULL)
#endif
#ifndef arch_adjust_zones
#define arch_adjust_zones(size,holes) do { } while (0)
#elif !defined(CONFIG_ZONE_DMA)
#error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA"
#else
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + ARM_DMA_ZONE_SIZE - 1)
#endif
/*
......
arch/arm/include/asm/sizes.h
View file @ 4b60e5f9
......@@ -16,44 +16,6 @@
/* Size definitions
* Copyright (C) ARM Limited 1998. All rights reserved.
*/
#include <asm-generic/sizes.h>
#ifndef __sizes_h
#define __sizes_h 1
/* handy sizes */
#define SZ_16 0x00000010
#define SZ_32 0x00000020
#define SZ_64 0x00000040
#define SZ_128 0x00000080
#define SZ_256 0x00000100
#define SZ_512 0x00000200
#define SZ_1K 0x00000400
#define SZ_2K 0x00000800
#define SZ_4K 0x00001000
#define SZ_8K 0x00002000
#define SZ_16K 0x00004000
#define SZ_32K 0x00008000
#define SZ_64K 0x00010000
#define SZ_128K 0x00020000
#define SZ_256K 0x00040000
#define SZ_512K 0x00080000
#define SZ_1M 0x00100000
#define SZ_2M 0x00200000
#define SZ_4M 0x00400000
#define SZ_8M 0x00800000
#define SZ_16M 0x01000000
#define SZ_32M 0x02000000
#define SZ_48M 0x03000000
#define SZ_64M 0x04000000
#define SZ_128M 0x08000000
#define SZ_256M 0x10000000
#define SZ_512M 0x20000000
#define SZ_1G 0x40000000
#define SZ_2G 0x80000000
#endif
/* END */
#define SZ_48M (SZ_32M + SZ_16M)
arch/arm/include/asm/smp.h
View file @ 4b60e5f9
......@@ -14,8 +14,6 @@
#include <linux/cpumask.h>
#include <linux/thread_info.h>
#include <mach/smp.h>
#ifndef CONFIG_SMP
# error "<asm/smp.h> included in non-SMP build"
#endif
......@@ -47,9 +45,9 @@ extern void smp_init_cpus(void);
/*
* Raise an IPI cross call on CPUs in callmap.
* Provide a function to raise an IPI cross call on CPUs in callmap.
*/
extern void smp_cross_call(const struct cpumask *mask, int ipi);
extern void set_smp_cross_call(void (*)(const struct cpumask *, unsigned int));
/*
* Boot a secondary CPU, and assign it the specified idle task.
......
arch/arm/kernel/smp.c
View file @ 4b60e5f9
......@@ -376,6 +376,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
}
}
static void (*smp_cross_call)(const struct cpumask *, unsigned int);
void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int))
{
smp_cross_call = fn;
}
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
smp_cross_call(mask, IPI_CALL_FUNC);
......
arch/arm/mach-davinci/include/mach/memory.h
View file @ 4b60e5f9
......@@ -41,27 +41,11 @@
*/
#define CONSISTENT_DMA_SIZE (14<<20)
#ifndef __ASSEMBLY__
/*
* Restrict DMA-able region to workaround silicon bug. The bug
* restricts buffers available for DMA to video hardware to be
* below 128M
*/
static inline void
__arch_adjust_zones(unsigned long *size, unsigned long *holes)
{
unsigned int sz = (128<<20) >> PAGE_SHIFT;
size[1] = size[0] - sz;
size[0] = sz;
}
#define arch_adjust_zones(zone_size, holes) \
if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + (128<<20) - 1)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + (128<<20))
#endif
#define ARM_DMA_ZONE_SIZE SZ_128M
#endif /* __ASM_ARCH_MEMORY_H */
arch/arm/mach-exynos4/include/mach/smp.h deleted 100644 → 0
View file @ e8765afe
/* linux/arch/arm/mach-exynos4/include/mach/smp.h
*
* Cloned from arch/arm/mach-realview/include/mach/smp.h
*/
#ifndef ASM_ARCH_SMP_H
#define ASM_ARCH_SMP_H __FILE__
#include <asm/hardware/gic.h>
/*
* We use IRQ1 as the IPI
*/
static inline void smp_cross_call(const struct cpumask *mask, int ipi)
{
gic_raise_softirq(mask, ipi);
}
#endif
arch/arm/mach-exynos4/platsmp.c
View file @ 4b60e5f9
......@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <asm/unified.h>
......@@ -104,7 +105,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
smp_cross_call(cpumask_of(cpu), 1);
gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
......@@ -147,6 +148,8 @@ void __init smp_init_cpus(void)
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
......
arch/arm/mach-h720x/include/mach/memory.h
View file @ 4b60e5f9
......@@ -13,7 +13,6 @@
* There should not be more than (0xd0000000 - 0xc0000000)
* bytes of RAM.
*/
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M)
#define ARM_DMA_ZONE_SIZE SZ_256M
#endif
arch/arm/mach-integrator/integrator_ap.c
View file @ 4b60e5f9
......@@ -31,6 +31,7 @@
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
#include <mach/platform.h>
......@@ -43,7 +44,6 @@
#include <mach/lm.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
......@@ -222,7 +222,7 @@ device_initcall(irq_syscore_init);
#define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
#define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
static int ap_flash_init(void)
static int ap_flash_init(struct platform_device *dev)
{
u32 tmp;
......@@ -239,7 +239,7 @@ static int ap_flash_init(void)
return 0;
}
static void ap_flash_exit(void)
static void ap_flash_exit(struct platform_device *dev)
{
u32 tmp;
......@@ -255,15 +255,14 @@ static void ap_flash_exit(void)
}
}
static void ap_flash_set_vpp(int on)
static void ap_flash_set_vpp(struct platform_device *pdev, int on)
{
void __iomem *reg = on ? SC_CTRLS : SC_CTRLC;
writel(INTEGRATOR_SC_CTRL_nFLVPPEN, reg);
}
static struct flash_platform_data ap_flash_data = {
.map_name = "cfi_probe",
static struct physmap_flash_data ap_flash_data = {
.width = 4,
.init = ap_flash_init,
.exit = ap_flash_exit,
......@@ -277,7 +276,7 @@ static struct resource cfi_flash_resource = {
};
static struct platform_device cfi_flash_device = {
.name = "armflash",
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &ap_flash_data,
......
arch/arm/mach-integrator/integrator_cp.c
View file @ 4b60e5f9
......@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/gfp.h>
#include <linux/clkdev.h>
#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
#include <mach/platform.h>
......@@ -35,7 +36,6 @@
#include <mach/lm.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
......@@ -246,7 +246,7 @@ static struct clk_lookup cp_lookups[] = {
/*
* Flash handling.
*/
static int intcp_flash_init(void)
static int intcp_flash_init(struct platform_device *dev)
{
u32 val;
......@@ -257,7 +257,7 @@ static int intcp_flash_init(void)
return 0;
}
static void intcp_flash_exit(void)
static void intcp_flash_exit(struct platform_device *dev)
{
u32 val;
......@@ -266,7 +266,7 @@ static void intcp_flash_exit(void)
writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
}
static void intcp_flash_set_vpp(int on)
static void intcp_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
......@@ -278,8 +278,7 @@ static void intcp_flash_set_vpp(int on)
writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
}
static struct flash_platform_data intcp_flash_data = {
.map_name = "cfi_probe",
static struct physmap_flash_data intcp_flash_data = {
.width = 4,
.init = intcp_flash_init,
.exit = intcp_flash_exit,
......@@ -293,7 +292,7 @@ static struct resource intcp_flash_resource = {
};
static struct platform_device intcp_flash_device = {
.name = "armflash",
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &intcp_flash_data,
......
arch/arm/mach-ixp4xx/common-pci.c
View file @ 4b60e5f9
......@@ -342,29 +342,6 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
}
/*
* Only first 64MB of memory can be accessed via PCI.
* We use GFP_DMA to allocate safe buffers to do map/unmap.
* This is really ugly and we need a better way of specifying
* DMA-capable regions of memory.
*/
void __init ixp4xx_adjust_zones(unsigned long *zone_size,
unsigned long *zhole_size)
{
unsigned int sz = SZ_64M >> PAGE_SHIFT;
/*
* Only adjust if > 64M on current system
*/
if (zone_size[0] <= sz)
return;
zone_size[1] = zone_size[0] - sz;
zone_size[0] = sz;
zhole_size[1] = zhole_size[0];
zhole_size[0] = 0;
}
void __init ixp4xx_pci_preinit(void)
{
unsigned long cpuid = read_cpuid_id();
......
arch/arm/mach-ixp4xx/include/mach/memory.h
View file @ 4b60e5f9
......@@ -14,16 +14,8 @@
*/
#define PLAT_PHYS_OFFSET UL(0x00000000)
#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
void ixp4xx_adjust_zones(unsigned long *size, unsigned long *holes);
#define arch_adjust_zones(size, holes) \
ixp4xx_adjust_zones(size, holes)
#define ISA_DMA_THRESHOLD (SZ_64M - 1)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
#ifdef CONFIG_PCI
#define ARM_DMA_ZONE_SIZE SZ_64M
#endif
#endif
arch/arm/mach-msm/include/mach/smp.h deleted 100644 → 0
View file @ e8765afe
/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_MSM_SMP_H
#define __ASM_ARCH_MSM_SMP_H
#include <asm/hardware/gic.h>
static inline void smp_cross_call(const struct cpumask *mask, int ipi)
{
gic_raise_softirq(mask, ipi);
}
#endif
arch/arm/mach-msm/platsmp.c
View file @ 4b60e5f9
......@@ -119,7 +119,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
smp_cross_call(cpumask_of(cpu), 1);
gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
......@@ -151,6 +151,8 @@ void __init smp_init_cpus(void)
for (i = 0; i < NR_CPUS; i++)
set_cpu_possible(i, true);
set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
......
arch/arm/mach-mxs/Kconfig
View file @ 4b60e5f9
......@@ -17,6 +17,16 @@ config SOC_IMX28
comment "MXS platforms:"
config MACH_STMP378X_DEVB
bool "Support STMP378x_devb Platform"
select SOC_IMX23
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_MXS_MMC
help
Include support for STMP378x-devb platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX23EVK
bool "Support MX23EVK Platform"
select SOC_IMX23
......
arch/arm/mach-mxs/Makefile
View file @ 4b60e5f9
......@@ -7,6 +7,7 @@ obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
obj-$(CONFIG_MODULE_TX28) += module-tx28.o
......
arch/arm/mach-mxs/mach-stmp378x_devb.c 0 → 100644
View file @ 4b60e5f9
/*
* board setup for STMP378x-Development-Board
*
* based on mx23evk board setup and information gained form the original
* plat-stmp based board setup, now converted to mach-mxs.
*
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/spi/spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/iomux-mx23.h>
#include "devices-mx23.h"
#define STMP378X_DEVB_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30)
#define STMP378X_DEVB_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29)
#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL)
static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = {
/* duart (extended setup missing in old boardcode, too */
MX23_PAD_PWM0__DUART_RX,
MX23_PAD_PWM1__DUART_TX,
/* auart */
MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART,
MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART,
MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART,
MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART,
/* mmc */
MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_CMD__SSP1_CMD |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX23_PAD_SSP1_DETECT__SSP1_DETECT |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
MX23_PAD_SSP1_SCK__SSP1_SCK |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */
MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */
};
static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = {
.wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT,
};
static struct spi_board_info spi_board_info[] __initdata = {
#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
{
.modalias = "enc28j60",
.max_speed_hz = 6 * 1000 * 1000,
.bus_num = 1,
.chip_select = 0,
.platform_data = NULL,
},
#endif
};
static void __init stmp378x_dvb_init(void)
{
int ret;
mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
ARRAY_SIZE(stmp378x_dvb_pads));
mx23_add_duart();
mx23_add_auart0();
/* power on mmc slot */
ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
GPIOF_OUT_INIT_LOW, "mmc0-slot-power");
if (ret)
pr_warn("could not power mmc (%d)\n", ret);
mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
}
static void __init stmp378x_dvb_timer_init(void)
{
mx23_clocks_init();
}
static struct sys_timer stmp378x_dvb_timer = {
.init = stmp378x_dvb_timer_init,
};
MACHINE_START(STMP378X, "STMP378X")
.map_io = mx23_map_io,
.init_irq = mx23_init_irq,
.init_machine = stmp378x_dvb_init,
.timer = &stmp378x_dvb_timer,
MACHINE_END
arch/arm/mach-omap1/flash.c
View file @ 4b60e5f9
......@@ -13,7 +13,7 @@
#include <plat/tc.h>
#include <plat/flash.h>
void omap1_set_vpp(struct map_info *map, int enable)
void omap1_set_vpp(struct platform_device *pdev, int enable)
{
static int count;
u32 l;
......
arch/arm/mach-omap2/include/mach/omap4-common.h
View file @ 4b60e5f9
......@@ -33,4 +33,11 @@ extern void __iomem *gic_dist_base_addr;
extern void __init gic_init_irq(void);
extern void omap_smc1(u32 fn, u32 arg);
#ifdef CONFIG_SMP
/* Needed for secondary core boot */
extern void omap_secondary_startup(void);
extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
extern void omap_auxcoreboot_addr(u32 cpu_addr);
extern u32 omap_read_auxcoreboot0(void);
#endif
#endif
arch/arm/mach-omap2/omap-smp.c
View file @ 4b60e5f9
......@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <asm/cacheflush.h>
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <mach/omap4-common.h>
......@@ -63,7 +64,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
omap_modify_auxcoreboot0(0x200, 0xfffffdff);
flush_cache_all();
smp_wmb();
smp_cross_call(cpumask_of(cpu), 1);
gic_raise_softirq(cpumask_of(cpu), 1);
/*
* Now the secondary core is starting up let it run its
......@@ -118,6 +119,8 @@ void __init smp_init_cpus(void)
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
......
arch/arm/mach-pxa/cm-x2xx-pci.c
View file @ 4b60e5f9
......@@ -29,33 +29,6 @@
unsigned long it8152_base_address;
static int cmx2xx_it8152_irq_gpio;
/*
* Only first 64MB of memory can be accessed via PCI.
* We use GFP_DMA to allocate safe buffers to do map/unmap.
* This is really ugly and we need a better way of specifying
* DMA-capable regions of memory.
*/
void __init cmx2xx_pci_adjust_zones(unsigned long *zone_size,
unsigned long *zhole_size)
{
unsigned int sz = SZ_64M >> PAGE_SHIFT;
if (machine_is_armcore()) {
pr_info("Adjusting zones for CM-X2XX\n");
/*
* Only adjust if > 64M on current system
*/
if (zone_size[0] <= sz)
return;
zone_size[1] = zone_size[0] - sz;
zone_size[0] = sz;
zhole_size[1] = zhole_size[0];
zhole_size[0] = 0;
}
}
static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
{
/* clear our parent irq */
......
arch/arm/mach-pxa/hx4700.c
View file @ 4b60e5f9
......@@ -735,7 +735,7 @@ static struct platform_device bq24022 = {
* StrataFlash
*/
static void hx4700_set_vpp(struct map_info *map, int vpp)
static void hx4700_set_vpp(struct platform_device *pdev, int vpp)
{
gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
}
......
arch/arm/mach-pxa/include/mach/memory.h
View file @ 4b60e5f9
......@@ -17,14 +17,8 @@
*/
#define PLAT_PHYS_OFFSET UL(0xa0000000)
#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes);
#define arch_adjust_zones(size, holes) \
cmx2xx_pci_adjust_zones(size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
#define ARM_DMA_ZONE_SIZE SZ_64M
#endif
#endif
arch/arm/mach-pxa/magician.c
View file @ 4b60e5f9
......@@ -662,7 +662,7 @@ static struct pxaohci_platform_data magician_ohci_info = {
* StrataFlash
*/
static void magician_set_vpp(struct map_info *map, int vpp)
static void magician_set_vpp(struct platform_device *pdev, int vpp)
{
gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
}
......
arch/arm/mach-realview/core.c
View file @ 4b60e5f9
......@@ -31,6 +31,7 @@
#include <linux/amba/mmci.h>
#include <linux/gfp.h>
#include <linux/clkdev.h>
#include <linux/mtd/physmap.h>
#include <asm/system.h>
#include <mach/hardware.h>
......@@ -41,7 +42,6 @@
#include <asm/hardware/icst.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
......@@ -56,48 +56,9 @@
#include "core.h"
#ifdef CONFIG_ZONE_DMA
/*
* Adjust the zones if there are restrictions for DMA access.
*/
void __init realview_adjust_zones(unsigned long *size, unsigned long *hole)
{
unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
if (!machine_is_realview_pbx() || size[0] <= dma_size)
return;
size[ZONE_NORMAL] = size[0] - dma_size;
size[ZONE_DMA] = dma_size;
hole[ZONE_NORMAL] = hole[0];
hole[ZONE_DMA] = 0;
}
#endif
#define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
static int realview_flash_init(void)
{
u32 val;
val = __raw_readl(REALVIEW_FLASHCTRL);
val &= ~REALVIEW_FLASHPROG_FLVPPEN;
__raw_writel(val, REALVIEW_FLASHCTRL);
return 0;
}
static void realview_flash_exit(void)
{
u32 val;
val = __raw_readl(REALVIEW_FLASHCTRL);
val &= ~REALVIEW_FLASHPROG_FLVPPEN;
__raw_writel(val, REALVIEW_FLASHCTRL);
}
static void realview_flash_set_vpp(int on)
static void realview_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
......@@ -109,16 +70,13 @@ static void realview_flash_set_vpp(int on)
__raw_writel(val, REALVIEW_FLASHCTRL);
}
static struct flash_platform_data realview_flash_data = {
.map_name = "cfi_probe",
static struct physmap_flash_data realview_flash_data = {
.width = 4,
.init = realview_flash_init,
.exit = realview_flash_exit,
.set_vpp = realview_flash_set_vpp,
};
struct platform_device realview_flash_device = {
.name = "armflash",
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &realview_flash_data,
......
arch/arm/mach-realview/include/mach/memory.h
View file @ 4b60e5f9
......@@ -29,13 +29,8 @@
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
extern void realview_adjust_zones(unsigned long *size, unsigned long *hole);
#define arch_adjust_zones(size, hole) \
realview_adjust_zones(size, hole)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M)
#ifdef CONFIG_ZONE_DMA
#define ARM_DMA_ZONE_SIZE SZ_256M
#endif
#ifdef CONFIG_SPARSEMEM
......
arch/arm/mach-realview/include/mach/smp.h deleted 100644 → 0
View file @ e8765afe
#ifndef ASMARM_ARCH_SMP_H
#define ASMARM_ARCH_SMP_H
#include <asm/hardware/gic.h>
/*
* We use IRQ1 as the IPI
*/
static inline void smp_cross_call(const struct cpumask *mask, int ipi)
{
gic_raise_softirq(mask, ipi);
}
#endif
arch/arm/mach-realview/platsmp.c
View file @ 4b60e5f9
......@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
#include <asm/unified.h>
......@@ -61,6 +62,8 @@ void __init smp_init_cpus(void)
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
......
arch/arm/mach-s3c2410/nor-simtec.c
View file @ 4b60e5f9
......@@ -32,7 +32,7 @@
#include "nor-simtec.h"
static void simtec_nor_vpp(struct map_info *map, int vpp)
static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
{
unsigned int val;
unsigned long flags;
......
arch/arm/mach-sa1100/include/mach/memory.h
View file @ 4b60e5f9
......@@ -14,18 +14,8 @@
*/
#define PLAT_PHYS_OFFSET UL(0xc0000000)
#ifndef __ASSEMBLY__
#ifdef CONFIG_SA1111
void sa1111_adjust_zones(unsigned long *size, unsigned long *holes);
#define arch_adjust_zones(size, holes) \
sa1111_adjust_zones(size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_1M)
#endif
#define ARM_DMA_ZONE_SIZE SZ_1M
#endif
/*
......
arch/arm/mach-shark/include/mach/memory.h
View file @ 4b60e5f9
......@@ -17,25 +17,7 @@
*/
#define PLAT_PHYS_OFFSET UL(0x08000000)
#ifndef __ASSEMBLY__
static inline void __arch_adjust_zones(unsigned long *zone_size, unsigned long *zhole_size)
{
/* Only the first 4 MB (=1024 Pages) are usable for DMA */
/* See dev / -> .properties in OpenFirmware. */
zone_size[1] = zone_size[0] - 1024;
zone_size[0] = 1024;
zhole_size[1] = zhole_size[0];
zhole_size[0] = 0;
}
#define arch_adjust_zones(size, holes) \
__arch_adjust_zones(size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_4M - 1)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_4M)
#endif
#define ARM_DMA_ZONE_SIZE SZ_4M
/*
* Cache flushing area
......
arch/arm/mach-shmobile/include/mach/smp.h deleted 100644 → 0
View file @ e8765afe
#ifndef __MACH_SMP_H
#define __MACH_SMP_H
#include <asm/hardware/gic.h>
/*
* We use IRQ1 as the IPI
*/
static inline void smp_cross_call(const struct cpumask *mask, int ipi)
{
#if defined(CONFIG_ARM_GIC)
gic_raise_softirq(mask, ipi);
#endif
}
#endif
arch/arm/mach-shmobile/platsmp.c
View file @ 4b60e5f9
......@@ -16,6 +16,7 @@
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <asm/hardware/gic.h>
#include <asm/localtimer.h>
#include <asm/mach-types.h>
#include <mach/common.h>
......@@ -57,6 +58,8 @@ void __init smp_init_cpus(void)
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
......
arch/arm/mach-stmp378x/Makefile deleted 100644 → 0
View file @ e8765afe
obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o
obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o
arch/arm/mach-stmp378x/Makefile.boot deleted 100644 → 0
View file @ e8765afe
zreladdr-y := 0x40008000
params_phys-y := 0x40000100
initrd_phys-y := 0x40800000
arch/arm/mach-stmp378x/include/mach/entry-macro.S deleted 100644 → 0
View file @ e8765afe
/*
* Low-level IRQ helper macros for Freescale STMP378X
*
* Embedded Alley Solutions, Inc <source@embeddedalley.com>
*
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \base, #0xf0000000 @ vm address of IRQ controller
ldr \irqnr, [\base, #0x70] @ HW_ICOLL_STAT
cmp \irqnr, #0x7f
moveqs \irqnr, #0 @ Zero flag set for no IRQ
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-stmp378x/include/mach/irqs.h deleted 100644 → 0
View file @ e8765afe
/*
* Freescale STMP378X interrupts
*
* Copyright (C) 2005 Sigmatel Inc
*
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#define IRQ_DEBUG_UART 0
#define IRQ_COMMS_RX 1
#define IRQ_COMMS_TX 1
#define IRQ_SSP2_ERROR 2
#define IRQ_VDD5V 3
#define IRQ_HEADPHONE_SHORT 4
#define IRQ_DAC_DMA 5
#define IRQ_DAC_ERROR 6
#define IRQ_ADC_DMA 7
#define IRQ_ADC_ERROR 8
#define IRQ_SPDIF_DMA 9
#define IRQ_SAIF2_DMA 9
#define IRQ_SPDIF_ERROR 10
#define IRQ_SAIF1_IRQ 10
#define IRQ_SAIF2_IRQ 10
#define IRQ_USB_CTRL 11
#define IRQ_USB_WAKEUP 12
#define IRQ_GPMI_DMA 13
#define IRQ_SSP1_DMA 14
#define IRQ_SSP_ERROR 15
#define IRQ_GPIO0 16
#define IRQ_GPIO1 17
#define IRQ_GPIO2 18
#define IRQ_SAIF1_DMA 19
#define IRQ_SSP2_DMA 20
#define IRQ_ECC8_IRQ 21
#define IRQ_RTC_ALARM 22
#define IRQ_UARTAPP_TX_DMA 23
#define IRQ_UARTAPP_INTERNAL 24
#define IRQ_UARTAPP_RX_DMA 25
#define IRQ_I2C_DMA 26
#define IRQ_I2C_ERROR 27
#define IRQ_TIMER0 28
#define IRQ_TIMER1 29
#define IRQ_TIMER2 30
#define IRQ_TIMER3 31
#define IRQ_BATT_BRNOUT 32
#define IRQ_VDDD_BRNOUT 33
#define IRQ_VDDIO_BRNOUT 34
#define IRQ_VDD18_BRNOUT 35
#define IRQ_TOUCH_DETECT 36
#define IRQ_LRADC_CH0 37
#define IRQ_LRADC_CH1 38
#define IRQ_LRADC_CH2 39
#define IRQ_LRADC_CH3 40
#define IRQ_LRADC_CH4 41
#define IRQ_LRADC_CH5 42
#define IRQ_LRADC_CH6 43
#define IRQ_LRADC_CH7 44
#define IRQ_LCDIF_DMA 45
#define IRQ_LCDIF_ERROR 46
#define IRQ_DIGCTL_DEBUG_TRAP 47
#define IRQ_RTC_1MSEC 48
#define IRQ_DRI_DMA 49
#define IRQ_DRI_ATTENTION 50
#define IRQ_GPMI_ATTENTION 51
#define IRQ_IR 52
#define IRQ_DCP_VMI 53
#define IRQ_DCP 54
#define IRQ_BCH 56
#define IRQ_PXP 57
#define IRQ_UARTAPP2_TX_DMA 58
#define IRQ_UARTAPP2_INTERNAL 59
#define IRQ_UARTAPP2_RX_DMA 60
#define IRQ_VDAC_DETECT 61
#define IRQ_VDD5V_DROOP 64
#define IRQ_DCDC4P2_BO 65
#define NR_REAL_IRQS 128
#define NR_IRQS (NR_REAL_IRQS + 32 * 3)
/* All interrupts are FIQ capable */
#define FIQ_START IRQ_DEBUG_UART
/* Hard disk IRQ is a GPMI attention IRQ */
#define IRQ_HARDDISK IRQ_GPMI_ATTENTION
arch/arm/mach-stmp378x/include/mach/pins.h deleted 100644 → 0
View file @ e8765afe
/*
* Freescale STMP378X SoC pin multiplexing
*
* Author: Vladislav Buzov <vbuzov@embeddedalley.com>
*
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#ifndef __ASM_ARCH_PINS_H
#define __ASM_ARCH_PINS_H
/*
* Define all STMP378x pins, a pin name corresponds to a STMP378x hardware
* interface this pin belongs to.
*/
/* Bank 0 */
#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0)
#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1)
#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2)
#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3)
#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4)
#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5)
#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6)
#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7)
#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8)
#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9)
#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10)
#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11)
#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12)
#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13)
#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14)
#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15)
#define PINID_GPMI_CLE STMP3XXX_PINID(0, 16)
#define PINID_GPMI_ALE STMP3XXX_PINID(0, 17)
#define PINID_GMPI_CE2N STMP3XXX_PINID(0, 18)
#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19)
#define PINID_GPMI_RDY1 STMP3XXX_PINID(0, 20)
#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 21)
#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 22)
#define PINID_GPMI_WPN STMP3XXX_PINID(0, 23)
#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24)
#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25)
#define PINID_AUART1_CTS STMP3XXX_PINID(0, 26)
#define PINID_AUART1_RTS STMP3XXX_PINID(0, 27)
#define PINID_AUART1_RX STMP3XXX_PINID(0, 28)
#define PINID_AUART1_TX STMP3XXX_PINID(0, 29)
#define PINID_I2C_SCL STMP3XXX_PINID(0, 30)
#define PINID_I2C_SDA STMP3XXX_PINID(0, 31)
/* Bank 1 */
#define PINID_LCD_D00 STMP3XXX_PINID(1, 0)
#define PINID_LCD_D01 STMP3XXX_PINID(1, 1)
#define PINID_LCD_D02 STMP3XXX_PINID(1, 2)
#define PINID_LCD_D03 STMP3XXX_PINID(1, 3)
#define PINID_LCD_D04 STMP3XXX_PINID(1, 4)
#define PINID_LCD_D05 STMP3XXX_PINID(1, 5)
#define PINID_LCD_D06 STMP3XXX_PINID(1, 6)
#define PINID_LCD_D07 STMP3XXX_PINID(1, 7)
#define PINID_LCD_D08 STMP3XXX_PINID(1, 8)
#define PINID_LCD_D09 STMP3XXX_PINID(1, 9)
#define PINID_LCD_D10 STMP3XXX_PINID(1, 10)
#define PINID_LCD_D11 STMP3XXX_PINID(1, 11)
#define PINID_LCD_D12 STMP3XXX_PINID(1, 12)
#define PINID_LCD_D13 STMP3XXX_PINID(1, 13)
#define PINID_LCD_D14 STMP3XXX_PINID(1, 14)
#define PINID_LCD_D15 STMP3XXX_PINID(1, 15)
#define PINID_LCD_D16 STMP3XXX_PINID(1, 16)
#define PINID_LCD_D17 STMP3XXX_PINID(1, 17)
#define PINID_LCD_RESET STMP3XXX_PINID(1, 18)
#define PINID_LCD_RS STMP3XXX_PINID(1, 19)
#define PINID_LCD_WR STMP3XXX_PINID(1, 20)
#define PINID_LCD_CS STMP3XXX_PINID(1, 21)
#define PINID_LCD_DOTCK STMP3XXX_PINID(1, 22)
#define PINID_LCD_ENABLE STMP3XXX_PINID(1, 23)
#define PINID_LCD_HSYNC STMP3XXX_PINID(1, 24)
#define PINID_LCD_VSYNC STMP3XXX_PINID(1, 25)
#define PINID_PWM0 STMP3XXX_PINID(1, 26)
#define PINID_PWM1 STMP3XXX_PINID(1, 27)
#define PINID_PWM2 STMP3XXX_PINID(1, 28)
#define PINID_PWM3 STMP3XXX_PINID(1, 29)
#define PINID_PWM4 STMP3XXX_PINID(1, 30)
/* Bank 2 */
#define PINID_SSP1_CMD STMP3XXX_PINID(2, 0)
#define PINID_SSP1_DETECT STMP3XXX_PINID(2, 1)
#define PINID_SSP1_DATA0 STMP3XXX_PINID(2, 2)
#define PINID_SSP1_DATA1 STMP3XXX_PINID(2, 3)
#define PINID_SSP1_DATA2 STMP3XXX_PINID(2, 4)
#define PINID_SSP1_DATA3 STMP3XXX_PINID(2, 5)
#define PINID_SSP1_SCK STMP3XXX_PINID(2, 6)
#define PINID_ROTARYA STMP3XXX_PINID(2, 7)
#define PINID_ROTARYB STMP3XXX_PINID(2, 8)
#define PINID_EMI_A00 STMP3XXX_PINID(2, 9)
#define PINID_EMI_A01 STMP3XXX_PINID(2, 10)
#define PINID_EMI_A02 STMP3XXX_PINID(2, 11)
#define PINID_EMI_A03 STMP3XXX_PINID(2, 12)
#define PINID_EMI_A04 STMP3XXX_PINID(2, 13)
#define PINID_EMI_A05 STMP3XXX_PINID(2, 14)
#define PINID_EMI_A06 STMP3XXX_PINID(2, 15)
#define PINID_EMI_A07 STMP3XXX_PINID(2, 16)
#define PINID_EMI_A08 STMP3XXX_PINID(2, 17)
#define PINID_EMI_A09 STMP3XXX_PINID(2, 18)
#define PINID_EMI_A10 STMP3XXX_PINID(2, 19)
#define PINID_EMI_A11 STMP3XXX_PINID(2, 20)
#define PINID_EMI_A12 STMP3XXX_PINID(2, 21)
#define PINID_EMI_BA0 STMP3XXX_PINID(2, 22)
#define PINID_EMI_BA1 STMP3XXX_PINID(2, 23)
#define PINID_EMI_CASN STMP3XXX_PINID(2, 24)
#define PINID_EMI_CE0N STMP3XXX_PINID(2, 25)
#define PINID_EMI_CE1N STMP3XXX_PINID(2, 26)
#define PINID_GPMI_CE1N STMP3XXX_PINID(2, 27)
#define PINID_GPMI_CE0N STMP3XXX_PINID(2, 28)
#define PINID_EMI_CKE STMP3XXX_PINID(2, 29)
#define PINID_EMI_RASN STMP3XXX_PINID(2, 30)
#define PINID_EMI_WEN STMP3XXX_PINID(2, 31)
/* Bank 3 */
#define PINID_EMI_D00 STMP3XXX_PINID(3, 0)
#define PINID_EMI_D01 STMP3XXX_PINID(3, 1)
#define PINID_EMI_D02 STMP3XXX_PINID(3, 2)
#define PINID_EMI_D03 STMP3XXX_PINID(3, 3)
#define PINID_EMI_D04 STMP3XXX_PINID(3, 4)
#define PINID_EMI_D05 STMP3XXX_PINID(3, 5)
#define PINID_EMI_D06 STMP3XXX_PINID(3, 6)
#define PINID_EMI_D07 STMP3XXX_PINID(3, 7)
#define PINID_EMI_D08 STMP3XXX_PINID(3, 8)
#define PINID_EMI_D09 STMP3XXX_PINID(3, 9)
#define PINID_EMI_D10 STMP3XXX_PINID(3, 10)
#define PINID_EMI_D11 STMP3XXX_PINID(3, 11)
#define PINID_EMI_D12 STMP3XXX_PINID(3, 12)
#define PINID_EMI_D13 STMP3XXX_PINID(3, 13)
#define PINID_EMI_D14 STMP3XXX_PINID(3, 14)
#define PINID_EMI_D15 STMP3XXX_PINID(3, 15)
#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 16)
#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 17)
#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 18)
#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 19)
#define PINID_EMI_CLK STMP3XXX_PINID(3, 20)
#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21)
#endif /* __ASM_ARCH_PINS_H */
arch/arm/mach-stmp378x/include/mach/regs-apbh.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: APBH register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _MACH_REGS_APBH
#define _MACH_REGS_APBH
#define REGS_APBH_BASE (STMP3XXX_REGS_BASE + 0x4000)
#define REGS_APBH_PHYS 0x80004000
#define REGS_APBH_SIZE 0x2000
#define HW_APBH_CTRL0 0x0
#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000
#define BP_APBH_CTRL0_RESET_CHANNEL 16
#define BM_APBH_CTRL0_CLKGATE 0x40000000
#define BM_APBH_CTRL0_SFTRST 0x80000000
#define HW_APBH_CTRL1 0x10
#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001
#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0
#define HW_APBH_CTRL2 0x20
#define HW_APBH_DEVSEL 0x30
#define HW_APBH_CH0_NXTCMDAR (0x50 + 0 * 0x70)
#define HW_APBH_CH1_NXTCMDAR (0x50 + 1 * 0x70)
#define HW_APBH_CH2_NXTCMDAR (0x50 + 2 * 0x70)
#define HW_APBH_CH3_NXTCMDAR (0x50 + 3 * 0x70)
#define HW_APBH_CH4_NXTCMDAR (0x50 + 4 * 0x70)
#define HW_APBH_CH5_NXTCMDAR (0x50 + 5 * 0x70)
#define HW_APBH_CH6_NXTCMDAR (0x50 + 6 * 0x70)
#define HW_APBH_CH7_NXTCMDAR (0x50 + 7 * 0x70)
#define HW_APBH_CH8_NXTCMDAR (0x50 + 8 * 0x70)
#define HW_APBH_CH9_NXTCMDAR (0x50 + 9 * 0x70)
#define HW_APBH_CH10_NXTCMDAR (0x50 + 10 * 0x70)
#define HW_APBH_CH11_NXTCMDAR (0x50 + 11 * 0x70)
#define HW_APBH_CH12_NXTCMDAR (0x50 + 12 * 0x70)
#define HW_APBH_CH13_NXTCMDAR (0x50 + 13 * 0x70)
#define HW_APBH_CH14_NXTCMDAR (0x50 + 14 * 0x70)
#define HW_APBH_CH15_NXTCMDAR (0x50 + 15 * 0x70)
#define HW_APBH_CHn_NXTCMDAR 0x50
#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER 0
#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE 1
#define BV_APBH_CHn_CMD_COMMAND__DMA_READ 2
#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE 3
#define BM_APBH_CHn_CMD_COMMAND 0x00000003
#define BP_APBH_CHn_CMD_COMMAND 0
#define BM_APBH_CHn_CMD_CHAIN 0x00000004
#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008
#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010
#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020
#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040
#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080
#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000
#define BP_APBH_CHn_CMD_CMDWORDS 12
#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000
#define BP_APBH_CHn_CMD_XFER_COUNT 16
#define HW_APBH_CH0_SEMA (0x80 + 0 * 0x70)
#define HW_APBH_CH1_SEMA (0x80 + 1 * 0x70)
#define HW_APBH_CH2_SEMA (0x80 + 2 * 0x70)
#define HW_APBH_CH3_SEMA (0x80 + 3 * 0x70)
#define HW_APBH_CH4_SEMA (0x80 + 4 * 0x70)
#define HW_APBH_CH5_SEMA (0x80 + 5 * 0x70)
#define HW_APBH_CH6_SEMA (0x80 + 6 * 0x70)
#define HW_APBH_CH7_SEMA (0x80 + 7 * 0x70)
#define HW_APBH_CH8_SEMA (0x80 + 8 * 0x70)
#define HW_APBH_CH9_SEMA (0x80 + 9 * 0x70)
#define HW_APBH_CH10_SEMA (0x80 + 10 * 0x70)
#define HW_APBH_CH11_SEMA (0x80 + 11 * 0x70)
#define HW_APBH_CH12_SEMA (0x80 + 12 * 0x70)
#define HW_APBH_CH13_SEMA (0x80 + 13 * 0x70)
#define HW_APBH_CH14_SEMA (0x80 + 14 * 0x70)
#define HW_APBH_CH15_SEMA (0x80 + 15 * 0x70)
#define HW_APBH_CHn_SEMA 0x80
#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF
#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0
#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000
#define BP_APBH_CHn_SEMA_PHORE 16
#endif
arch/arm/mach-stmp378x/include/mach/regs-apbx.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: APBX register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _MACH_REGS_APBX
#define _MACH_REGS_APBX
#define REGS_APBX_BASE (STMP3XXX_REGS_BASE + 0x24000)
#define REGS_APBX_PHYS 0x80024000
#define REGS_APBX_SIZE 0x2000
#define HW_APBX_CTRL0 0x0
#define BM_APBX_CTRL0_CLKGATE 0x40000000
#define BM_APBX_CTRL0_SFTRST 0x80000000
#define HW_APBX_CTRL1 0x10
#define HW_APBX_CTRL2 0x20
#define HW_APBX_CHANNEL_CTRL 0x30
#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL 0xFFFF0000
#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL 16
#define HW_APBX_DEVSEL 0x40
#define HW_APBX_CH0_NXTCMDAR (0x110 + 0 * 0x70)
#define HW_APBX_CH1_NXTCMDAR (0x110 + 1 * 0x70)
#define HW_APBX_CH2_NXTCMDAR (0x110 + 2 * 0x70)
#define HW_APBX_CH3_NXTCMDAR (0x110 + 3 * 0x70)
#define HW_APBX_CH4_NXTCMDAR (0x110 + 4 * 0x70)
#define HW_APBX_CH5_NXTCMDAR (0x110 + 5 * 0x70)
#define HW_APBX_CH6_NXTCMDAR (0x110 + 6 * 0x70)
#define HW_APBX_CH7_NXTCMDAR (0x110 + 7 * 0x70)
#define HW_APBX_CH8_NXTCMDAR (0x110 + 8 * 0x70)
#define HW_APBX_CH9_NXTCMDAR (0x110 + 9 * 0x70)
#define HW_APBX_CH10_NXTCMDAR (0x110 + 10 * 0x70)
#define HW_APBX_CH11_NXTCMDAR (0x110 + 11 * 0x70)
#define HW_APBX_CH12_NXTCMDAR (0x110 + 12 * 0x70)
#define HW_APBX_CH13_NXTCMDAR (0x110 + 13 * 0x70)
#define HW_APBX_CH14_NXTCMDAR (0x110 + 14 * 0x70)
#define HW_APBX_CH15_NXTCMDAR (0x110 + 15 * 0x70)
#define HW_APBX_CHn_NXTCMDAR 0x110
#define BM_APBX_CHn_CMD_COMMAND 0x00000003
#define BP_APBX_CHn_CMD_COMMAND 0
#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER 0
#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE 1
#define BV_APBX_CHn_CMD_COMMAND__DMA_READ 2
#define BV_APBX_CHn_CMD_COMMAND__DMA_SENSE 3
#define BM_APBX_CHn_CMD_CHAIN 0x00000004
#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008
#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040
#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080
#define BM_APBX_CHn_CMD_HALTONTERMINATE 0x00000100
#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000
#define BP_APBX_CHn_CMD_CMDWORDS 12
#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000
#define BP_APBX_CHn_CMD_XFER_COUNT 16
#define HW_APBX_CH0_BAR (0x130 + 0 * 0x70)
#define HW_APBX_CH1_BAR (0x130 + 1 * 0x70)
#define HW_APBX_CH2_BAR (0x130 + 2 * 0x70)
#define HW_APBX_CH3_BAR (0x130 + 3 * 0x70)
#define HW_APBX_CH4_BAR (0x130 + 4 * 0x70)
#define HW_APBX_CH5_BAR (0x130 + 5 * 0x70)
#define HW_APBX_CH6_BAR (0x130 + 6 * 0x70)
#define HW_APBX_CH7_BAR (0x130 + 7 * 0x70)
#define HW_APBX_CH8_BAR (0x130 + 8 * 0x70)
#define HW_APBX_CH9_BAR (0x130 + 9 * 0x70)
#define HW_APBX_CH10_BAR (0x130 + 10 * 0x70)
#define HW_APBX_CH11_BAR (0x130 + 11 * 0x70)
#define HW_APBX_CH12_BAR (0x130 + 12 * 0x70)
#define HW_APBX_CH13_BAR (0x130 + 13 * 0x70)
#define HW_APBX_CH14_BAR (0x130 + 14 * 0x70)
#define HW_APBX_CH15_BAR (0x130 + 15 * 0x70)
#define HW_APBX_CHn_BAR 0x130
#define HW_APBX_CH0_SEMA (0x140 + 0 * 0x70)
#define HW_APBX_CH1_SEMA (0x140 + 1 * 0x70)
#define HW_APBX_CH2_SEMA (0x140 + 2 * 0x70)
#define HW_APBX_CH3_SEMA (0x140 + 3 * 0x70)
#define HW_APBX_CH4_SEMA (0x140 + 4 * 0x70)
#define HW_APBX_CH5_SEMA (0x140 + 5 * 0x70)
#define HW_APBX_CH6_SEMA (0x140 + 6 * 0x70)
#define HW_APBX_CH7_SEMA (0x140 + 7 * 0x70)
#define HW_APBX_CH8_SEMA (0x140 + 8 * 0x70)
#define HW_APBX_CH9_SEMA (0x140 + 9 * 0x70)
#define HW_APBX_CH10_SEMA (0x140 + 10 * 0x70)
#define HW_APBX_CH11_SEMA (0x140 + 11 * 0x70)
#define HW_APBX_CH12_SEMA (0x140 + 12 * 0x70)
#define HW_APBX_CH13_SEMA (0x140 + 13 * 0x70)
#define HW_APBX_CH14_SEMA (0x140 + 14 * 0x70)
#define HW_APBX_CH15_SEMA (0x140 + 15 * 0x70)
#define HW_APBX_CHn_SEMA 0x140
#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF
#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0
#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000
#define BP_APBX_CHn_SEMA_PHORE 16
#endif
arch/arm/mach-stmp378x/include/mach/regs-audioin.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: AUDIOIN register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_AUDIOIN_BASE (STMP3XXX_REGS_BASE + 0x4C000)
#define REGS_AUDIOIN_PHYS 0x8004C000
#define REGS_AUDIOIN_SIZE 0x2000
#define HW_AUDIOIN_CTRL 0x0
#define BM_AUDIOIN_CTRL_RUN 0x00000001
#define BP_AUDIOIN_CTRL_RUN 0
#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
#define BM_AUDIOIN_CTRL_WORD_LENGTH 0x00000020
#define BM_AUDIOIN_CTRL_CLKGATE 0x40000000
#define BM_AUDIOIN_CTRL_SFTRST 0x80000000
#define HW_AUDIOIN_STAT 0x10
#define HW_AUDIOIN_ADCSRR 0x20
#define HW_AUDIOIN_ADCVOLUME 0x30
#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0x000000FF
#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0
#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT 0x00FF0000
#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT 16
#define HW_AUDIOIN_ADCDEBUG 0x40
#define HW_AUDIOIN_ADCVOL 0x50
#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT 0x0000000F
#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT 0
#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT 0x00000030
#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT 4
#define BM_AUDIOIN_ADCVOL_GAIN_LEFT 0x00000F00
#define BP_AUDIOIN_ADCVOL_GAIN_LEFT 8
#define BM_AUDIOIN_ADCVOL_SELECT_LEFT 0x00003000
#define BP_AUDIOIN_ADCVOL_SELECT_LEFT 12
#define BM_AUDIOIN_ADCVOL_MUTE 0x01000000
#define HW_AUDIOIN_MICLINE 0x60
#define HW_AUDIOIN_ANACLKCTRL 0x70
#define BM_AUDIOIN_ANACLKCTRL_CLKGATE 0x80000000
#define HW_AUDIOIN_DATA 0x80
arch/arm/mach-stmp378x/include/mach/regs-audioout.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: AUDIOOUT register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_AUDIOOUT_BASE (STMP3XXX_REGS_BASE + 0x48000)
#define REGS_AUDIOOUT_PHYS 0x80048000
#define REGS_AUDIOOUT_SIZE 0x2000
#define HW_AUDIOOUT_CTRL 0x0
#define BM_AUDIOOUT_CTRL_RUN 0x00000001
#define BP_AUDIOOUT_CTRL_RUN 0
#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
#define BM_AUDIOOUT_CTRL_WORD_LENGTH 0x00000040
#define BM_AUDIOOUT_CTRL_CLKGATE 0x40000000
#define BM_AUDIOOUT_CTRL_SFTRST 0x80000000
#define HW_AUDIOOUT_STAT 0x10
#define HW_AUDIOOUT_DACSRR 0x20
#define BM_AUDIOOUT_DACSRR_SRC_FRAC 0x00001FFF
#define BP_AUDIOOUT_DACSRR_SRC_FRAC 0
#define BM_AUDIOOUT_DACSRR_SRC_INT 0x001F0000
#define BP_AUDIOOUT_DACSRR_SRC_INT 16
#define BM_AUDIOOUT_DACSRR_SRC_HOLD 0x07000000
#define BP_AUDIOOUT_DACSRR_SRC_HOLD 24
#define BM_AUDIOOUT_DACSRR_BASEMULT 0x70000000
#define BP_AUDIOOUT_DACSRR_BASEMULT 28
#define HW_AUDIOOUT_DACVOLUME 0x30
#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT 0x00000100
#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT 0x01000000
#define BM_AUDIOOUT_DACVOLUME_EN_ZCD 0x02000000
#define HW_AUDIOOUT_DACDEBUG 0x40
#define HW_AUDIOOUT_HPVOL 0x50
#define BM_AUDIOOUT_HPVOL_MUTE 0x01000000
#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD 0x02000000
#define HW_AUDIOOUT_PWRDN 0x70
#define BM_AUDIOOUT_PWRDN_HEADPHONE 0x00000001
#define BP_AUDIOOUT_PWRDN_HEADPHONE 0
#define BM_AUDIOOUT_PWRDN_CAPLESS 0x00000010
#define BM_AUDIOOUT_PWRDN_ADC 0x00000100
#define BM_AUDIOOUT_PWRDN_DAC 0x00001000
#define BM_AUDIOOUT_PWRDN_RIGHT_ADC 0x00010000
#define BM_AUDIOOUT_PWRDN_SPEAKER 0x01000000
#define HW_AUDIOOUT_REFCTRL 0x80
#define BM_AUDIOOUT_REFCTRL_VAG_VAL 0x000000F0
#define BP_AUDIOOUT_REFCTRL_VAG_VAL 4
#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL 0x00000F00
#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL 8
#define BM_AUDIOOUT_REFCTRL_ADJ_VAG 0x00001000
#define BM_AUDIOOUT_REFCTRL_ADJ_ADC 0x00002000
#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL 0x00030000
#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL 16
#define BM_AUDIOOUT_REFCTRL_LOW_PWR 0x00080000
#define BM_AUDIOOUT_REFCTRL_VBG_ADJ 0x00700000
#define BP_AUDIOOUT_REFCTRL_VBG_ADJ 20
#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS 0x01000000
#define BM_AUDIOOUT_REFCTRL_RAISE_REF 0x02000000
#define HW_AUDIOOUT_ANACTRL 0x90
#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB 0x00000010
#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND 0x00000020
#define HW_AUDIOOUT_TEST 0xA0
#define BM_AUDIOOUT_TEST_HP_I1_ADJ 0x00C00000
#define BP_AUDIOOUT_TEST_HP_I1_ADJ 22
#define HW_AUDIOOUT_BISTCTRL 0xB0
#define HW_AUDIOOUT_BISTSTAT0 0xC0
#define HW_AUDIOOUT_BISTSTAT1 0xD0
#define HW_AUDIOOUT_ANACLKCTRL 0xE0
#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE 0x80000000
#define HW_AUDIOOUT_DATA 0xF0
#define HW_AUDIOOUT_SPEAKERCTRL 0x100
#define BM_AUDIOOUT_SPEAKERCTRL_MUTE 0x01000000
#define HW_AUDIOOUT_VERSION 0x200
arch/arm/mach-stmp378x/include/mach/regs-bch.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: BCH register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_BCH_BASE (STMP3XXX_REGS_BASE + 0xA000)
#define REGS_BCH_PHYS 0x8000A000
#define REGS_BCH_SIZE 0x2000
#define HW_BCH_CTRL 0x0
#define BM_BCH_CTRL_COMPLETE_IRQ 0x00000001
#define BP_BCH_CTRL_COMPLETE_IRQ 0
#define BM_BCH_CTRL_COMPLETE_IRQ_EN 0x00000100
#define HW_BCH_STATUS0 0x10
#define BM_BCH_STATUS0_UNCORRECTABLE 0x00000004
#define BM_BCH_STATUS0_CORRECTED 0x00000008
#define BM_BCH_STATUS0_STATUS_BLK0 0x0000FF00
#define BP_BCH_STATUS0_STATUS_BLK0 8
#define BM_BCH_STATUS0_COMPLETED_CE 0x000F0000
#define BP_BCH_STATUS0_COMPLETED_CE 16
#define HW_BCH_LAYOUTSELECT 0x70
#define HW_BCH_FLASH0LAYOUT0 0x80
#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE 0x00000FFF
#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0
#define BM_BCH_FLASH0LAYOUT0_ECC0 0x0000F000
#define BP_BCH_FLASH0LAYOUT0_ECC0 12
#define BM_BCH_FLASH0LAYOUT0_META_SIZE 0x00FF0000
#define BP_BCH_FLASH0LAYOUT0_META_SIZE 16
#define BM_BCH_FLASH0LAYOUT0_NBLOCKS 0xFF000000
#define BP_BCH_FLASH0LAYOUT0_NBLOCKS 24
#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE 0x00000FFF
#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0
#define BM_BCH_FLASH0LAYOUT1_ECCN 0x0000F000
#define BP_BCH_FLASH0LAYOUT1_ECCN 12
#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE 0xFFFF0000
#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE 16
#define HW_BCH_BLOCKNAME 0x150
arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: CLKCTRL register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _MACH_REGS_CLKCTRL
#define _MACH_REGS_CLKCTRL
#define REGS_CLKCTRL_BASE (STMP3XXX_REGS_BASE + 0x40000)
#define REGS_CLKCTRL_PHYS 0x80040000
#define REGS_CLKCTRL_SIZE 0x2000
#define HW_CLKCTRL_PLLCTRL0 0x0
#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000
#define HW_CLKCTRL_CPU 0x20
#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
#define BP_CLKCTRL_CPU_DIV_CPU 0
#define HW_CLKCTRL_HBUS 0x30
#define BM_CLKCTRL_HBUS_DIV 0x0000001F
#define BP_CLKCTRL_HBUS_DIV 0
#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020
#define HW_CLKCTRL_XBUS 0x40
#define HW_CLKCTRL_XTAL 0x50
#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE 0x10000000
#define HW_CLKCTRL_PIX 0x60
#define BM_CLKCTRL_PIX_DIV 0x00000FFF
#define BP_CLKCTRL_PIX_DIV 0
#define BM_CLKCTRL_PIX_CLKGATE 0x80000000
#define HW_CLKCTRL_SSP 0x70
#define HW_CLKCTRL_GPMI 0x80
#define HW_CLKCTRL_SPDIF 0x90
#define HW_CLKCTRL_EMI 0xA0
#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F
#define BP_CLKCTRL_EMI_DIV_EMI 0
#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000
#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000
#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000
#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000
#define HW_CLKCTRL_IR 0xB0
#define HW_CLKCTRL_SAIF 0xC0
#define HW_CLKCTRL_TV 0xD0
#define HW_CLKCTRL_ETM 0xE0
#define HW_CLKCTRL_FRAC 0xF0
#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00
#define BP_CLKCTRL_FRAC_EMIFRAC 8
#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000
#define BP_CLKCTRL_FRAC_PIXFRAC 16
#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000
#define HW_CLKCTRL_FRAC1 0x100
#define HW_CLKCTRL_CLKSEQ 0x110
#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002
#define HW_CLKCTRL_RESET 0x120
#define BM_CLKCTRL_RESET_DIG 0x00000001
#define BP_CLKCTRL_RESET_DIG 0
#endif
arch/arm/mach-stmp378x/include/mach/regs-dcp.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: DCP register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_DCP_BASE (STMP3XXX_REGS_BASE + 0x28000)
#define REGS_DCP_PHYS 0x80028000
#define REGS_DCP_SIZE 0x2000
#define HW_DCP_CTRL 0x0
#define BM_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0x000000FF
#define BP_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0
#define BM_DCP_CTRL_ENABLE_CONTEXT_CACHING 0x00400000
#define BM_DCP_CTRL_GATHER_RESIDUAL_WRITES 0x00800000
#define BM_DCP_CTRL_CLKGATE 0x40000000
#define BM_DCP_CTRL_SFTRST 0x80000000
#define HW_DCP_STAT 0x10
#define BM_DCP_STAT_IRQ 0x0000000F
#define BP_DCP_STAT_IRQ 0
#define HW_DCP_CHANNELCTRL 0x20
#define BM_DCP_CHANNELCTRL_ENABLE_CHANNEL 0x000000FF
#define BP_DCP_CHANNELCTRL_ENABLE_CHANNEL 0
#define HW_DCP_CONTEXT 0x50
#define BM_DCP_PACKET1_INTERRUPT 0x00000001
#define BP_DCP_PACKET1_INTERRUPT 0
#define BM_DCP_PACKET1_DECR_SEMAPHORE 0x00000002
#define BM_DCP_PACKET1_CHAIN 0x00000004
#define BM_DCP_PACKET1_CHAIN_CONTIGUOUS 0x00000008
#define BM_DCP_PACKET1_ENABLE_CIPHER 0x00000020
#define BM_DCP_PACKET1_ENABLE_HASH 0x00000040
#define BM_DCP_PACKET1_CIPHER_ENCRYPT 0x00000100
#define BM_DCP_PACKET1_CIPHER_INIT 0x00000200
#define BM_DCP_PACKET1_OTP_KEY 0x00000400
#define BM_DCP_PACKET1_PAYLOAD_KEY 0x00000800
#define BM_DCP_PACKET1_HASH_INIT 0x00001000
#define BM_DCP_PACKET1_HASH_TERM 0x00002000
#define BM_DCP_PACKET2_CIPHER_SELECT 0x0000000F
#define BP_DCP_PACKET2_CIPHER_SELECT 0
#define BM_DCP_PACKET2_CIPHER_MODE 0x000000F0
#define BP_DCP_PACKET2_CIPHER_MODE 4
#define BM_DCP_PACKET2_KEY_SELECT 0x0000FF00
#define BP_DCP_PACKET2_KEY_SELECT 8
#define BM_DCP_PACKET2_HASH_SELECT 0x000F0000
#define BP_DCP_PACKET2_HASH_SELECT 16
#define BM_DCP_PACKET2_CIPHER_CFG 0xFF000000
#define BP_DCP_PACKET2_CIPHER_CFG 24
#define HW_DCP_CH0CMDPTR (0x100 + 0 * 0x40)
#define HW_DCP_CH1CMDPTR (0x100 + 1 * 0x40)
#define HW_DCP_CH2CMDPTR (0x100 + 2 * 0x40)
#define HW_DCP_CH3CMDPTR (0x100 + 3 * 0x40)
#define HW_DCP_CHnCMDPTR 0x100
#define HW_DCP_CH0SEMA (0x110 + 0 * 0x40)
#define HW_DCP_CH1SEMA (0x110 + 1 * 0x40)
#define HW_DCP_CH2SEMA (0x110 + 2 * 0x40)
#define HW_DCP_CH3SEMA (0x110 + 3 * 0x40)
#define HW_DCP_CHnSEMA 0x110
#define BM_DCP_CHnSEMA_INCREMENT 0x000000FF
#define BP_DCP_CHnSEMA_INCREMENT 0
#define HW_DCP_CH0STAT (0x120 + 0 * 0x40)
#define HW_DCP_CH1STAT (0x120 + 1 * 0x40)
#define HW_DCP_CH2STAT (0x120 + 2 * 0x40)
#define HW_DCP_CH3STAT (0x120 + 3 * 0x40)
#define HW_DCP_CHnSTAT 0x120
arch/arm/mach-stmp378x/include/mach/regs-digctl.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: DIGCTL register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_DIGCTL_BASE (STMP3XXX_REGS_BASE + 0x1C000)
#define REGS_DIGCTL_PHYS 0x8001C000
#define REGS_DIGCTL_SIZE 0x2000
#define HW_DIGCTL_CTRL 0x0
#define BM_DIGCTL_CTRL_USB_CLKGATE 0x00000004
#define HW_DIGCTL_ARMCACHE 0x2B0
#define BM_DIGCTL_ARMCACHE_ITAG_SS 0x00000003
#define BP_DIGCTL_ARMCACHE_ITAG_SS 0
#define BM_DIGCTL_ARMCACHE_DTAG_SS 0x00000030
#define BP_DIGCTL_ARMCACHE_DTAG_SS 4
#define BM_DIGCTL_ARMCACHE_CACHE_SS 0x00000300
#define BP_DIGCTL_ARMCACHE_CACHE_SS 8
#define BM_DIGCTL_ARMCACHE_DRTY_SS 0x00003000
#define BP_DIGCTL_ARMCACHE_DRTY_SS 12
#define BM_DIGCTL_ARMCACHE_VALID_SS 0x00030000
#define BP_DIGCTL_ARMCACHE_VALID_SS 16
arch/arm/mach-stmp378x/include/mach/regs-dram.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: DRAM register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_DRAM_BASE (STMP3XXX_REGS_BASE + 0xE0000)
#define REGS_DRAM_PHYS 0x800E0000
#define REGS_DRAM_SIZE 0x2000
#define HW_DRAM_CTL06 0x18
#define HW_DRAM_CTL08 0x20
arch/arm/mach-stmp378x/include/mach/regs-dri.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: DRI register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_DRI_BASE (STMP3XXX_REGS_BASE + 0x74000)
#define REGS_DRI_PHYS 0x80074000
#define REGS_DRI_SIZE 0x2000
#define HW_DRI_CTRL 0x0
#define BM_DRI_CTRL_RUN 0x00000001
#define BP_DRI_CTRL_RUN 0
#define BM_DRI_CTRL_ATTENTION_IRQ 0x00000002
#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ 0x00000004
#define BM_DRI_CTRL_OVERFLOW_IRQ 0x00000008
#define BM_DRI_CTRL_ATTENTION_IRQ_EN 0x00000200
#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ_EN 0x00000400
#define BM_DRI_CTRL_OVERFLOW_IRQ_EN 0x00000800
#define BM_DRI_CTRL_REACQUIRE_PHASE 0x00008000
#define BM_DRI_CTRL_STOP_ON_PILOT_ERROR 0x02000000
#define BM_DRI_CTRL_STOP_ON_OFLOW_ERROR 0x04000000
#define BM_DRI_CTRL_ENABLE_INPUTS 0x20000000
#define BM_DRI_CTRL_CLKGATE 0x40000000
#define BM_DRI_CTRL_SFTRST 0x80000000
#define HW_DRI_TIMING 0x10
#define BM_DRI_TIMING_GAP_DETECTION_INTERVAL 0x000000FF
#define BP_DRI_TIMING_GAP_DETECTION_INTERVAL 0
#define BM_DRI_TIMING_PILOT_REP_RATE 0x000F0000
#define BP_DRI_TIMING_PILOT_REP_RATE 16
arch/arm/mach-stmp378x/include/mach/regs-ecc8.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: ECC8 register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_ECC8_BASE (STMP3XXX_REGS_BASE + 0x8000)
#define REGS_ECC8_PHYS 0x80008000
#define REGS_ECC8_SIZE 0x2000
#define HW_ECC8_CTRL 0x0
#define BM_ECC8_CTRL_COMPLETE_IRQ 0x00000001
#define BP_ECC8_CTRL_COMPLETE_IRQ 0
#define BM_ECC8_CTRL_COMPLETE_IRQ_EN 0x00000100
#define BM_ECC8_CTRL_AHBM_SFTRST 0x20000000
#define HW_ECC8_STATUS0 0x10
#define BM_ECC8_STATUS0_UNCORRECTABLE 0x00000004
#define BM_ECC8_STATUS0_CORRECTED 0x00000008
#define BM_ECC8_STATUS0_STATUS_AUX 0x00000F00
#define BP_ECC8_STATUS0_STATUS_AUX 8
#define BM_ECC8_STATUS0_COMPLETED_CE 0x000F0000
#define BP_ECC8_STATUS0_COMPLETED_CE 16
#define HW_ECC8_STATUS1 0x20
arch/arm/mach-stmp378x/include/mach/regs-emi.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: EMI register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_EMI_BASE (STMP3XXX_REGS_BASE + 0x20000)
#define REGS_EMI_PHYS 0x80020000
#define REGS_EMI_SIZE 0x2000
#define HW_EMI_STAT 0x10
arch/arm/mach-stmp378x/include/mach/regs-gpmi.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: GPMI register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_GPMI_BASE (STMP3XXX_REGS_BASE + 0xC000)
#define REGS_GPMI_PHYS 0x8000C000
#define REGS_GPMI_SIZE 0x2000
#define HW_GPMI_CTRL0 0x0
#define BM_GPMI_CTRL0_XFER_COUNT 0x0000FFFF
#define BP_GPMI_CTRL0_XFER_COUNT 0
#define BM_GPMI_CTRL0_CS 0x00300000
#define BP_GPMI_CTRL0_CS 20
#define BM_GPMI_CTRL0_LOCK_CS 0x00400000
#define BM_GPMI_CTRL0_WORD_LENGTH 0x00800000
#define BM_GPMI_CTRL0_ADDRESS 0x000E0000
#define BP_GPMI_CTRL0_ADDRESS 17
#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0
#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1
#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2
#define BM_GPMI_CTRL0_ADDRESS_INCREMENT 0x00010000
#define BM_GPMI_CTRL0_COMMAND_MODE 0x03000000
#define BP_GPMI_CTRL0_COMMAND_MODE 24
#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
#define BM_GPMI_CTRL0_RUN 0x20000000
#define BM_GPMI_CTRL0_CLKGATE 0x40000000
#define BM_GPMI_CTRL0_SFTRST 0x80000000
#define BM_GPMI_ECCCTRL_BUFFER_MASK 0x000001FF
#define BP_GPMI_ECCCTRL_BUFFER_MASK 0
#define BM_GPMI_ECCCTRL_ENABLE_ECC 0x00001000
#define BM_GPMI_ECCCTRL_ECC_CMD 0x00006000
#define BP_GPMI_ECCCTRL_ECC_CMD 13
#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT 0
#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT 1
#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT 2
#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT 3
#define HW_GPMI_CTRL1 0x60
#define BM_GPMI_CTRL1_GPMI_MODE 0x00000001
#define BP_GPMI_CTRL1_GPMI_MODE 0
#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004
#define BM_GPMI_CTRL1_DEV_RESET 0x00000008
#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200
#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400
#define BM_GPMI_CTRL1_RDN_DELAY 0x0000F000
#define BP_GPMI_CTRL1_RDN_DELAY 12
#define BM_GPMI_CTRL1_BCH_MODE 0x00040000
#define HW_GPMI_TIMING0 0x70
#define BM_GPMI_TIMING0_DATA_SETUP 0x000000FF
#define BP_GPMI_TIMING0_DATA_SETUP 0
#define BM_GPMI_TIMING0_DATA_HOLD 0x0000FF00
#define BP_GPMI_TIMING0_DATA_HOLD 8
#define BM_GPMI_TIMING0_ADDRESS_SETUP 0x00FF0000
#define BP_GPMI_TIMING0_ADDRESS_SETUP 16
#define HW_GPMI_TIMING1 0x80
#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000
#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 16
arch/arm/mach-stmp378x/include/mach/regs-i2c.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: I2C register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_I2C_BASE (STMP3XXX_REGS_BASE + 0x58000)
#define REGS_I2C_PHYS 0x80058000
#define REGS_I2C_SIZE 0x2000
#define HW_I2C_CTRL0 0x0
#define BM_I2C_CTRL0_XFER_COUNT 0x0000FFFF
#define BP_I2C_CTRL0_XFER_COUNT 0
#define BM_I2C_CTRL0_DIRECTION 0x00010000
#define BM_I2C_CTRL0_MASTER_MODE 0x00020000
#define BM_I2C_CTRL0_PRE_SEND_START 0x00080000
#define BM_I2C_CTRL0_POST_SEND_STOP 0x00100000
#define BM_I2C_CTRL0_RETAIN_CLOCK 0x00200000
#define BM_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000
#define BM_I2C_CTRL0_CLKGATE 0x40000000
#define BM_I2C_CTRL0_SFTRST 0x80000000
#define HW_I2C_TIMING0 0x10
#define HW_I2C_TIMING1 0x20
#define HW_I2C_TIMING2 0x30
#define HW_I2C_CTRL1 0x40
#define BM_I2C_CTRL1_SLAVE_IRQ 0x00000001
#define BP_I2C_CTRL1_SLAVE_IRQ 0
#define BM_I2C_CTRL1_SLAVE_STOP_IRQ 0x00000002
#define BM_I2C_CTRL1_MASTER_LOSS_IRQ 0x00000004
#define BM_I2C_CTRL1_EARLY_TERM_IRQ 0x00000008
#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x00000010
#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x00000020
#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x00000040
#define BM_I2C_CTRL1_BUS_FREE_IRQ 0x00000080
#define BM_I2C_CTRL1_CLR_GOT_A_NAK 0x10000000
#define HW_I2C_VERSION 0x90
arch/arm/mach-stmp378x/include/mach/regs-icoll.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: ICOLL register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _MACH_REGS_ICOLL
#define _MACH_REGS_ICOLL
#define REGS_ICOLL_BASE (STMP3XXX_REGS_BASE + 0x0)
#define REGS_ICOLL_PHYS 0x80000000
#define REGS_ICOLL_SIZE 0x2000
#define HW_ICOLL_VECTOR 0x0
#define HW_ICOLL_LEVELACK 0x10
#define BM_ICOLL_LEVELACK_IRQLEVELACK 0x0000000F
#define BP_ICOLL_LEVELACK_IRQLEVELACK 0
#define HW_ICOLL_CTRL 0x20
#define BM_ICOLL_CTRL_CLKGATE 0x40000000
#define BM_ICOLL_CTRL_SFTRST 0x80000000
#define HW_ICOLL_STAT 0x70
#define HW_ICOLL_INTERRUPTn 0x120
#define HW_ICOLL_INTERRUPTn 0x120
#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004
#endif
arch/arm/mach-stmp378x/include/mach/regs-ir.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: IR register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_IR_BASE (STMP3XXX_REGS_BASE + 0x78000)
#define REGS_IR_PHYS 0x80078000
#define REGS_IR_SIZE 0x2000
arch/arm/mach-stmp378x/include/mach/regs-lcdif.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: LCDIF register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_LCDIF_BASE (STMP3XXX_REGS_BASE + 0x30000)
#define REGS_LCDIF_PHYS 0x80030000
#define REGS_LCDIF_SIZE 0x2000
#define HW_LCDIF_CTRL 0x0
#define BM_LCDIF_CTRL_RUN 0x00000001
#define BP_LCDIF_CTRL_RUN 0
#define BM_LCDIF_CTRL_LCDIF_MASTER 0x00000020
#define BM_LCDIF_CTRL_RGB_TO_YCBCR422_CSC 0x00000080
#define BM_LCDIF_CTRL_WORD_LENGTH 0x00000300
#define BP_LCDIF_CTRL_WORD_LENGTH 8
#define BM_LCDIF_CTRL_LCD_DATABUS_WIDTH 0x00000C00
#define BP_LCDIF_CTRL_LCD_DATABUS_WIDTH 10
#define BM_LCDIF_CTRL_INPUT_DATA_SWIZZLE 0x0000C000
#define BP_LCDIF_CTRL_INPUT_DATA_SWIZZLE 14
#define BM_LCDIF_CTRL_DATA_SELECT 0x00010000
#define BM_LCDIF_CTRL_DOTCLK_MODE 0x00020000
#define BM_LCDIF_CTRL_VSYNC_MODE 0x00040000
#define BM_LCDIF_CTRL_BYPASS_COUNT 0x00080000
#define BM_LCDIF_CTRL_DVI_MODE 0x00100000
#define BM_LCDIF_CTRL_SHIFT_NUM_BITS 0x03E00000
#define BP_LCDIF_CTRL_SHIFT_NUM_BITS 21
#define BM_LCDIF_CTRL_DATA_SHIFT_DIR 0x04000000
#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE 0x08000000
#define BM_LCDIF_CTRL_CLKGATE 0x40000000
#define BM_LCDIF_CTRL_SFTRST 0x80000000
#define HW_LCDIF_CTRL1 0x10
#define BM_LCDIF_CTRL1_RESET 0x00000001
#define BP_LCDIF_CTRL1_RESET 0
#define BM_LCDIF_CTRL1_MODE86 0x00000002
#define BM_LCDIF_CTRL1_BUSY_ENABLE 0x00000004
#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ 0x00000100
#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ 0x00000200
#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ 0x00000400
#define BM_LCDIF_CTRL1_OVERFLOW_IRQ 0x00000800
#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN 0x00001000
#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT 0x000F0000
#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT 16
#define BM_LCDIF_CTRL1_INTERLACE_FIELDS 0x00800000
#define BM_LCDIF_CTRL1_RECOVER_ON_UNDERFLOW 0x01000000
#define HW_LCDIF_TRANSFER_COUNT 0x20
#define BM_LCDIF_TRANSFER_COUNT_H_COUNT 0x0000FFFF
#define BP_LCDIF_TRANSFER_COUNT_H_COUNT 0
#define BM_LCDIF_TRANSFER_COUNT_V_COUNT 0xFFFF0000
#define BP_LCDIF_TRANSFER_COUNT_V_COUNT 16
#define HW_LCDIF_CUR_BUF 0x30
#define HW_LCDIF_NEXT_BUF 0x40
#define HW_LCDIF_TIMING 0x60
#define HW_LCDIF_VDCTRL0 0x70
#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0x0003FFFF
#define BP_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0
#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT 0x00100000
#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT 0x00200000
#define BM_LCDIF_VDCTRL0_ENABLE_POL 0x01000000
#define BM_LCDIF_VDCTRL0_DOTCLK_POL 0x02000000
#define BM_LCDIF_VDCTRL0_HSYNC_POL 0x04000000
#define BM_LCDIF_VDCTRL0_VSYNC_POL 0x08000000
#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT 0x10000000
#define BM_LCDIF_VDCTRL0_VSYNC_OEB 0x20000000
#define HW_LCDIF_VDCTRL1 0x80
#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD 0xFFFFFFFF
#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD 0
#define HW_LCDIF_VDCTRL2 0x90
#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD 0x0003FFFF
#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD 0
#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 0xFF000000
#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 24
#define HW_LCDIF_VDCTRL3 0xA0
#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0x0000FFFF
#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0
#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 0x0FFF0000
#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 16
#define HW_LCDIF_VDCTRL4 0xB0
#define BM_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0x0003FFFF
#define BP_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0
#define BM_LCDIF_VDCTRL4_SYNC_SIGNALS_ON 0x00040000
#define HW_LCDIF_DVICTRL0 0xC0
#define BM_LCDIF_DVICTRL0_V_LINES_CNT 0x000003FF
#define BP_LCDIF_DVICTRL0_V_LINES_CNT 0
#define BM_LCDIF_DVICTRL0_H_BLANKING_CNT 0x000FFC00
#define BP_LCDIF_DVICTRL0_H_BLANKING_CNT 10
#define BM_LCDIF_DVICTRL0_H_ACTIVE_CNT 0x7FF00000
#define BP_LCDIF_DVICTRL0_H_ACTIVE_CNT 20
#define HW_LCDIF_DVICTRL1 0xD0
#define BM_LCDIF_DVICTRL1_F2_START_LINE 0x000003FF
#define BP_LCDIF_DVICTRL1_F2_START_LINE 0
#define BM_LCDIF_DVICTRL1_F1_END_LINE 0x000FFC00
#define BP_LCDIF_DVICTRL1_F1_END_LINE 10
#define BM_LCDIF_DVICTRL1_F1_START_LINE 0x3FF00000
#define BP_LCDIF_DVICTRL1_F1_START_LINE 20
#define HW_LCDIF_DVICTRL2 0xE0
#define BM_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0x000003FF
#define BP_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0
#define BM_LCDIF_DVICTRL2_V1_BLANK_START_LINE 0x000FFC00
#define BP_LCDIF_DVICTRL2_V1_BLANK_START_LINE 10
#define BM_LCDIF_DVICTRL2_F2_END_LINE 0x3FF00000
#define BP_LCDIF_DVICTRL2_F2_END_LINE 20
#define HW_LCDIF_DVICTRL3 0xF0
#define BM_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0x000003FF
#define BP_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0
#define BM_LCDIF_DVICTRL3_V2_BLANK_START_LINE 0x03FF0000
#define BP_LCDIF_DVICTRL3_V2_BLANK_START_LINE 16
#define HW_LCDIF_DVICTRL4 0x100
#define BM_LCDIF_DVICTRL4_H_FILL_CNT 0x000000FF
#define BP_LCDIF_DVICTRL4_H_FILL_CNT 0
#define BM_LCDIF_DVICTRL4_CR_FILL_VALUE 0x0000FF00
#define BP_LCDIF_DVICTRL4_CR_FILL_VALUE 8
#define BM_LCDIF_DVICTRL4_CB_FILL_VALUE 0x00FF0000
#define BP_LCDIF_DVICTRL4_CB_FILL_VALUE 16
#define BM_LCDIF_DVICTRL4_Y_FILL_VALUE 0xFF000000
#define BP_LCDIF_DVICTRL4_Y_FILL_VALUE 24
#define HW_LCDIF_CSC_COEFF0 0x110
#define BM_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0x00000003
#define BP_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0
#define BM_LCDIF_CSC_COEFF0_C0 0x03FF0000
#define BP_LCDIF_CSC_COEFF0_C0 16
#define HW_LCDIF_CSC_COEFF1 0x120
#define BM_LCDIF_CSC_COEFF1_C1 0x000003FF
#define BP_LCDIF_CSC_COEFF1_C1 0
#define BM_LCDIF_CSC_COEFF1_C2 0x03FF0000
#define BP_LCDIF_CSC_COEFF1_C2 16
#define HW_LCDIF_CSC_COEFF2 0x130
#define BM_LCDIF_CSC_COEFF2_C3 0x000003FF
#define BP_LCDIF_CSC_COEFF2_C3 0
#define BM_LCDIF_CSC_COEFF2_C4 0x03FF0000
#define BP_LCDIF_CSC_COEFF2_C4 16
#define HW_LCDIF_CSC_COEFF3 0x140
#define BM_LCDIF_CSC_COEFF3_C5 0x000003FF
#define BP_LCDIF_CSC_COEFF3_C5 0
#define BM_LCDIF_CSC_COEFF3_C6 0x03FF0000
#define BP_LCDIF_CSC_COEFF3_C6 16
#define HW_LCDIF_CSC_COEFF4 0x150
#define BM_LCDIF_CSC_COEFF4_C7 0x000003FF
#define BP_LCDIF_CSC_COEFF4_C7 0
#define BM_LCDIF_CSC_COEFF4_C8 0x03FF0000
#define BP_LCDIF_CSC_COEFF4_C8 16
#define HW_LCDIF_CSC_OFFSET 0x160
#define BM_LCDIF_CSC_OFFSET_Y_OFFSET 0x000001FF
#define BP_LCDIF_CSC_OFFSET_Y_OFFSET 0
#define BM_LCDIF_CSC_OFFSET_CBCR_OFFSET 0x01FF0000
#define BP_LCDIF_CSC_OFFSET_CBCR_OFFSET 16
#define HW_LCDIF_CSC_LIMIT 0x170
#define BM_LCDIF_CSC_LIMIT_Y_MAX 0x000000FF
#define BP_LCDIF_CSC_LIMIT_Y_MAX 0
#define BM_LCDIF_CSC_LIMIT_Y_MIN 0x0000FF00
#define BP_LCDIF_CSC_LIMIT_Y_MIN 8
#define BM_LCDIF_CSC_LIMIT_CBCR_MAX 0x00FF0000
#define BP_LCDIF_CSC_LIMIT_CBCR_MAX 16
#define BM_LCDIF_CSC_LIMIT_CBCR_MIN 0xFF000000
#define BP_LCDIF_CSC_LIMIT_CBCR_MIN 24
#define HW_LCDIF_STAT 0x1D0
#define BM_LCDIF_STAT_TXFIFO_EMPTY 0x04000000
arch/arm/mach-stmp378x/include/mach/regs-lradc.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: LRADC register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_LRADC_BASE (STMP3XXX_REGS_BASE + 0x50000)
#define REGS_LRADC_PHYS 0x80050000
#define REGS_LRADC_SIZE 0x2000
#define HW_LRADC_CTRL0 0x0
#define BM_LRADC_CTRL0_SCHEDULE 0x000000FF
#define BP_LRADC_CTRL0_SCHEDULE 0
#define BM_LRADC_CTRL0_XPLUS_ENABLE 0x00010000
#define BM_LRADC_CTRL0_YPLUS_ENABLE 0x00020000
#define BM_LRADC_CTRL0_XMINUS_ENABLE 0x00040000
#define BM_LRADC_CTRL0_YMINUS_ENABLE 0x00080000
#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE 0x00100000
#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF 0x00200000
#define BM_LRADC_CTRL0_CLKGATE 0x40000000
#define BM_LRADC_CTRL0_SFTRST 0x80000000
#define HW_LRADC_CTRL1 0x10
#define BM_LRADC_CTRL1_LRADC0_IRQ 0x00000001
#define BP_LRADC_CTRL1_LRADC0_IRQ 0
#define BM_LRADC_CTRL1_LRADC5_IRQ 0x00000020
#define BM_LRADC_CTRL1_LRADC6_IRQ 0x00000040
#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ 0x00000100
#define BM_LRADC_CTRL1_LRADC0_IRQ_EN 0x00010000
#define BM_LRADC_CTRL1_LRADC5_IRQ_EN 0x00200000
#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN 0x01000000
#define HW_LRADC_CTRL2 0x20
#define BM_LRADC_CTRL2_BL_BRIGHTNESS 0x001F0000
#define BP_LRADC_CTRL2_BL_BRIGHTNESS 16
#define BM_LRADC_CTRL2_BL_MUX_SELECT 0x00200000
#define BM_LRADC_CTRL2_BL_ENABLE 0x00400000
#define BM_LRADC_CTRL2_DIVIDE_BY_TWO 0xFF000000
#define BP_LRADC_CTRL2_DIVIDE_BY_TWO 24
#define HW_LRADC_CTRL3 0x30
#define BM_LRADC_CTRL3_CYCLE_TIME 0x00000300
#define BP_LRADC_CTRL3_CYCLE_TIME 8
#define HW_LRADC_STATUS 0x40
#define BM_LRADC_STATUS_TOUCH_DETECT_RAW 0x00000001
#define BP_LRADC_STATUS_TOUCH_DETECT_RAW 0
#define HW_LRADC_CH0 (0x50 + 0 * 0x10)
#define HW_LRADC_CH1 (0x50 + 1 * 0x10)
#define HW_LRADC_CH2 (0x50 + 2 * 0x10)
#define HW_LRADC_CH3 (0x50 + 3 * 0x10)
#define HW_LRADC_CH4 (0x50 + 4 * 0x10)
#define HW_LRADC_CH5 (0x50 + 5 * 0x10)
#define HW_LRADC_CH6 (0x50 + 6 * 0x10)
#define HW_LRADC_CH7 (0x50 + 7 * 0x10)
#define HW_LRADC_CHn 0x50
#define BM_LRADC_CHn_VALUE 0x0003FFFF
#define BP_LRADC_CHn_VALUE 0
#define BM_LRADC_CHn_NUM_SAMPLES 0x1F000000
#define BP_LRADC_CHn_NUM_SAMPLES 24
#define BM_LRADC_CHn_ACCUMULATE 0x20000000
#define HW_LRADC_DELAY0 (0xD0 + 0 * 0x10)
#define HW_LRADC_DELAY1 (0xD0 + 1 * 0x10)
#define HW_LRADC_DELAY2 (0xD0 + 2 * 0x10)
#define HW_LRADC_DELAY3 (0xD0 + 3 * 0x10)
#define HW_LRADC_DELAYn 0xD0
#define BM_LRADC_DELAYn_DELAY 0x000007FF
#define BP_LRADC_DELAYn_DELAY 0
#define BM_LRADC_DELAYn_LOOP_COUNT 0x0000F800
#define BP_LRADC_DELAYn_LOOP_COUNT 11
#define BM_LRADC_DELAYn_TRIGGER_DELAYS 0x000F0000
#define BP_LRADC_DELAYn_TRIGGER_DELAYS 16
#define BM_LRADC_DELAYn_KICK 0x00100000
#define BM_LRADC_DELAYn_TRIGGER_LRADCS 0xFF000000
#define BP_LRADC_DELAYn_TRIGGER_LRADCS 24
#define HW_LRADC_CTRL4 0x140
#define BM_LRADC_CTRL4_LRADC6SELECT 0x0F000000
#define BP_LRADC_CTRL4_LRADC6SELECT 24
#define BM_LRADC_CTRL4_LRADC7SELECT 0xF0000000
#define BP_LRADC_CTRL4_LRADC7SELECT 28
arch/arm/mach-stmp378x/include/mach/regs-ocotp.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: OCOTP register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_OCOTP_BASE (STMP3XXX_REGS_BASE + 0x2C000)
#define REGS_OCOTP_PHYS 0x8002C000
#define REGS_OCOTP_SIZE 0x2000
#define HW_OCOTP_CTRL 0x0
#define BM_OCOTP_CTRL_BUSY 0x00000100
#define BM_OCOTP_CTRL_ERROR 0x00000200
#define BM_OCOTP_CTRL_RD_BANK_OPEN 0x00001000
#define BM_OCOTP_CTRL_RELOAD_SHADOWS 0x00002000
#define BM_OCOTP_CTRL_WR_UNLOCK 0xFFFF0000
#define BP_OCOTP_CTRL_WR_UNLOCK 16
#define HW_OCOTP_DATA 0x10
#define HW_OCOTP_CUST0 (0x20 + 0 * 0x10)
#define HW_OCOTP_CUST1 (0x20 + 1 * 0x10)
#define HW_OCOTP_CUST2 (0x20 + 2 * 0x10)
#define HW_OCOTP_CUST3 (0x20 + 3 * 0x10)
#define HW_OCOTP_CUSTn 0x20
arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: PINCTRL register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _MACH_REGS_PINCTRL
#define _MACH_REGS_PINCTRL
#define REGS_PINCTRL_BASE (STMP3XXX_REGS_BASE + 0x18000)
#define REGS_PINCTRL_PHYS 0x80018000
#define REGS_PINCTRL_SIZE 0x2000
#define HW_PINCTRL_MUXSEL0 0x100
#define HW_PINCTRL_MUXSEL1 0x110
#define HW_PINCTRL_MUXSEL2 0x120
#define HW_PINCTRL_MUXSEL3 0x130
#define HW_PINCTRL_MUXSEL4 0x140
#define HW_PINCTRL_MUXSEL5 0x150
#define HW_PINCTRL_MUXSEL6 0x160
#define HW_PINCTRL_MUXSEL7 0x170
#define HW_PINCTRL_DRIVE0 0x200
#define HW_PINCTRL_DRIVE1 0x210
#define HW_PINCTRL_DRIVE2 0x220
#define HW_PINCTRL_DRIVE3 0x230
#define HW_PINCTRL_DRIVE4 0x240
#define HW_PINCTRL_DRIVE5 0x250
#define HW_PINCTRL_DRIVE6 0x260
#define HW_PINCTRL_DRIVE7 0x270
#define HW_PINCTRL_DRIVE8 0x280
#define HW_PINCTRL_DRIVE9 0x290
#define HW_PINCTRL_DRIVE10 0x2A0
#define HW_PINCTRL_DRIVE11 0x2B0
#define HW_PINCTRL_DRIVE12 0x2C0
#define HW_PINCTRL_DRIVE13 0x2D0
#define HW_PINCTRL_DRIVE14 0x2E0
#define HW_PINCTRL_PULL0 0x400
#define HW_PINCTRL_PULL1 0x410
#define HW_PINCTRL_PULL2 0x420
#define HW_PINCTRL_PULL3 0x430
#define HW_PINCTRL_DOUT0 0x500
#define HW_PINCTRL_DOUT1 0x510
#define HW_PINCTRL_DOUT2 0x520
#define HW_PINCTRL_DIN0 0x600
#define HW_PINCTRL_DIN1 0x610
#define HW_PINCTRL_DIN2 0x620
#define HW_PINCTRL_DOE0 0x700
#define HW_PINCTRL_DOE1 0x710
#define HW_PINCTRL_DOE2 0x720
#define HW_PINCTRL_PIN2IRQ0 0x800
#define HW_PINCTRL_PIN2IRQ1 0x810
#define HW_PINCTRL_PIN2IRQ2 0x820
#define HW_PINCTRL_IRQEN0 0x900
#define HW_PINCTRL_IRQEN1 0x910
#define HW_PINCTRL_IRQEN2 0x920
#define HW_PINCTRL_IRQLEVEL0 0xA00
#define HW_PINCTRL_IRQLEVEL1 0xA10
#define HW_PINCTRL_IRQLEVEL2 0xA20
#define HW_PINCTRL_IRQPOL0 0xB00
#define HW_PINCTRL_IRQPOL1 0xB10
#define HW_PINCTRL_IRQPOL2 0xB20
#define HW_PINCTRL_IRQSTAT0 0xC00
#define HW_PINCTRL_IRQSTAT1 0xC10
#define HW_PINCTRL_IRQSTAT2 0xC20
#endif
arch/arm/mach-stmp378x/include/mach/regs-power.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: POWER register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _MACH_REGS_POWER
#define _MACH_REGS_POWER
#define REGS_POWER_BASE (STMP3XXX_REGS_BASE + 0x44000)
#define REGS_POWER_PHYS 0x80044000
#define REGS_POWER_SIZE 0x2000
#define HW_POWER_CTRL 0x0
#define BM_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0x00000001
#define BP_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0
#define BM_POWER_CTRL_ENIRQ_PSWITCH 0x00020000
#define BM_POWER_CTRL_PSWITCH_IRQ 0x00100000
#define BM_POWER_CTRL_CLKGATE 0x40000000
#define HW_POWER_5VCTRL 0x10
#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT 0x00000040
#define HW_POWER_MINPWR 0x20
#define HW_POWER_CHARGE 0x30
#define HW_POWER_VDDDCTRL 0x40
#define HW_POWER_VDDACTRL 0x50
#define HW_POWER_VDDIOCTRL 0x60
#define BM_POWER_VDDIOCTRL_TRG 0x0000001F
#define BP_POWER_VDDIOCTRL_TRG 0
#define HW_POWER_STS 0xC0
#define BM_POWER_STS_VBUSVALID 0x00000002
#define BM_POWER_STS_BVALID 0x00000004
#define BM_POWER_STS_AVALID 0x00000008
#define BM_POWER_STS_DC_OK 0x00000200
#define HW_POWER_RESET 0x100
#define HW_POWER_DEBUG 0x110
#define BM_POWER_DEBUG_BVALIDPIOLOCK 0x00000002
#define BM_POWER_DEBUG_AVALIDPIOLOCK 0x00000004
#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK 0x00000008
#endif
arch/arm/mach-stmp378x/include/mach/regs-pwm.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: PWM register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_PWM_BASE (STMP3XXX_REGS_BASE + 0x64000)
#define REGS_PWM_PHYS 0x80064000
#define REGS_PWM_SIZE 0x2000
#define HW_PWM_CTRL 0x0
#define BM_PWM_CTRL_PWM2_ENABLE 0x00000004
#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE 0x00000020
#define HW_PWM_ACTIVE0 (0x10 + 0 * 0x20)
#define HW_PWM_ACTIVE1 (0x10 + 1 * 0x20)
#define HW_PWM_ACTIVE2 (0x10 + 2 * 0x20)
#define HW_PWM_ACTIVE3 (0x10 + 3 * 0x20)
#define HW_PWM_ACTIVEn 0x10
#define BM_PWM_ACTIVEn_ACTIVE 0x0000FFFF
#define BP_PWM_ACTIVEn_ACTIVE 0
#define BM_PWM_ACTIVEn_INACTIVE 0xFFFF0000
#define BP_PWM_ACTIVEn_INACTIVE 16
#define HW_PWM_PERIOD0 (0x20 + 0 * 0x20)
#define HW_PWM_PERIOD1 (0x20 + 1 * 0x20)
#define HW_PWM_PERIOD2 (0x20 + 2 * 0x20)
#define HW_PWM_PERIOD3 (0x20 + 3 * 0x20)
#define HW_PWM_PERIODn 0x20
#define BM_PWM_PERIODn_PERIOD 0x0000FFFF
#define BP_PWM_PERIODn_PERIOD 0
#define BM_PWM_PERIODn_ACTIVE_STATE 0x00030000
#define BP_PWM_PERIODn_ACTIVE_STATE 16
#define BM_PWM_PERIODn_INACTIVE_STATE 0x000C0000
#define BP_PWM_PERIODn_INACTIVE_STATE 18
#define BM_PWM_PERIODn_CDIV 0x00700000
#define BP_PWM_PERIODn_CDIV 20
arch/arm/mach-stmp378x/include/mach/regs-pxp.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: PXP register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_PXP_BASE (STMP3XXX_REGS_BASE + 0x2A000)
#define REGS_PXP_PHYS 0x8002A000
#define REGS_PXP_SIZE 0x2000
#define HW_PXP_CTRL 0x0
#define BM_PXP_CTRL_ENABLE 0x00000001
#define BP_PXP_CTRL_ENABLE 0
#define BM_PXP_CTRL_IRQ_ENABLE 0x00000002
#define BM_PXP_CTRL_OUTPUT_RGB_FORMAT 0x000000F0
#define BP_PXP_CTRL_OUTPUT_RGB_FORMAT 4
#define BM_PXP_CTRL_ROTATE 0x00000300
#define BP_PXP_CTRL_ROTATE 8
#define BM_PXP_CTRL_HFLIP 0x00000400
#define BM_PXP_CTRL_VFLIP 0x00000800
#define BM_PXP_CTRL_S0_FORMAT 0x0000F000
#define BP_PXP_CTRL_S0_FORMAT 12
#define BM_PXP_CTRL_SCALE 0x00040000
#define BM_PXP_CTRL_CROP 0x00080000
#define HW_PXP_STAT 0x10
#define BM_PXP_STAT_IRQ 0x00000001
#define BP_PXP_STAT_IRQ 0
#define HW_PXP_RGBBUF 0x20
#define HW_PXP_RGBSIZE 0x40
#define BM_PXP_RGBSIZE_HEIGHT 0x00000FFF
#define BP_PXP_RGBSIZE_HEIGHT 0
#define BM_PXP_RGBSIZE_WIDTH 0x00FFF000
#define BP_PXP_RGBSIZE_WIDTH 12
#define HW_PXP_S0BUF 0x50
#define HW_PXP_S0UBUF 0x60
#define HW_PXP_S0VBUF 0x70
#define HW_PXP_S0PARAM 0x80
#define BM_PXP_S0PARAM_HEIGHT 0x000000FF
#define BP_PXP_S0PARAM_HEIGHT 0
#define BM_PXP_S0PARAM_WIDTH 0x0000FF00
#define BP_PXP_S0PARAM_WIDTH 8
#define BM_PXP_S0PARAM_YBASE 0x00FF0000
#define BP_PXP_S0PARAM_YBASE 16
#define BM_PXP_S0PARAM_XBASE 0xFF000000
#define BP_PXP_S0PARAM_XBASE 24
#define HW_PXP_S0BACKGROUND 0x90
#define HW_PXP_S0CROP 0xA0
#define BM_PXP_S0CROP_HEIGHT 0x000000FF
#define BP_PXP_S0CROP_HEIGHT 0
#define BM_PXP_S0CROP_WIDTH 0x0000FF00
#define BP_PXP_S0CROP_WIDTH 8
#define BM_PXP_S0CROP_YBASE 0x00FF0000
#define BP_PXP_S0CROP_YBASE 16
#define BM_PXP_S0CROP_XBASE 0xFF000000
#define BP_PXP_S0CROP_XBASE 24
#define HW_PXP_S0SCALE 0xB0
#define BM_PXP_S0SCALE_XSCALE 0x00003FFF
#define BP_PXP_S0SCALE_XSCALE 0
#define BM_PXP_S0SCALE_YSCALE 0x3FFF0000
#define BP_PXP_S0SCALE_YSCALE 16
#define HW_PXP_CSCCOEFF0 0xD0
#define HW_PXP_CSCCOEFF1 0xE0
#define HW_PXP_CSCCOEFF2 0xF0
#define HW_PXP_S0COLORKEYLOW 0x180
#define HW_PXP_S0COLORKEYHIGH 0x190
#define HW_PXP_OL0 (0x200 + 0 * 0x40)
#define HW_PXP_OL1 (0x200 + 1 * 0x40)
#define HW_PXP_OL2 (0x200 + 2 * 0x40)
#define HW_PXP_OL3 (0x200 + 3 * 0x40)
#define HW_PXP_OL4 (0x200 + 4 * 0x40)
#define HW_PXP_OL5 (0x200 + 5 * 0x40)
#define HW_PXP_OL6 (0x200 + 6 * 0x40)
#define HW_PXP_OL7 (0x200 + 7 * 0x40)
#define HW_PXP_OLn 0x200
#define HW_PXP_OL0SIZE (0x210 + 0 * 0x40)
#define HW_PXP_OL1SIZE (0x210 + 1 * 0x40)
#define HW_PXP_OL2SIZE (0x210 + 2 * 0x40)
#define HW_PXP_OL3SIZE (0x210 + 3 * 0x40)
#define HW_PXP_OL4SIZE (0x210 + 4 * 0x40)
#define HW_PXP_OL5SIZE (0x210 + 5 * 0x40)
#define HW_PXP_OL6SIZE (0x210 + 6 * 0x40)
#define HW_PXP_OL7SIZE (0x210 + 7 * 0x40)
#define HW_PXP_OLnSIZE 0x210
#define BM_PXP_OLnSIZE_HEIGHT 0x000000FF
#define BP_PXP_OLnSIZE_HEIGHT 0
#define BM_PXP_OLnSIZE_WIDTH 0x0000FF00
#define BP_PXP_OLnSIZE_WIDTH 8
#define HW_PXP_OL0PARAM (0x220 + 0 * 0x40)
#define HW_PXP_OL1PARAM (0x220 + 1 * 0x40)
#define HW_PXP_OL2PARAM (0x220 + 2 * 0x40)
#define HW_PXP_OL3PARAM (0x220 + 3 * 0x40)
#define HW_PXP_OL4PARAM (0x220 + 4 * 0x40)
#define HW_PXP_OL5PARAM (0x220 + 5 * 0x40)
#define HW_PXP_OL6PARAM (0x220 + 6 * 0x40)
#define HW_PXP_OL7PARAM (0x220 + 7 * 0x40)
#define HW_PXP_OLnPARAM 0x220
#define BM_PXP_OLnPARAM_ENABLE 0x00000001
#define BP_PXP_OLnPARAM_ENABLE 0
#define BM_PXP_OLnPARAM_ALPHA_CNTL 0x00000006
#define BP_PXP_OLnPARAM_ALPHA_CNTL 1
#define BM_PXP_OLnPARAM_ENABLE_COLORKEY 0x00000008
#define BM_PXP_OLnPARAM_FORMAT 0x000000F0
#define BP_PXP_OLnPARAM_FORMAT 4
#define BM_PXP_OLnPARAM_ALPHA 0x0000FF00
#define BP_PXP_OLnPARAM_ALPHA 8
arch/arm/mach-stmp378x/include/mach/regs-rtc.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: RTC register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_RTC_BASE (STMP3XXX_REGS_BASE + 0x5C000)
#define REGS_RTC_PHYS 0x8005C000
#define REGS_RTC_SIZE 0x2000
#define HW_RTC_CTRL 0x0
#define BM_RTC_CTRL_ALARM_IRQ_EN 0x00000001
#define BP_RTC_CTRL_ALARM_IRQ_EN 0
#define BM_RTC_CTRL_ONEMSEC_IRQ_EN 0x00000002
#define BM_RTC_CTRL_ALARM_IRQ 0x00000004
#define BM_RTC_CTRL_ONEMSEC_IRQ 0x00000008
#define BM_RTC_CTRL_WATCHDOGEN 0x00000010
#define HW_RTC_STAT 0x10
#define BM_RTC_STAT_NEW_REGS 0x0000FF00
#define BP_RTC_STAT_NEW_REGS 8
#define BM_RTC_STAT_STALE_REGS 0x00FF0000
#define BP_RTC_STAT_STALE_REGS 16
#define BM_RTC_STAT_RTC_PRESENT 0x80000000
#define HW_RTC_SECONDS 0x30
#define HW_RTC_ALARM 0x40
#define HW_RTC_WATCHDOG 0x50
#define HW_RTC_PERSISTENT0 0x60
#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN 0x00000002
#define BM_RTC_PERSISTENT0_ALARM_EN 0x00000004
#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP 0x00000010
#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP 0x00000020
#define BM_RTC_PERSISTENT0_ALARM_WAKE 0x00000080
#define BM_RTC_PERSISTENT0_SPARE_ANALOG 0xFFFC0000
#define BP_RTC_PERSISTENT0_SPARE_ANALOG 18
#define HW_RTC_PERSISTENT1 0x70
#define BM_RTC_PERSISTENT1_GENERAL 0xFFFFFFFF
#define BP_RTC_PERSISTENT1_GENERAL 0
#define HW_RTC_VERSION 0xD0
arch/arm/mach-stmp378x/include/mach/regs-saif.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: SAIF register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_SAIF_SIZE 0x2000
arch/arm/mach-stmp378x/include/mach/regs-spdif.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: SPDIF register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_SPDIF_BASE (STMP3XXX_REGS_BASE + 0x54000)
#define REGS_SPDIF_PHYS 0x80054000
#define REGS_SPDIF_SIZE 0x2000
#define HW_SPDIF_CTRL 0x0
#define BM_SPDIF_CTRL_RUN 0x00000001
#define BP_SPDIF_CTRL_RUN 0
#define BM_SPDIF_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
#define BM_SPDIF_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
#define BM_SPDIF_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
#define BM_SPDIF_CTRL_WORD_LENGTH 0x00000010
#define BM_SPDIF_CTRL_CLKGATE 0x40000000
#define BM_SPDIF_CTRL_SFTRST 0x80000000
#define HW_SPDIF_STAT 0x10
#define HW_SPDIF_FRAMECTRL 0x20
#define HW_SPDIF_SRR 0x30
#define BM_SPDIF_SRR_RATE 0x000FFFFF
#define BP_SPDIF_SRR_RATE 0
#define BM_SPDIF_SRR_BASEMULT 0x70000000
#define BP_SPDIF_SRR_BASEMULT 28
#define HW_SPDIF_DEBUG 0x40
#define HW_SPDIF_DATA 0x50
#define HW_SPDIF_VERSION 0x60
arch/arm/mach-stmp378x/include/mach/regs-ssp.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: SSP register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_SSP1_BASE (STMP3XXX_REGS_BASE + 0x10000)
#define REGS_SSP1_PHYS 0x80010000
#define REGS_SSP2_BASE (STMP3XXX_REGS_BASE + 0x34000)
#define REGS_SSP2_PHYS 0x80034000
#define REGS_SSP_SIZE 0x2000
#define HW_SSP_CTRL0 0x0
#define BM_SSP_CTRL0_XFER_COUNT 0x0000FFFF
#define BP_SSP_CTRL0_XFER_COUNT 0
#define BM_SSP_CTRL0_ENABLE 0x00010000
#define BM_SSP_CTRL0_GET_RESP 0x00020000
#define BM_SSP_CTRL0_LONG_RESP 0x00080000
#define BM_SSP_CTRL0_WAIT_FOR_CMD 0x00100000
#define BM_SSP_CTRL0_WAIT_FOR_IRQ 0x00200000
#define BM_SSP_CTRL0_BUS_WIDTH 0x00C00000
#define BP_SSP_CTRL0_BUS_WIDTH 22
#define BM_SSP_CTRL0_DATA_XFER 0x01000000
#define BM_SSP_CTRL0_READ 0x02000000
#define BM_SSP_CTRL0_IGNORE_CRC 0x04000000
#define BM_SSP_CTRL0_LOCK_CS 0x08000000
#define BM_SSP_CTRL0_RUN 0x20000000
#define BM_SSP_CTRL0_CLKGATE 0x40000000
#define BM_SSP_CTRL0_SFTRST 0x80000000
#define HW_SSP_CMD0 0x10
#define BM_SSP_CMD0_CMD 0x000000FF
#define BP_SSP_CMD0_CMD 0
#define BM_SSP_CMD0_BLOCK_COUNT 0x0000FF00
#define BP_SSP_CMD0_BLOCK_COUNT 8
#define BM_SSP_CMD0_BLOCK_SIZE 0x000F0000
#define BP_SSP_CMD0_BLOCK_SIZE 16
#define BM_SSP_CMD0_APPEND_8CYC 0x00100000
#define BM_SSP_CMD1_CMD_ARG 0xFFFFFFFF
#define BP_SSP_CMD1_CMD_ARG 0
#define HW_SSP_TIMING 0x50
#define BM_SSP_TIMING_CLOCK_RATE 0x000000FF
#define BP_SSP_TIMING_CLOCK_RATE 0
#define BM_SSP_TIMING_CLOCK_DIVIDE 0x0000FF00
#define BP_SSP_TIMING_CLOCK_DIVIDE 8
#define BM_SSP_TIMING_TIMEOUT 0xFFFF0000
#define BP_SSP_TIMING_TIMEOUT 16
#define HW_SSP_CTRL1 0x60
#define BM_SSP_CTRL1_SSP_MODE 0x0000000F
#define BP_SSP_CTRL1_SSP_MODE 0
#define BM_SSP_CTRL1_WORD_LENGTH 0x000000F0
#define BP_SSP_CTRL1_WORD_LENGTH 4
#define BM_SSP_CTRL1_POLARITY 0x00000200
#define BM_SSP_CTRL1_PHASE 0x00000400
#define BM_SSP_CTRL1_DMA_ENABLE 0x00002000
#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ 0x00008000
#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN 0x00010000
#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ 0x00020000
#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ 0x00200000
#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN 0x00400000
#define BM_SSP_CTRL1_DATA_CRC_IRQ 0x00800000
#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN 0x01000000
#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ 0x02000000
#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN 0x04000000
#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ 0x08000000
#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN 0x10000000
#define BM_SSP_CTRL1_RESP_ERR_IRQ 0x20000000
#define BM_SSP_CTRL1_SDIO_IRQ 0x80000000
#define HW_SSP_DATA 0x70
#define HW_SSP_SDRESP0 0x80
#define HW_SSP_SDRESP1 0x90
#define HW_SSP_SDRESP2 0xA0
#define HW_SSP_SDRESP3 0xB0
#define HW_SSP_STATUS 0xC0
#define BM_SSP_STATUS_FIFO_EMPTY 0x00000020
#define BM_SSP_STATUS_TIMEOUT 0x00001000
#define BM_SSP_STATUS_RESP_TIMEOUT 0x00004000
#define BM_SSP_STATUS_RESP_ERR 0x00008000
#define BM_SSP_STATUS_RESP_CRC_ERR 0x00010000
#define BM_SSP_STATUS_CARD_DETECT 0x10000000
arch/arm/mach-stmp378x/include/mach/regs-sydma.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: SYDMA register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_SYDMA_BASE (STMP3XXX_REGS_BASE + 0x26000)
#define REGS_SYDMA_PHYS 0x80026000
#define REGS_SYDMA_SIZE 0x2000
arch/arm/mach-stmp378x/include/mach/regs-timrot.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: TIMROT register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _MACH_REGS_TIMROT
#define _MACH_REGS_TIMROT
#define REGS_TIMROT_BASE (STMP3XXX_REGS_BASE + 0x68000)
#define REGS_TIMROT_PHYS 0x80068000
#define REGS_TIMROT_SIZE 0x2000
#define HW_TIMROT_ROTCTRL 0x0
#define BM_TIMROT_ROTCTRL_SELECT_A 0x00000007
#define BP_TIMROT_ROTCTRL_SELECT_A 0
#define BM_TIMROT_ROTCTRL_SELECT_B 0x00000070
#define BP_TIMROT_ROTCTRL_SELECT_B 4
#define BM_TIMROT_ROTCTRL_POLARITY_A 0x00000100
#define BM_TIMROT_ROTCTRL_POLARITY_B 0x00000200
#define BM_TIMROT_ROTCTRL_OVERSAMPLE 0x00000C00
#define BP_TIMROT_ROTCTRL_OVERSAMPLE 10
#define BM_TIMROT_ROTCTRL_RELATIVE 0x00001000
#define BM_TIMROT_ROTCTRL_DIVIDER 0x003F0000
#define BP_TIMROT_ROTCTRL_DIVIDER 16
#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT 0x20000000
#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000
#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000
#define HW_TIMROT_ROTCOUNT 0x10
#define BM_TIMROT_ROTCOUNT_UPDOWN 0x0000FFFF
#define BP_TIMROT_ROTCOUNT_UPDOWN 0
#define HW_TIMROT_TIMCTRL0 (0x20 + 0 * 0x20)
#define HW_TIMROT_TIMCTRL1 (0x20 + 1 * 0x20)
#define HW_TIMROT_TIMCTRL2 (0x20 + 2 * 0x20)
#define HW_TIMROT_TIMCTRLn 0x20
#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F
#define BP_TIMROT_TIMCTRLn_SELECT 0
#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030
#define BP_TIMROT_TIMCTRLn_PRESCALE 4
#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040
#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080
#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000
#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000
#define HW_TIMROT_TIMCOUNT0 (0x30 + 0 * 0x20)
#define HW_TIMROT_TIMCOUNT1 (0x30 + 1 * 0x20)
#define HW_TIMROT_TIMCOUNT2 (0x30 + 2 * 0x20)
#define HW_TIMROT_TIMCOUNTn 0x30
#endif
arch/arm/mach-stmp378x/include/mach/regs-tvenc.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: TVENC register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_TVENC_BASE (STMP3XXX_REGS_BASE + 0x38000)
#define REGS_TVENC_PHYS 0x80038000
#define REGS_TVENC_SIZE 0x2000
#define HW_TVENC_CTRL 0x0
#define BM_TVENC_CTRL_CLKGATE 0x40000000
#define BM_TVENC_CTRL_SFTRST 0x80000000
#define HW_TVENC_CONFIG 0x10
#define BM_TVENC_CONFIG_ENCD_MODE 0x00000007
#define BP_TVENC_CONFIG_ENCD_MODE 0
#define BM_TVENC_CONFIG_SYNC_MODE 0x00000070
#define BP_TVENC_CONFIG_SYNC_MODE 4
#define BM_TVENC_CONFIG_FSYNC_PHS 0x00000200
#define BM_TVENC_CONFIG_CGAIN 0x0000C000
#define BP_TVENC_CONFIG_CGAIN 14
#define BM_TVENC_CONFIG_YGAIN_SEL 0x00030000
#define BP_TVENC_CONFIG_YGAIN_SEL 16
#define BM_TVENC_CONFIG_PAL_SHAPE 0x00100000
#define HW_TVENC_SYNCOFFSET 0x30
#define HW_TVENC_COLORSUB0 0xC0
#define HW_TVENC_COLORBURST 0x140
#define BM_TVENC_COLORBURST_PBA 0x00FF0000
#define BP_TVENC_COLORBURST_PBA 16
#define BM_TVENC_COLORBURST_NBA 0xFF000000
#define BP_TVENC_COLORBURST_NBA 24
#define HW_TVENC_MACROVISION0 0x150
#define HW_TVENC_MACROVISION1 0x160
#define HW_TVENC_MACROVISION2 0x170
#define HW_TVENC_MACROVISION3 0x180
#define HW_TVENC_MACROVISION4 0x190
#define HW_TVENC_DACCTRL 0x1A0
#define BM_TVENC_DACCTRL_RVAL 0x00000070
#define BP_TVENC_DACCTRL_RVAL 4
#define BM_TVENC_DACCTRL_DUMP_TOVDD1 0x00000100
#define BM_TVENC_DACCTRL_PWRUP1 0x00001000
#define BM_TVENC_DACCTRL_GAINUP 0x00040000
#define BM_TVENC_DACCTRL_GAINDN 0x00080000
arch/arm/mach-stmp378x/include/mach/regs-uartapp.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: UARTAPP register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_UARTAPP1_BASE (STMP3XXX_REGS_BASE + 0x6C000)
#define REGS_UARTAPP1_PHYS 0x8006C000
#define REGS_UARTAPP2_BASE (STMP3XXX_REGS_BASE + 0x6E000)
#define REGS_UARTAPP2_PHYS 0x8006E000
#define REGS_UARTAPP_SIZE 0x2000
#define HW_UARTAPP_CTRL0 0x0
#define BM_UARTAPP_CTRL0_XFER_COUNT 0x0000FFFF
#define BP_UARTAPP_CTRL0_XFER_COUNT 0
#define BM_UARTAPP_CTRL0_RXTIMEOUT 0x07FF0000
#define BP_UARTAPP_CTRL0_RXTIMEOUT 16
#define BM_UARTAPP_CTRL0_RXTO_ENABLE 0x08000000
#define BM_UARTAPP_CTRL0_RUN 0x20000000
#define BM_UARTAPP_CTRL0_SFTRST 0x80000000
#define BM_UARTAPP_CTRL1_XFER_COUNT 0x0000FFFF
#define BP_UARTAPP_CTRL1_XFER_COUNT 0
#define BM_UARTAPP_CTRL1_RUN 0x10000000
#define HW_UARTAPP_CTRL2 0x20
#define BM_UARTAPP_CTRL2_UARTEN 0x00000001
#define BP_UARTAPP_CTRL2_UARTEN 0
#define BM_UARTAPP_CTRL2_TXE 0x00000100
#define BM_UARTAPP_CTRL2_RXE 0x00000200
#define BM_UARTAPP_CTRL2_RTS 0x00000800
#define BM_UARTAPP_CTRL2_RTSEN 0x00004000
#define BM_UARTAPP_CTRL2_CTSEN 0x00008000
#define BM_UARTAPP_CTRL2_RXDMAE 0x01000000
#define BM_UARTAPP_CTRL2_TXDMAE 0x02000000
#define BM_UARTAPP_CTRL2_DMAONERR 0x04000000
#define HW_UARTAPP_LINECTRL 0x30
#define BM_UARTAPP_LINECTRL_BRK 0x00000001
#define BP_UARTAPP_LINECTRL_BRK 0
#define BM_UARTAPP_LINECTRL_PEN 0x00000002
#define BM_UARTAPP_LINECTRL_EPS 0x00000004
#define BM_UARTAPP_LINECTRL_STP2 0x00000008
#define BM_UARTAPP_LINECTRL_FEN 0x00000010
#define BM_UARTAPP_LINECTRL_WLEN 0x00000060
#define BP_UARTAPP_LINECTRL_WLEN 5
#define BM_UARTAPP_LINECTRL_SPS 0x00000080
#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC 0x00003F00
#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC 8
#define BM_UARTAPP_LINECTRL_BAUD_DIVINT 0xFFFF0000
#define BP_UARTAPP_LINECTRL_BAUD_DIVINT 16
#define HW_UARTAPP_INTR 0x50
#define BM_UARTAPP_INTR_CTSMIS 0x00000002
#define BM_UARTAPP_INTR_RTIS 0x00000040
#define BM_UARTAPP_INTR_CTSMIEN 0x00020000
#define BM_UARTAPP_INTR_RXIEN 0x00100000
#define BM_UARTAPP_INTR_RTIEN 0x00400000
#define HW_UARTAPP_DATA 0x60
#define HW_UARTAPP_STAT 0x70
#define BM_UARTAPP_STAT_RXCOUNT 0x0000FFFF
#define BP_UARTAPP_STAT_RXCOUNT 0
#define BM_UARTAPP_STAT_FERR 0x00010000
#define BM_UARTAPP_STAT_PERR 0x00020000
#define BM_UARTAPP_STAT_BERR 0x00040000
#define BM_UARTAPP_STAT_OERR 0x00080000
#define BM_UARTAPP_STAT_RXFE 0x01000000
#define BM_UARTAPP_STAT_TXFF 0x02000000
#define BM_UARTAPP_STAT_TXFE 0x08000000
#define BM_UARTAPP_STAT_CTS 0x10000000
#define HW_UARTAPP_VERSION 0x90
arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: USBCTRL register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_USBCTRL_BASE (STMP3XXX_REGS_BASE + 0x80000)
#define REGS_USBCTRL_PHYS 0x80080000
#define REGS_USBCTRL_SIZE 0x2000
#define HW_USBCTRL_USBCMD 0x140
#define BM_USBCTRL_USBCMD_RS 0x00000001
#define BP_USBCTRL_USBCMD_RS 0
#define BM_USBCTRL_USBCMD_RST 0x00000002
#define HW_USBCTRL_USBINTR 0x148
#define BM_USBCTRL_USBINTR_UE 0x00000001
#define BP_USBCTRL_USBINTR_UE 0
#define HW_USBCTRL_PORTSC1 0x184
#define BM_USBCTRL_PORTSC1_PHCD 0x00800000
#define HW_USBCTRL_OTGSC 0x1A4
#define BM_USBCTRL_OTGSC_ID 0x00000100
#define BM_USBCTRL_OTGSC_IDIS 0x00010000
#define BM_USBCTRL_OTGSC_IDIE 0x01000000
arch/arm/mach-stmp378x/include/mach/regs-usbphy.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp378x: USBPHY register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_USBPHY_BASE (STMP3XXX_REGS_BASE + 0x7C000)
#define REGS_USBPHY_PHYS 0x8007C000
#define REGS_USBPHY_SIZE 0x2000
#define HW_USBPHY_PWD 0x0
#define HW_USBPHY_CTRL 0x30
#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002
#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010
#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080
#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800
#define BM_USBPHY_CTRL_CLKGATE 0x40000000
#define BM_USBPHY_CTRL_SFTRST 0x80000000
#define HW_USBPHY_STATUS 0x40
#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040
#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100
arch/arm/mach-stmp378x/stmp378x.c deleted 100644 → 0
View file @ e8765afe
/*
* Freescale STMP378X platform support
*
* Embedded Alley Solutions, Inc <source@embeddedalley.com>
*
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <asm/dma.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/pins.h>
#include <mach/pinmux.h>
#include <mach/dma.h>
#include <mach/hardware.h>
#include <mach/system.h>
#include <mach/platform.h>
#include <mach/stmp3xxx.h>
#include <mach/regs-icoll.h>
#include <mach/regs-apbh.h>
#include <mach/regs-apbx.h>
#include <mach/regs-pxp.h>
#include <mach/regs-i2c.h>
#include "stmp378x.h"
/*
* IRQ handling
*/
static void stmp378x_ack_irq(struct irq_data *d)
{
/* Tell ICOLL to release IRQ line */
__raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
/* ACK current interrupt */
__raw_writel(0x01 /* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 */,
REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
/* Barrier */
(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
}
static void stmp378x_mask_irq(struct irq_data *d)
{
/* IRQ disable */
stmp3xxx_clearl(BM_ICOLL_INTERRUPTn_ENABLE,
REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + d->irq * 0x10);
}
static void stmp378x_unmask_irq(struct irq_data *d)
{
/* IRQ enable */
stmp3xxx_setl(BM_ICOLL_INTERRUPTn_ENABLE,
REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + d->irq * 0x10);
}
static struct irq_chip stmp378x_chip = {
.irq_ack = stmp378x_ack_irq,
.irq_mask = stmp378x_mask_irq,
.irq_unmask = stmp378x_unmask_irq,
};
void __init stmp378x_init_irq(void)
{
stmp3xxx_init_irq(&stmp378x_chip);
}
/*
* DMA interrupt handling
*/
void stmp3xxx_arch_dma_enable_interrupt(int channel)
{
void __iomem *c1, *c2;
switch (STMP3XXX_DMA_BUS(channel)) {
case STMP3XXX_BUS_APBH:
c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
break;
case STMP3XXX_BUS_APBX:
c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
break;
default:
return;
}
stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c1);
stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c2);
}
EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
void stmp3xxx_arch_dma_clear_interrupt(int channel)
{
void __iomem *c1, *c2;
switch (STMP3XXX_DMA_BUS(channel)) {
case STMP3XXX_BUS_APBH:
c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
break;
case STMP3XXX_BUS_APBX:
c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
break;
default:
return;
}
stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c1);
stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c2);
}
EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
int stmp3xxx_arch_dma_is_interrupt(int channel)
{
int r = 0;
switch (STMP3XXX_DMA_BUS(channel)) {
case STMP3XXX_BUS_APBH:
r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
(1 << STMP3XXX_DMA_CHANNEL(channel));
break;
case STMP3XXX_BUS_APBX:
r = __raw_readl(REGS_APBX_BASE + HW_APBX_CTRL1) &
(1 << STMP3XXX_DMA_CHANNEL(channel));
break;
}
return r;
}
EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
void stmp3xxx_arch_dma_reset_channel(int channel)
{
unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
void __iomem *c0;
u32 mask;
switch (STMP3XXX_DMA_BUS(channel)) {
case STMP3XXX_BUS_APBH:
c0 = REGS_APBH_BASE + HW_APBH_CTRL0;
mask = chbit << BP_APBH_CTRL0_RESET_CHANNEL;
break;
case STMP3XXX_BUS_APBX:
c0 = REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL;
mask = chbit << BP_APBX_CHANNEL_CTRL_RESET_CHANNEL;
break;
default:
return;
}
/* Reset channel and wait for it to complete */
stmp3xxx_setl(mask, c0);
while (__raw_readl(c0) & mask)
cpu_relax();
}
EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
void stmp3xxx_arch_dma_freeze(int channel)
{
unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
u32 mask = 1 << chbit;
switch (STMP3XXX_DMA_BUS(channel)) {
case STMP3XXX_BUS_APBH:
stmp3xxx_setl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
break;
case STMP3XXX_BUS_APBX:
stmp3xxx_setl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
break;
}
}
EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
void stmp3xxx_arch_dma_unfreeze(int channel)
{
unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
u32 mask = 1 << chbit;
switch (STMP3XXX_DMA_BUS(channel)) {
case STMP3XXX_BUS_APBH:
stmp3xxx_clearl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
break;
case STMP3XXX_BUS_APBX:
stmp3xxx_clearl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
break;
}
}
EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
/*
* The registers are all very closely mapped, so we might as well map them all
* with a single mapping
*
* Logical Physical
* f0000000 80000000 On-chip registers
* f1000000 00000000 32k on-chip SRAM
*/
static struct map_desc stmp378x_io_desc[] __initdata = {
{
.virtual = (u32)STMP3XXX_REGS_BASE,
.pfn = __phys_to_pfn(STMP3XXX_REGS_PHBASE),
.length = STMP3XXX_REGS_SIZE,
.type = MT_DEVICE,
},
{
.virtual = (u32)STMP3XXX_OCRAM_BASE,
.pfn = __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
.length = STMP3XXX_OCRAM_SIZE,
.type = MT_DEVICE,
},
};
static u64 common_dmamask = DMA_BIT_MASK(32);
/*
* devices that are present only on stmp378x, not on all 3xxx boards:
* PxP
* I2C
*/
static struct resource pxp_resource[] = {
{
.flags = IORESOURCE_MEM,
.start = REGS_PXP_PHYS,
.end = REGS_PXP_PHYS + REGS_PXP_SIZE,
}, {
.flags = IORESOURCE_IRQ,
.start = IRQ_PXP,
.end = IRQ_PXP,
},
};
struct platform_device stmp378x_pxp = {
.name = "stmp3xxx-pxp",
.id = -1,
.dev = {
.dma_mask = &common_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(pxp_resource),
.resource = pxp_resource,
};
static struct resource i2c_resources[] = {
{
.flags = IORESOURCE_IRQ,
.start = IRQ_I2C_ERROR,
.end = IRQ_I2C_ERROR,
}, {
.flags = IORESOURCE_MEM,
.start = REGS_I2C_PHYS,
.end = REGS_I2C_PHYS + REGS_I2C_SIZE,
}, {
.flags = IORESOURCE_DMA,
.start = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
.end = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
},
};
struct platform_device stmp378x_i2c = {
.name = "i2c_stmp3xxx",
.id = 0,
.dev = {
.dma_mask = &common_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = i2c_resources,
.num_resources = ARRAY_SIZE(i2c_resources),
};
void __init stmp378x_map_io(void)
{
iotable_init(stmp378x_io_desc, ARRAY_SIZE(stmp378x_io_desc));
}
arch/arm/mach-stmp378x/stmp378x.h deleted 100644 → 0
View file @ e8765afe
/*
* Freescale STMP37XX/STMP378X internal functions and data declarations
*
* Embedded Alley Solutions, Inc <source@embeddedalley.com>
*
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#ifndef __MACH_STMP378X_H
#define __MACH_STMP378X_H
void stmp378x_map_io(void);
void stmp378x_init_irq(void);
extern struct platform_device stmp378x_pxp, stmp378x_i2c;
#endif /* __MACH_STMP378X_COMMON_H */
arch/arm/mach-stmp378x/stmp378x_devb.c deleted 100644 → 0
View file @ e8765afe
/*
* Freescale STMP378X development board support
*
* Embedded Alley Solutions, Inc <source@embeddedalley.com>
*
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/spi/spi.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/pins.h>
#include <mach/pinmux.h>
#include <mach/platform.h>
#include <mach/stmp3xxx.h>
#include <mach/mmc.h>
#include <mach/gpmi.h>
#include "stmp378x.h"
static struct platform_device *devices[] = {
&stmp3xxx_dbguart,
&stmp3xxx_appuart,
&stmp3xxx_watchdog,
&stmp3xxx_touchscreen,
&stmp3xxx_rtc,
&stmp3xxx_keyboard,
&stmp3xxx_framebuffer,
&stmp3xxx_backlight,
&stmp3xxx_rotdec,
&stmp3xxx_persistent,
&stmp3xxx_dcp_bootstream,
&stmp3xxx_dcp,
&stmp3xxx_battery,
&stmp378x_pxp,
&stmp378x_i2c,
};
static struct pin_desc i2c_pins_desc[] = {
{ PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
};
static struct pin_group i2c_pins = {
.pins = i2c_pins_desc,
.nr_pins = ARRAY_SIZE(i2c_pins_desc),
};
static struct pin_desc dbguart_pins_0[] = {
{ PINID_PWM0, PIN_FUN3, },
{ PINID_PWM1, PIN_FUN3, },
};
static struct pin_group dbguart_pins[] = {
[0] = {
.pins = dbguart_pins_0,
.nr_pins = ARRAY_SIZE(dbguart_pins_0),
},
};
static int dbguart_pins_control(int id, int request)
{
int r = 0;
if (request)
r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
else
stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
return r;
}
static struct pin_desc appuart_pins_0[] = {
{ PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
{ PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
{ PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
{ PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
};
static struct pin_desc appuart_pins_1[] = {
#if 0 /* enable these when second appuart will be connected */
{ PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
{ PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
{ PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
{ PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
#endif
};
static struct pin_desc mmc_pins_desc[] = {
{ PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
{ PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
{ PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
{ PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
{ PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
{ PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
{ PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
};
static struct pin_group mmc_pins = {
.pins = mmc_pins_desc,
.nr_pins = ARRAY_SIZE(mmc_pins_desc),
};
static int stmp3xxxmmc_get_wp(void)
{
return gpio_get_value(PINID_PWM4);
}
static int stmp3xxxmmc_hw_init_ssp1(void)
{
int ret;
ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc");
if (ret)
goto out;
/* Configure write protect GPIO pin */
ret = gpio_request(PINID_PWM4, "mmc wp");
if (ret)
goto out_wp;
gpio_direction_input(PINID_PWM4);
/* Configure POWER pin as gpio to drive power to MMC slot */
ret = gpio_request(PINID_PWM3, "mmc power");
if (ret)
goto out_power;
gpio_direction_output(PINID_PWM3, 0);
mdelay(100);
return 0;
out_power:
gpio_free(PINID_PWM4);
out_wp:
stmp3xxx_release_pin_group(&mmc_pins, "mmc");
out:
return ret;
}
static void stmp3xxxmmc_hw_release_ssp1(void)
{
gpio_free(PINID_PWM3);
gpio_free(PINID_PWM4);
stmp3xxx_release_pin_group(&mmc_pins, "mmc");
}
static void stmp3xxxmmc_cmd_pullup_ssp1(int enable)
{
stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc");
}
static unsigned long
stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz)
{
struct clk *ssp, *parent;
char *p;
long r;
ssp = clk_get(NULL, "ssp");
/* using SSP1, no timeout, clock rate 1 */
writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) |
BF(0xFFFF, SSP_TIMING_TIMEOUT),
base + HW_SSP_TIMING);
p = (hz > 1000000) ? "io" : "osc_24M";
parent = clk_get(NULL, p);
clk_set_parent(ssp, parent);
r = clk_set_rate(ssp, 2 * hz / 1000);
clk_put(parent);
clk_put(ssp);
return hz;
}
static struct stmp3xxxmmc_platform_data mmc_data = {
.hw_init = stmp3xxxmmc_hw_init_ssp1,
.hw_release = stmp3xxxmmc_hw_release_ssp1,
.get_wp = stmp3xxxmmc_get_wp,
.cmd_pullup = stmp3xxxmmc_cmd_pullup_ssp1,
.setclock = stmp3xxxmmc_setclock_ssp1,
};
static struct pin_group appuart_pins[] = {
[0] = {
.pins = appuart_pins_0,
.nr_pins = ARRAY_SIZE(appuart_pins_0),
},
[1] = {
.pins = appuart_pins_1,
.nr_pins = ARRAY_SIZE(appuart_pins_1),
},
};
static struct pin_desc ssp1_pins_desc[] = {
{ PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0, },
{ PINID_SSP1_CMD, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
{ PINID_SSP1_DATA0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
{ PINID_SSP1_DATA3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
};
static struct pin_desc ssp2_pins_desc[] = {
{ PINID_GPMI_WRN, PIN_FUN3, PIN_8MA, PIN_3_3V, 0, },
{ PINID_GPMI_RDY1, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
{ PINID_GPMI_D00, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
{ PINID_GPMI_D03, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
};
static struct pin_group ssp1_pins = {
.pins = ssp1_pins_desc,
.nr_pins = ARRAY_SIZE(ssp1_pins_desc),
};
static struct pin_group ssp2_pins = {
.pins = ssp1_pins_desc,
.nr_pins = ARRAY_SIZE(ssp2_pins_desc),
};
static struct pin_desc gpmi_pins_desc[] = {
{ PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
{ PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
{ PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
{ PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
};
static struct pin_group gpmi_pins = {
.pins = gpmi_pins_desc,
.nr_pins = ARRAY_SIZE(gpmi_pins_desc),
};
static struct mtd_partition gpmi_partitions[] = {
[0] = {
.name = "boot",
.size = 10 * SZ_1M,
.offset = 0,
},
[1] = {
.name = "data",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
},
};
static struct gpmi_platform_data gpmi_data = {
.pins = &gpmi_pins,
.nr_parts = ARRAY_SIZE(gpmi_partitions),
.parts = gpmi_partitions,
.part_types = { "cmdline", NULL },
};
static struct spi_board_info spi_board_info[] __initdata = {
#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
{
.modalias = "enc28j60",
.max_speed_hz = 6 * 1000 * 1000,
.bus_num = 1,
.chip_select = 0,
.platform_data = NULL,
},
#endif
};
static void __init stmp378x_devb_init(void)
{
stmp3xxx_pinmux_init(NR_REAL_IRQS);
/* init stmp3xxx platform */
stmp3xxx_init();
stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
stmp3xxx_appuart.dev.platform_data = appuart_pins;
stmp3xxx_mmc.dev.platform_data = &mmc_data;
stmp3xxx_gpmi.dev.platform_data = &gpmi_data;
stmp3xxx_spi1.dev.platform_data = &ssp1_pins;
stmp3xxx_spi2.dev.platform_data = &ssp2_pins;
stmp378x_i2c.dev.platform_data = &i2c_pins;
/* register spi devices */
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
/* add board's devices */
platform_add_devices(devices, ARRAY_SIZE(devices));
/* add devices selected by command line ssp1= and ssp2= options */
stmp3xxx_ssp1_device_register();
stmp3xxx_ssp2_device_register();
}
MACHINE_START(STMP378X, "STMP378X")
.boot_params = 0x40000100,
.map_io = stmp378x_map_io,
.init_irq = stmp378x_init_irq,
.timer = &stmp3xxx_timer,
.init_machine = stmp378x_devb_init,
MACHINE_END
arch/arm/mach-stmp37xx/Makefile deleted 100644 → 0
View file @ e8765afe
obj-$(CONFIG_ARCH_STMP37XX) += stmp37xx.o
obj-$(CONFIG_MACH_STMP37XX) += stmp37xx_devb.o
arch/arm/mach-stmp37xx/Makefile.boot deleted 100644 → 0
View file @ e8765afe
zreladdr-y := 0x40008000
params_phys-y := 0x40000100
initrd_phys-y := 0x40800000
arch/arm/mach-stmp37xx/include/mach/entry-macro.S deleted 100644 → 0
View file @ e8765afe
/*
* Low-level IRQ helper macros for Freescale STMP37XX
*
* Embedded Alley Solutions, Inc <source@embeddedalley.com>
*
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \base, #0xf0000000 @ vm address of IRQ controller
ldr \irqnr, [\base, #0x30] @ HW_ICOLL_STAT
cmp \irqnr, #0x3f
movne \irqstat, #0 @ Ack this IRQ
strne \irqstat, [\base, #0x00]@ HW_ICOLL_VECTOR
moveqs \irqnr, #0 @ Zero flag set for no IRQ
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
arch/arm/mach-stmp37xx/include/mach/irqs.h deleted 100644 → 0
View file @ e8765afe
/*
* Freescale STMP37XX interrupts
*
* Copyright (C) 2005 Sigmatel Inc
*
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#ifndef _ASM_ARCH_IRQS_H
#define _ASM_ARCH_IRQS_H
#define IRQ_DEBUG_UART 0
#define IRQ_COMMS_RX 1
#define IRQ_COMMS_TX 1
#define IRQ_SSP2_ERROR 2
#define IRQ_VDD5V 3
#define IRQ_HEADPHONE_SHORT 4
#define IRQ_DAC_DMA 5
#define IRQ_DAC_ERROR 6
#define IRQ_ADC_DMA 7
#define IRQ_ADC_ERROR 8
#define IRQ_SPDIF_DMA 9
#define IRQ_SAIF2_DMA 9
#define IRQ_SPDIF_ERROR 10
#define IRQ_SAIF1_IRQ 10
#define IRQ_SAIF2_IRQ 10
#define IRQ_USB_CTRL 11
#define IRQ_USB_WAKEUP 12
#define IRQ_GPMI_DMA 13
#define IRQ_SSP1_DMA 14
#define IRQ_SSP_ERROR 15
#define IRQ_GPIO0 16
#define IRQ_GPIO1 17
#define IRQ_GPIO2 18
#define IRQ_SAIF1_DMA 19
#define IRQ_SSP2_DMA 20
#define IRQ_ECC8_IRQ 21
#define IRQ_RTC_ALARM 22
#define IRQ_UARTAPP_TX_DMA 23
#define IRQ_UARTAPP_INTERNAL 24
#define IRQ_UARTAPP_RX_DMA 25
#define IRQ_I2C_DMA 26
#define IRQ_I2C_ERROR 27
#define IRQ_TIMER0 28
#define IRQ_TIMER1 29
#define IRQ_TIMER2 30
#define IRQ_TIMER3 31
#define IRQ_BATT_BRNOUT 32
#define IRQ_VDDD_BRNOUT 33
#define IRQ_VDDIO_BRNOUT 34
#define IRQ_VDD18_BRNOUT 35
#define IRQ_TOUCH_DETECT 36
#define IRQ_LRADC_CH0 37
#define IRQ_LRADC_CH1 38
#define IRQ_LRADC_CH2 39
#define IRQ_LRADC_CH3 40
#define IRQ_LRADC_CH4 41
#define IRQ_LRADC_CH5 42
#define IRQ_LRADC_CH6 43
#define IRQ_LRADC_CH7 44
#define IRQ_LCDIF_DMA 45
#define IRQ_LCDIF_ERROR 46
#define IRQ_DIGCTL_DEBUG_TRAP 47
#define IRQ_RTC_1MSEC 48
#define IRQ_DRI_DMA 49
#define IRQ_DRI_ATTENTION 50
#define IRQ_GPMI_ATTENTION 51
#define IRQ_IR 52
#define IRQ_DCP_VMI 53
#define IRQ_DCP 54
#define IRQ_RESERVED_55 55
#define IRQ_RESERVED_56 56
#define IRQ_RESERVED_57 57
#define IRQ_RESERVED_58 58
#define IRQ_RESERVED_59 59
#define SW_IRQ_60 60
#define SW_IRQ_61 61
#define SW_IRQ_62 62
#define SW_IRQ_63 63
#define NR_REAL_IRQS 64
#define NR_IRQS (NR_REAL_IRQS + 32 * 3)
/* TIMER and BRNOUT are FIQ capable */
#define FIQ_START IRQ_TIMER0
/* Hard disk IRQ is a GPMI attention IRQ */
#define IRQ_HARDDISK IRQ_GPMI_ATTENTION
#endif /* _ASM_ARCH_IRQS_H */
arch/arm/mach-stmp37xx/include/mach/pins.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-apbh.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp37xx: APBH register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _MACH_REGS_APBH
#define _MACH_REGS_APBH
#define REGS_APBH_BASE (STMP3XXX_REGS_BASE + 0x4000)
#define HW_APBH_CTRL0 0x0
#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000
#define BP_APBH_CTRL0_RESET_CHANNEL 16
#define BM_APBH_CTRL0_CLKGATE 0x40000000
#define BM_APBH_CTRL0_SFTRST 0x80000000
#define HW_APBH_CTRL1 0x10
#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001
#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0
#define HW_APBH_DEVSEL 0x20
#define HW_APBH_CH0_NXTCMDAR (0x50 + 0 * 0x70)
#define HW_APBH_CH1_NXTCMDAR (0x50 + 1 * 0x70)
#define HW_APBH_CH2_NXTCMDAR (0x50 + 2 * 0x70)
#define HW_APBH_CH3_NXTCMDAR (0x50 + 3 * 0x70)
#define HW_APBH_CH4_NXTCMDAR (0x50 + 4 * 0x70)
#define HW_APBH_CH5_NXTCMDAR (0x50 + 5 * 0x70)
#define HW_APBH_CH6_NXTCMDAR (0x50 + 6 * 0x70)
#define HW_APBH_CH7_NXTCMDAR (0x50 + 7 * 0x70)
#define HW_APBH_CH8_NXTCMDAR (0x50 + 8 * 0x70)
#define HW_APBH_CH9_NXTCMDAR (0x50 + 9 * 0x70)
#define HW_APBH_CH10_NXTCMDAR (0x50 + 10 * 0x70)
#define HW_APBH_CH11_NXTCMDAR (0x50 + 11 * 0x70)
#define HW_APBH_CH12_NXTCMDAR (0x50 + 12 * 0x70)
#define HW_APBH_CH13_NXTCMDAR (0x50 + 13 * 0x70)
#define HW_APBH_CH14_NXTCMDAR (0x50 + 14 * 0x70)
#define HW_APBH_CH15_NXTCMDAR (0x50 + 15 * 0x70)
#define HW_APBH_CHn_NXTCMDAR 0x50
#define BM_APBH_CHn_CMD_MODE 0x00000003
#define BP_APBH_CHn_CMD_MODE 0x00000001
#define BV_APBH_CHn_CMD_MODE_NOOP 0
#define BV_APBH_CHn_CMD_MODE_WRITE 1
#define BV_APBH_CHn_CMD_MODE_READ 2
#define BV_APBH_CHn_CMD_MODE_SENSE 3
#define BM_APBH_CHn_CMD_CHAIN 0x00000004
#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008
#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010
#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020
#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040
#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080
#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000
#define BP_APBH_CHn_CMD_CMDWORDS 12
#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000
#define BP_APBH_CHn_CMD_XFER_COUNT 16
#define HW_APBH_CH0_SEMA (0x80 + 0 * 0x70)
#define HW_APBH_CH1_SEMA (0x80 + 1 * 0x70)
#define HW_APBH_CH2_SEMA (0x80 + 2 * 0x70)
#define HW_APBH_CH3_SEMA (0x80 + 3 * 0x70)
#define HW_APBH_CH4_SEMA (0x80 + 4 * 0x70)
#define HW_APBH_CH5_SEMA (0x80 + 5 * 0x70)
#define HW_APBH_CH6_SEMA (0x80 + 6 * 0x70)
#define HW_APBH_CH7_SEMA (0x80 + 7 * 0x70)
#define HW_APBH_CH8_SEMA (0x80 + 8 * 0x70)
#define HW_APBH_CH9_SEMA (0x80 + 9 * 0x70)
#define HW_APBH_CH10_SEMA (0x80 + 10 * 0x70)
#define HW_APBH_CH11_SEMA (0x80 + 11 * 0x70)
#define HW_APBH_CH12_SEMA (0x80 + 12 * 0x70)
#define HW_APBH_CH13_SEMA (0x80 + 13 * 0x70)
#define HW_APBH_CH14_SEMA (0x80 + 14 * 0x70)
#define HW_APBH_CH15_SEMA (0x80 + 15 * 0x70)
#define HW_APBH_CHn_SEMA 0x80
#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF
#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0
#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000
#define BP_APBH_CHn_SEMA_PHORE 16
#endif
arch/arm/mach-stmp37xx/include/mach/regs-apbx.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-audioin.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-audioout.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-digctl.h deleted 100644 → 0
View file @ e8765afe
/*
* stmp37xx: DIGCTL register definitions
*
* Copyright (c) 2008 Freescale Semiconductor
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define REGS_DIGCTL_BASE (STMP3XXX_REGS_BASE + 0x1C000)
#define HW_DIGCTL_CTRL 0x0
#define BM_DIGCTL_CTRL_USB_CLKGATE 0x00000004
arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-i2c.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-icoll.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-lradc.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-power.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-pwm.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-rtc.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-ssp.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-timrot.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/stmp37xx.c deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/stmp37xx.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-stmp37xx/stmp37xx_devb.c deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-tegra/include/mach/smp.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-tegra/platsmp.c
View file @ 4b60e5f9
This diff is collapsed.
arch/arm/mach-ux500/include/mach/smp.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-ux500/platsmp.c
View file @ 4b60e5f9
This diff is collapsed.
arch/arm/mach-versatile/core.c
View file @ 4b60e5f9
This diff is collapsed.
arch/arm/mach-vexpress/ct-ca9x4.c
View file @ 4b60e5f9
This diff is collapsed.
arch/arm/mach-vexpress/include/mach/smp.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/mach-vexpress/v2m.c
View file @ 4b60e5f9
This diff is collapsed.
arch/arm/mm/init.c
View file @ 4b60e5f9
This diff is collapsed.
arch/arm/plat-omap/include/plat/flash.h
View file @ 4b60e5f9
This diff is collapsed.
arch/arm/plat-omap/include/plat/smp.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/Kconfig deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/Makefile deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/clock.c deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/clock.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/core.c deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/devices.c deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/dma.c deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/clkdev.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/cputype.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/debug-macro.S deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/dma.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/gpio.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/gpmi.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/hardware.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/io.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/memory.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/mmc.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/pinmux.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/pins.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/platform.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/system.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/timex.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/uncompress.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/include/mach/vmalloc.h deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/irq.c deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/pinmux.c deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-stmp3xxx/timer.c deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
arch/arm/plat-versatile/platsmp.c
View file @ 4b60e5f9
This diff is collapsed.
drivers/mtd/Kconfig
View file @ 4b60e5f9
This diff is collapsed.
drivers/mtd/maps/Makefile
View file @ 4b60e5f9
This diff is collapsed.
drivers/mtd/maps/integrator-flash.c deleted 100644 → 0
View file @ e8765afe
This diff is collapsed.
drivers/mtd/maps/physmap.c
View file @ 4b60e5f9
This diff is collapsed.
drivers/mtd/maps/pismo.c
View file @ 4b60e5f9
This diff is collapsed.
include/linux/mtd/physmap.h
View file @ 4b60e5f9
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7