Skip to content

L
linux
Commit 4ba028e4 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files
Options

Merge tag 'iio-for-6.1a' of... 

Merge tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for 6.1

This includes Nuno Sa's work to move the IIO core over to generic firmware
properties rather than having DT specific code paths. Combined with Andy
Shevchenko's long term work on drivers, this leaves IIO in a good state for
handling other firmware types.

New device support
- liteon,ltrf216a
  * New driver and dt bindings to support this Light sensor.
- maxim,max11205
  * New driver for this 16bit single channel ADC.
- memsensing,msa311
  * New driver for this accelerometer. Includes a string helper for read/write.
- richtek,rtq6056
  * New driver and dt binding to support this current monitor used to measure
    power usage.
- yamaha,yas530
  * Support the YAS537 variant (series includes several fixes for other parts
    and new driver features).

Staging graduation
- adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using
  the posted RFC of that framework.

Features
- core
  * Large rework to make all the core IIO code use generic firmware properties.
    Includes switching some drivers over as well using newly provided
    generic interfaces and allowing removal of DT specific ones.
  * Support for gesture event types for single and double tap. Used in
    bosch,bma400.
- atmel,at91-sama5d2
  * Add support for temperature sensor which uses two muxed inputs to estimate
    the temperature.
  * Handle trackx bits of EMR register to improve temp sampling accuracy.
  * Runtime PM support.
- liteon,ltrf216a
  * Add a _raw channel output to allow working around an issue with
    differing conversions equations that breaks some user space controls.
- mexelis,mlx90632
  * Support regulator control.
- ti,tsc2046
  * External reference voltage support.

Clean up and minor fixes
- Tree-wide
  * devm_clk_get_enabled() replacements of opencoded equivalent.
  * Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers).
  * Various minor warning and similar cleanup such as missing static
    markings.
  * strlcpy() to strscpy() for cases where return value not checked.
  * provide units.h entries for more HZ units and use them in drivers.
- dt-bindings cleanup
  * Drop maintainers listss where the email address is bouncing.
  * Switch spi devices over to using spi-peripheral.yaml
  * Add some missing unevaluatedProperties / additionalProperties: false
    entries.
- ABI docs
  * Add some missing channel type specific sampling frequency entries.
  * Add parameter names for callback parameters.
- MAINTAINERS
  * Fix wrong ADI forum links.
- core
  * lockdep class per device, to avoid an issue with nest when one IIO
    device is the consumer of another.
  * White space tweaks.
- asc,dlhl60d
  * Use get_unaligned_be24 to avoid some unusual data manipulation and masking.
- atmel,at91-sama5d2
  * Fix wrong max value.
  * Improve error handling when measuring pressure and touch.
  * Add locks to remove races on updating oversampling / sampling freq.
  * Add missing calls in suspend and resume path to ensure state is correctly
    brought up if buffered capture was in use when suspend happened.
  * Error out of write_raw() callback if buffered capture enabled to avoid
    unpredictable behavior.
  * Handle different versions having different oversampling ratio support and
    drop excess error checking.
  * Cleanup magic value defines where the name is just the value and hence
    hurts readability.
  * Use read_avail() callback to provide info on possible oversampling ratios.
  * Correctly handle variable bit depth when doing oversampling on different
    supported parts. Also handle higher oversampling ratios.
- fsl,imx8qxp
  * Don't ignore errors from regulator_get_voltage() so as to avoid some
    very surprising scaling.
- invensense,icp10100
  * Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made
    sense and is now deprecated. In this driver we just avoid double disabling
    in some paths.
- maxim,max1363
  * Drop consumer channel map provision by platform data. There have been
    better ways of doing this for years and there are no in tree users.
- microchip,mcp3911
  * Update status to maintained.
- qcom,spmi-adc5
  * Support measurement of LDO output voltage.
- qcom,spmi-adc
  * Add missing channel available on SM6125 SoC.
- st,stmpe
  * Drop requirement on node name in binding now that driver correctly
    doesn't enforce it.
- stx104
  * Move to more appropriate addac directory
- ti,am335x
  * Document ti,am654-adc compatible already in use in tree.
- ti,hmc5843
  * Move dev_pm_ops out of header and use new pm macros to handle export.
- yamaha,yas530
  * Minor cleanups.

* tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits)
  iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS().
  iio: adc: max1363: Drop provision to provide an IIO channel map via platform data
  iio: accel: bma400: Add support for single and double tap events
  iio: Add new event type gesture and use direction for single and double tap
  iio: Use per-device lockdep class for mlock
  iio: adc: add max11205 adc driver
  dt-bindings: iio: adc: Add max11205 documentation file
  iio: magnetometer: yamaha-yas530: Use dev_err_probe()
  iio: magnetometer: yamaha-yas530: Make strings const in chip info
  iio: magnetometer: yamaha-yas530: Use pointers as driver data
  iio: adc: tsc2046: silent spi_device_id warning
  iio: adc: tsc2046: add vref support
  dt-bindings: iio: adc: ti,tsc2046: add vref-supply property
  iio: light: ltrf216a: Add raw attribute
  dt-bindings: iio: Add missing (unevaluated|additional)Properties on child nodes
  MAINTAINERS: fix Analog Devices forum links
  iio/accel: fix repeated words in comments
  dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
  iio: add MEMSensing MSA311 3-axis accelerometer driver
  dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
  ...
parents bfbb5884 2f61ff82
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 5989 additions and 1350 deletions
Documentation/ABI/testing/sysfs-bus-iio
View file @ 4ba028e4
......@@ -196,7 +196,7 @@ Description:
Raw capacitance measurement from channel Y. Units after
application of scale and offset are nanofarads.
What: /sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
KernelVersion: 3.2
Contact: linux-iio@vger.kernel.org
Description:
......@@ -207,6 +207,25 @@ Description:
is required is a consistent labeling. Units after application
of scale and offset are nanofarads.
What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint
KernelVersion: 6.1
Contact: linux-iio@vger.kernel.org
Description:
For differential channels, this an offset that is applied
equally to both inputs. As the reading is of the difference
between the two inputs, this should not be applied to the _raw
reading by userspace (unlike _offset) and unlike calibbias
it does not affect the differential value measured because
the effect of _zeropoint cancels out across the two inputs
that make up the differential pair. It's purpose is to bring
the individual signals, before the differential is measured,
within the measurement range of the device. The naming is
chosen because if the separate inputs that make the
differential pair are drawn on a graph in their
_raw units, this is the value that the zero point on the
measurement axis represents. It is expressed with the
same scaling as _raw.
What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw
What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw
What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
......@@ -2038,3 +2057,83 @@ Description:
Available range for the forced calibration value, expressed as:
- a range specified as "[min step max]"
What: /sys/bus/iio/devices/iio:deviceX/in_voltageX_sampling_frequency
What: /sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency
What: /sys/bus/iio/devices/iio:deviceX/in_currentZ_sampling_frequency
KernelVersion: 5.20
Contact: linux-iio@vger.kernel.org
Description:
Some devices have separate controls of sampling frequency for
individual channels. If multiple channels are enabled in a scan,
then the sampling_frequency of the scan may be computed from the
per channel sampling frequencies.
What: /sys/.../events/in_accel_gesture_singletap_en
What: /sys/.../events/in_accel_gesture_doubletap_en
KernelVersion: 6.1
Contact: linux-iio@vger.kernel.org
Description:
Device generates an event on a single or double tap.
What: /sys/.../events/in_accel_gesture_singletap_value
What: /sys/.../events/in_accel_gesture_doubletap_value
KernelVersion: 6.1
Contact: linux-iio@vger.kernel.org
Description:
Specifies the threshold value that the device is comparing
against to generate the tap gesture event. The lower
threshold value increases the sensitivity of tap detection.
Units and the exact meaning of value are device-specific.
What: /sys/.../events/in_accel_gesture_tap_value_available
KernelVersion: 6.1
Contact: linux-iio@vger.kernel.org
Description:
Lists all available threshold values which can be used to
modify the sensitivity of the tap detection.
What: /sys/.../events/in_accel_gesture_singletap_reset_timeout
What: /sys/.../events/in_accel_gesture_doubletap_reset_timeout
KernelVersion: 6.1
Contact: linux-iio@vger.kernel.org
Description:
Specifies the timeout value in seconds for the tap detector
to not to look for another tap event after the event as
occurred. Basically the minimum quiet time between the two
single-tap's or two double-tap's.
What: /sys/.../events/in_accel_gesture_tap_reset_timeout_available
KernelVersion: 6.1
Contact: linux-iio@vger.kernel.org
Description:
Lists all available tap reset timeout values. Units in seconds.
What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay
KernelVersion: 6.1
Contact: linux-iio@vger.kernel.org
Description:
Specifies the minimum quiet time in seconds between the two
taps of a double tap.
What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available
KernelVersion: 6.1
Contact: linux-iio@vger.kernel.org
Description:
Lists all available delay values between two taps in the double
tap. Units in seconds.
What: /sys/.../events/in_accel_gesture_tap_maxtomin_time
KernelVersion: 6.1
Contact: linux-iio@vger.kernel.org
Description:
Specifies the maximum time difference allowed between upper
and lower peak of tap to consider it as the valid tap event.
Units in seconds.
What: /sys/.../events/in_accel_gesture_tap_maxtomin_time_available
KernelVersion: 6.1
Contact: linux-iio@vger.kernel.org
Description:
Lists all available time values between upper peak to lower
peak. Units in seconds.
Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 0 → 100644
View file @ 4ba028e4
What: /sys/.../iio:deviceX/in_capacitableY_calibbias_calibration
What: /sys/.../iio:deviceX/in_capacitableY_calibscale_calibration
KernelVersion: 6.1
Contact: linux-iio@vger.kernel.org
Description:
Write 1 to trigger a calibration of the calibbias or
calibscale. For calibscale, a full scale capacitance should
be connected to the capacitance input and a
calibscale_calibration then started. For calibbias see
the device datasheet section on "capacitive system offset
calibration".
Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
View file @ 4ba028e4
......@@ -27,15 +27,16 @@ properties:
interrupts:
maxItems: 1
spi-max-frequency: true
vdd-supply: true
required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
View file @ 4ba028e4
......@@ -25,14 +25,15 @@ properties:
interrupts:
maxItems: 1
spi-max-frequency: true
required:
- compatible
- reg
- interrupts
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
View file @ 4ba028e4
......@@ -24,8 +24,6 @@ properties:
spi-3wire: true
spi-max-frequency: true
vs-supply:
description: Regulator that supplies power to the accelerometer
......@@ -48,7 +46,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
View file @ 4ba028e4
......@@ -32,8 +32,6 @@ properties:
spi-cpol: true
spi-max-frequency: true
interrupts:
maxItems: 1
......@@ -42,7 +40,10 @@ required:
- reg
- interrupts
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
View file @ 4ba028e4
......@@ -45,13 +45,14 @@ properties:
vddio-supply:
description: Regulator that provides power to the bus
spi-max-frequency: true
required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
View file @ 4ba028e4
......@@ -35,8 +35,6 @@ properties:
interrupts:
maxItems: 1
spi-max-frequency: true
vdd-supply: true
vddio-supply: true
......@@ -45,7 +43,10 @@ required:
- reg
- interrupts
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
View file @ 4ba028e4
......@@ -25,14 +25,15 @@ properties:
interrupts:
maxItems: 1
spi-max-frequency: true
required:
- compatible
- reg
- interrupts
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
View file @ 4ba028e4
......@@ -20,8 +20,6 @@ properties:
interrupts:
maxItems: 1
spi-max-frequency: true
vdda-supply: true
vddd-supply: true
vddio-supply: true
......@@ -30,7 +28,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
View file @ 4ba028e4
......@@ -72,7 +72,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
View file @ 4ba028e4
......@@ -24,8 +24,6 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
vdd-supply: true
vddio-supply: true
......@@ -50,7 +48,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
View file @ 4ba028e4
......@@ -39,13 +39,14 @@ properties:
- "INT1"
- "INT2"
spi-max-frequency: true
required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
View file @ 4ba028e4
......@@ -29,13 +29,14 @@ properties:
mount-matrix:
description: an optional 3x3 mounting rotation matrix.
spi-max-frequency: true
required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml 0 → 100644
View file @ 4ba028e4
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: "http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: MEMSensing digital 3-Axis accelerometer
maintainers:
- Dmitry Rokosov <ddrokosov@sberdevices.ru>
description: |
MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
sensitivity consumer applications. It has dynamical user selectable full
scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
with output data rates from 1Hz to 1000Hz.
Datasheet can be found at following URL
https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf
properties:
compatible:
const: memsensing,msa311
reg:
maxItems: 1
interrupts:
maxItems: 1
vdd-supply: true
required:
- compatible
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
accelerometer@62 {
compatible = "memsensing,msa311";
reg = <0x62>;
interrupt-parent = <&gpio_intc>;
interrupts = <29 IRQ_TYPE_EDGE_RISING>;
vdd-supply = <&vcc_5v>;
};
};
Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
View file @ 4ba028e4
......@@ -29,7 +29,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
View file @ 4ba028e4
......@@ -27,8 +27,6 @@ properties:
vdd-supply:
description: phandle to the regulator that provides power to the accelerometer
spi-max-frequency: true
interrupts:
maxItems: 1
......@@ -44,7 +42,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
View file @ 4ba028e4
......@@ -52,8 +52,6 @@ properties:
avdd-supply:
description: avdd supply can be used as reference for conversion.
spi-max-frequency: true
required:
- compatible
- reg
......@@ -106,7 +104,10 @@ patternProperties:
additionalProperties: false
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
View file @ 4ba028e4
......@@ -30,8 +30,6 @@ properties:
spi-cpha: true
spi-max-frequency: true
clocks:
maxItems: 1
description: phandle to the master clock (mclk)
......@@ -94,7 +92,10 @@ required:
- spi-cpol
- spi-cpha
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
View file @ 4ba028e4
......@@ -28,8 +28,6 @@ properties:
description: IRQ line for the ADC
maxItems: 1
spi-max-frequency: true
adi,voltage-alert-last-chan:
$ref: /schemas/types.yaml#/definitions/uint32
description:
......@@ -55,7 +53,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
View file @ 4ba028e4
......@@ -30,8 +30,6 @@ properties:
spi-cpha: true
spi-max-frequency: true
'#address-cells':
const: 1
......@@ -65,7 +63,10 @@ patternProperties:
additionalProperties: true
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
View file @ 4ba028e4
......@@ -24,13 +24,15 @@ properties:
vref-supply: true
vdd-supply: true
spi-max-frequency: true
required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
View file @ 4ba028e4
......@@ -66,8 +66,6 @@ properties:
to the other supplies. Needed to be able to establish channel scaling
unless there is also an internal reference available (e.g. ad7091r)
spi-max-frequency: true
adi,conversion-start-gpios:
description: A GPIO used to trigger the start of a conversion
maxItems: 1
......@@ -76,9 +74,9 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
# Devices where reference is vcc
- if:
properties:
......@@ -158,6 +156,8 @@ allOf:
properties:
adi,conversion-start-gpios: false
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
View file @ 4ba028e4
......@@ -32,8 +32,6 @@ properties:
spi-cpol: true
spi-max-frequency: true
avcc-supply: true
interrupts:
......@@ -105,7 +103,10 @@ required:
- interrupts
- adi,conversion-start-gpios
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
View file @ 4ba028e4
......@@ -50,8 +50,6 @@ properties:
reset-gpios:
maxItems: 1
spi-max-frequency: true
spi-cpol: true
spi-cpha: true
......@@ -88,7 +86,10 @@ patternProperties:
- reg
additionalProperties: false
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
View file @ 4ba028e4
......@@ -8,7 +8,6 @@ title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs.
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
- Patrick Vasseur <patrick.vasseur@c-s.fr>
description: |
Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908,
......@@ -43,13 +42,14 @@ properties:
'#size-cells':
const: 0
spi-max-frequency: true
required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
View file @ 4ba028e4
......@@ -49,8 +49,6 @@ properties:
default: 4096000
spi-max-frequency: true
'#io-channel-cells':
const: 1
......@@ -64,7 +62,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
View file @ 4ba028e4
......@@ -24,8 +24,6 @@ properties:
GPIO used for controlling the reset pin
maxItems: 1
spi-max-frequency: true
"#io-channel-cells":
const: 1
......@@ -33,7 +31,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
View file @ 4ba028e4
......@@ -22,15 +22,15 @@ properties:
reg:
maxItems: 1
spi-max-frequency:
description: maximal spi bus frequency supported
required:
- compatible
- vref-supply
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
View file @ 4ba028e4
......@@ -45,7 +45,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
View file @ 4ba028e4
......@@ -26,13 +26,16 @@ properties:
minimum: 100000
maximum: 4800000
additionalProperties: false
required:
- compatible
- reg
- vref-supply
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
View file @ 4ba028e4
......@@ -28,23 +28,25 @@ properties:
vref-supply:
description: External reference, needed to establish input scaling
if:
properties:
compatible:
contains:
const: maxim,max1118
then:
required:
- vref-supply
else:
properties:
vref-supply: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
contains:
const: maxim,max1118
then:
required:
- vref-supply
else:
properties:
vref-supply: false
required:
- compatible
- reg
additionalProperties: false
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml 0 → 100644
View file @ 4ba028e4
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Maxim MAX11205 ADC
maintainers:
- Ramona Bolboaca <ramona.bolboaca@analog.com>
description: |
The MAX11205 is an ultra-low-power (< 300FA max active current),
high-resolution, serial-output ADC.
https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
properties:
compatible:
enum:
- maxim,max11205a
- maxim,max11205b
reg:
maxItems: 1
interrupts:
maxItems: 1
spi-max-frequency:
maximum: 5000000
spi-cpha: true
vref-supply:
description:
The regulator supply for the ADC reference voltage. This is a differential
reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V.
required:
- compatible
- reg
- interrupts
- spi-max-frequency
- spi-cpha
- vref-supply
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "maxim,max11205a";
reg = <0>;
spi-max-frequency = <5000000>;
spi-cpha;
interrupt-parent = <&gpio>;
interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
vref-supply = <&max11205_vref>;
};
};
...
Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
View file @ 4ba028e4
......@@ -39,15 +39,16 @@ properties:
thus enabling power-down mode.
maxItems: 1
spi-max-frequency: true
required:
- compatible
- reg
- vdd-supply
- vref-supply
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
View file @ 4ba028e4
......@@ -32,7 +32,6 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
spi-cpha: true
spi-cpol: true
......@@ -51,7 +50,10 @@ required:
- reg
- vref-supply
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
View file @ 4ba028e4
......@@ -51,7 +51,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
View file @ 4ba028e4
......@@ -58,6 +58,7 @@ required:
patternProperties:
"^.*@[0-9a-f]+$":
type: object
additionalProperties: false
description: |
Represents the external channels which are connected to the ADC.
For compatible property "qcom,spmi-vadc" following channels, also known as
......
Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml 0 → 100644
View file @ 4ba028e4
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC
maintainers:
- ChiYuan Huang <cy_huang@richtek.com>
description: |
The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
interface, and the device provides full information for system by reading
out the loading current and power.
The device monitors both of the drops across sense resistor and the BUS
voltage, converts into the current in amperes, and power in watts through
internal analog-to-digital converter ADC. The programmable calibration,
adjustable conversion time, and averaging function are also built in for
more design flexibility.
Datasheet is available at
https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
properties:
compatible:
const: richtek,rtq6056
reg:
maxItems: 1
"#io-channel-cells":
const: 1
shunt-resistor-micro-ohms:
description: Shunt IN+/IN- sensing node resistor
required:
- compatible
- reg
- "#io-channel-cells"
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
adc@40 {
compatible = "richtek,rtq6056";
reg = <0x40>;
#io-channel-cells = <1>;
};
};
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
View file @ 4ba028e4
......@@ -72,6 +72,7 @@ additionalProperties: false
patternProperties:
"^filter@[0-9]+$":
type: object
unevaluatedProperties: false
description: child node
properties:
......@@ -225,6 +226,7 @@ patternProperties:
patternProperties:
"^dfsdm-dai+$":
type: object
additionalProperties: false
description: child node
properties:
......
Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
View file @ 4ba028e4
......@@ -13,8 +13,7 @@ description:
This ADC forms part of an ST microelectronics STMPE multifunction device .
The ADC is shared with the STMPE touchscreen. As a result some ADC related
settings are specified in the parent node.
The node name myst be stmpe_adc and should be a child node of the stmpe node
to which it belongs.
The node should be a child node of the stmpe node to which it belongs.
properties:
compatible:
......
Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
View file @ 4ba028e4
......@@ -24,8 +24,6 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
vref-supply:
description: External reference, needed to establish input scaling
......@@ -37,7 +35,10 @@ required:
- reg
- vref-supply
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
View file @ 4ba028e4
......@@ -19,8 +19,6 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
vref-supply:
description: External reference, needed to establish input scaling
......@@ -37,7 +35,10 @@ required:
- spi-cpol
- spi-cpha
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
View file @ 4ba028e4
......@@ -19,7 +19,6 @@ properties:
reg: true
vref-supply: true
spi-max-frequency: true
"#io-channel-cells":
const: 1
......@@ -28,7 +27,10 @@ required:
- reg
- vref-supply
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
View file @ 4ba028e4
......@@ -31,8 +31,6 @@ properties:
maxItems: 1
description: Conversion clock input.
spi-max-frequency: true
vref-p-supply:
description: The regulator supply for positive analog voltage reference
......@@ -62,7 +60,10 @@ required:
- clocks
- vref-p-supply
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
View file @ 4ba028e4
......@@ -27,8 +27,6 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
vref-supply: true
"#io-channel-cells":
......@@ -39,7 +37,10 @@ required:
- reg
- vref-supply
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
View file @ 4ba028e4
......@@ -21,8 +21,6 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
vdda-supply: true
"#io-channel-cells":
......@@ -32,7 +30,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
View file @ 4ba028e4
......@@ -43,6 +43,7 @@ additionalProperties: false
patternProperties:
"^channel@[0-7]+$":
type: object
additionalProperties: false
description:
Child nodes needed for each channel that the platform uses.
......
Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
View file @ 4ba028e4
......@@ -18,8 +18,6 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
spi-cpha: true
reset-gpios:
......@@ -32,7 +30,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
View file @ 4ba028e4
......@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs
maintainers:
- Tomislav Denis <tomislav.denis@avl.com>
- Jonathan Cameron <jic23@kernel.org>
description: |
The ADS131E0x are a family of multichannel, simultaneous sampling,
......@@ -28,8 +28,6 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
spi-cpha: true
clocks:
......@@ -120,7 +118,10 @@ patternProperties:
additionalProperties: false
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
View file @ 4ba028e4
......@@ -19,8 +19,6 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
vref-supply:
description: Supply the 2.5V or 5V reference voltage
......@@ -32,7 +30,10 @@ required:
- reg
- vref-supply
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
View file @ 4ba028e4
......@@ -25,13 +25,14 @@ properties:
description: Optional external reference. If not supplied, assume
REFSEL input tied low to enable the internal reference.
spi-max-frequency: true
required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
View file @ 4ba028e4
......@@ -11,9 +11,14 @@ maintainers:
properties:
compatible:
enum:
- ti,am3359-adc
- ti,am4372-adc
oneOf:
- enum:
- ti,am3359-adc
- ti,am4372-adc
- items:
- enum:
- ti,am654-adc
- const: ti,am3359-adc
'#io-channel-cells':
const: 1
......
Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
View file @ 4ba028e4
......@@ -21,8 +21,6 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
vref-supply: true
"#io-channel-cells":
......@@ -33,7 +31,10 @@ required:
- reg
- vref-supply
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
View file @ 4ba028e4
......@@ -23,7 +23,8 @@ properties:
interrupts:
maxItems: 1
spi-max-frequency: true
vref-supply:
description: Optional supply of the reference voltage
"#io-channel-cells":
const: 1
......@@ -59,7 +60,10 @@ patternProperties:
additionalProperties: false
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
View file @ 4ba028e4
......@@ -134,6 +134,7 @@ properties:
ams-pl@400:
type: object
additionalProperties: false
description:
PL-SYSMON is capable of monitoring off chip voltage and temperature.
PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
......
Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
View file @ 4ba028e4
......@@ -63,6 +63,7 @@ additionalProperties: false
patternProperties:
"^channel@[0-3]$":
type: object
additionalProperties: false
description: Represents the external channels which are connected to the device.
properties:
......
Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
View file @ 4ba028e4
......@@ -27,14 +27,15 @@ properties:
Enable internal buffer to drive the reference pin.
type: boolean
spi-max-frequency: true
required:
- compatible
- reg
- avdd-supply
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
View file @ 4ba028e4
......@@ -78,6 +78,7 @@ patternProperties:
custom-output-range-config:
type: object
additionalProperties: false
description: Configuration of custom range when
adi,output-range-microvolt is not present.
The formulas for calculation the output voltages are
......
Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
View file @ 4ba028e4
......@@ -95,15 +95,12 @@ properties:
vrefD-supply: true
vref-supply: true
spi-max-frequency: true
additionalProperties: false
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- # Shared external vref, no internal reference
if:
properties:
......@@ -232,6 +229,8 @@ allOf:
- vrefA-supply
- vrefB-supply
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
View file @ 4ba028e4
......@@ -28,10 +28,6 @@ properties:
vref1-supply: true
vref2-supply: true
spi-max-frequency: true
additionalProperties: false
required:
- compatible
- reg
......@@ -39,6 +35,7 @@ required:
- vref1-supply
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
......@@ -63,6 +60,8 @@ allOf:
required:
- vref2-supply
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
View file @ 4ba028e4
......@@ -39,14 +39,15 @@ properties:
description:
If not supplied devices will use internal regulators.
spi-max-frequency: true
additionalProperties: false
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
View file @ 4ba028e4
......@@ -26,13 +26,14 @@ properties:
maxItems: 1
description: Fault signal.
spi-max-frequency: true
required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
View file @ 4ba028e4
......@@ -27,19 +27,16 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
VREF-supply: true
VREFA-supply: true
VREFB-supply: true
additionalProperties: false
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
......@@ -72,6 +69,8 @@ allOf:
- VREFA-supply
- VREFB-supply
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
View file @ 4ba028e4
......@@ -22,17 +22,18 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
vref-supply:
description: If not present, internal reference will be used.
additionalProperties: false
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
View file @ 4ba028e4
......@@ -53,14 +53,15 @@ properties:
vcc-supply:
description: If not supplied the internal reference is used.
spi-max-frequency: true
additionalProperties: false
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
View file @ 4ba028e4
......@@ -25,8 +25,6 @@ properties:
description: Either this or spi-cpol but not both.
spi-cpol: true
spi-max-frequency: true
adi,ext-dc-dc-compenstation-resistor:
$ref: /schemas/types.yaml#/definitions/flag
description:
......@@ -67,8 +65,6 @@ required:
- compatible
- reg
additionalProperties: false
patternProperties:
"^channel@[0-7]$":
type: object
......@@ -123,6 +119,11 @@ oneOf:
- required:
- spi-cpol
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
View file @ 4ba028e4
......@@ -16,7 +16,6 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
spi-cpha: true
adi,dc-dc-mode:
......@@ -99,6 +98,7 @@ required:
- adi,dc-dc-mode
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
adi,dc-dc-mode:
......@@ -115,7 +115,7 @@ allOf:
required:
- adi,range-microvolt
additionalProperties: false
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
View file @ 4ba028e4
......@@ -22,18 +22,15 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
vref-supply:
description: If not supplied, internal reference will be used.
additionalProperties: false
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
......@@ -45,6 +42,8 @@ allOf:
required:
- vref-supply
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
View file @ 4ba028e4
......@@ -22,18 +22,15 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
vrefAB-supply: true
vrefCD-supply: true
additionalProperties: false
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
......@@ -46,6 +43,8 @@ allOf:
- vrefAB-supply
- vrefCD-supply
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
View file @ 4ba028e4
......@@ -49,8 +49,6 @@ properties:
asserted during driver probe.
maxItems: 1
spi-max-frequency: true
'#address-cells':
const: 1
......@@ -62,6 +60,7 @@ properties:
connected to the DAC. Channel 0 can act both as a current
source and sink.
type: object
additionalProperties: false
properties:
reg:
......@@ -85,6 +84,7 @@ properties:
description: Represents an external channel which are
connected to the DAC.
type: object
additionalProperties: false
properties:
reg:
......@@ -101,6 +101,7 @@ properties:
description: Represents an external channel which are
connected to the DAC.
type: object
additionalProperties: false
properties:
reg:
......@@ -116,6 +117,7 @@ properties:
patternProperties:
"^channel@([3-5])$":
type: object
additionalProperties: false
description: Represents the external channels which are connected to the DAC.
properties:
reg:
......@@ -138,7 +140,10 @@ required:
- channel@4
- channel@5
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
View file @ 4ba028e4
......@@ -23,19 +23,20 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
vdd-supply: true
vss-supply: true
additionalProperties: false
required:
- compatible
- reg
- vdd-supply
- vss-supply
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
View file @ 4ba028e4
......@@ -19,19 +19,16 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
vrefh-supply: true
vrefl-supply: true
additionalProperties: false
required:
- compatible
- reg
- vrefh-supply
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
......@@ -44,6 +41,8 @@ allOf:
properties:
vrefl-supply: false
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
View file @ 4ba028e4
......@@ -48,6 +48,7 @@ properties:
patternProperties:
"^channel@([0-9]|1[0-5])$":
type: object
additionalProperties: false
properties:
reg:
......
Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
View file @ 4ba028e4
......@@ -21,17 +21,18 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
vref-supply: true
additionalProperties: false
required:
- compatible
- reg
- vref-supply
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
View file @ 4ba028e4
......@@ -33,21 +33,22 @@ properties:
vref-supply:
description: Needed to provide output scaling.
spi-max-frequency: true
required:
- compatible
- reg
- vref-supply
additionalProperties: false
oneOf:
- required:
- spi-cpha
- required:
- spi-cpol
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
vref_2v5_reg: regulator-vref {
......
Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
View file @ 4ba028e4
......@@ -24,14 +24,15 @@ properties:
Reference voltage must be supplied to establish the scaling of the
output voltage.
spi-max-frequency: true
required:
- compatible
- reg
- vref-supply
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
View file @ 4ba028e4
......@@ -29,13 +29,14 @@ properties:
DACs are loaded when the pin connected to this GPIO is pulled low.
maxItems: 1
spi-max-frequency: true
required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
View file @ 4ba028e4
......@@ -40,15 +40,16 @@ properties:
output stage will shut down until the ADF4371/ADF4372 achieves lock as
measured by the digital lock detect circuitry.
spi-max-frequency: true
required:
- compatible
- reg
- clocks
- clock-names
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
View file @ 4ba028e4
......@@ -25,14 +25,15 @@ properties:
reset-gpios: true
spi-max-frequency: true
additionalProperties: false
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
......
Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
View file @ 4ba028e4
......@@ -25,8 +25,6 @@ properties:
spi-cpol: true
spi-max-frequency: true
interrupts:
maxItems: 1
......@@ -35,7 +33,10 @@ required:
- reg
- interrupts
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
View file @ 4ba028e4
......@@ -47,8 +47,6 @@ properties:
- DIO3
- DIO4
spi-max-frequency: true
spi-cpha: true
spi-cpol: true
......@@ -96,8 +94,6 @@ properties:
- DIO3
- DIO4
additionalProperties: false
required:
- compatible
- reg
......@@ -106,6 +102,11 @@ required:
- spi-cpol
- spi-max-frequency
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
......
Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
View file @ 4ba028e4
......@@ -46,13 +46,14 @@ properties:
mount-matrix:
description: an optional 3x3 mounting rotation matrix
spi-max-frequency: true
required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
View file @ 4ba028e4
......@@ -47,7 +47,6 @@ properties:
vddio-supply:
description: Regulator that provides power to the bus
spi-max-frequency: true
spi-cpha: true
spi-cpol: true
......@@ -56,7 +55,10 @@ required:
- reg
- interrupts
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
View file @ 4ba028e4
......@@ -40,8 +40,6 @@ properties:
interrupts:
maxItems: 1
spi-max-frequency: true
vdd-supply: true
vddio-supply: true
......@@ -54,6 +52,7 @@ properties:
These devices also support an auxiliary i2c bus via an i2c-gate.
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
not:
properties:
......@@ -67,7 +66,7 @@ allOf:
properties:
i2c-gate: false
additionalProperties: false
unevaluatedProperties: false
required:
- compatible
......
Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
View file @ 4ba028e4
......@@ -36,13 +36,14 @@ properties:
drive-open-drain:
type: boolean
spi-max-frequency: true
required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
View file @ 4ba028e4
......@@ -45,8 +45,6 @@ properties:
description:
Supports up to 2 interrupt lines via the INT1 and INT2 pins.
spi-max-frequency: true
vdd-supply:
description: if defined provides VDD power to the sensor.
......@@ -81,12 +79,15 @@ properties:
wakeup-source:
$ref: /schemas/types.yaml#/definitions/flag
additionalProperties: false
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
......
Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml 0 → 100644
View file @ 4ba028e4
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: LTRF216A Ambient Light Sensor
maintainers:
- Shreeya Patel <shreeya.patel@collabora.com>
description:
Ambient light sensing with an i2c interface.
properties:
compatible:
const: liteon,ltrf216a
reg:
maxItems: 1
interrupts:
maxItems: 1
vdd-supply:
description: Regulator that provides power to the sensor.
required:
- compatible
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
light-sensor@53 {
compatible = "liteon,ltrf216a";
reg = <0x53>;
vdd-supply = <&vdd_regulator>;
interrupt-parent = <&gpio0>;
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
};
};
Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
View file @ 4ba028e4
......@@ -25,14 +25,15 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
additionalProperties: false
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
View file @ 4ba028e4
......@@ -80,14 +80,15 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
additionalProperties: false
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
View file @ 4ba028e4
......@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: All Sensors DLH series low voltage digital pressure sensors
maintainers:
- Tomislav Denis <tomislav.denis@avl.com>
- Jonathan Cameron <jic23@kernel.org>
description: |
Bindings for the All Sensors DLH series pressure sensors.
......
Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
View file @ 4ba028e4
......@@ -40,10 +40,6 @@ properties:
description:
Reset the sensorhub.
spi-max-frequency: true
additionalProperties: false
required:
- compatible
- reg
......@@ -52,6 +48,11 @@ required:
- mcu-ap-gpios
- mcu-reset-gpios
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
......
Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
View file @ 4ba028e4
......@@ -32,7 +32,6 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
spi-cpha: true
required:
......@@ -40,6 +39,7 @@ required:
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
......@@ -53,7 +53,7 @@ allOf:
properties:
spi-cpha: false
additionalProperties: false
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
View file @ 4ba028e4
......@@ -19,7 +19,6 @@ properties:
reg:
maxItems: 1
spi-max-frequency: true
spi-cpha: true
thermocouple-type:
......@@ -34,7 +33,10 @@ required:
- reg
- spi-cpha
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
View file @ 4ba028e4
......@@ -25,7 +25,6 @@ properties:
enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection.
type: boolean
spi-max-frequency: true
spi-cpha: true
required:
......@@ -33,7 +32,10 @@ required:
- reg
- spi-cpha
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
......
Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
View file @ 4ba028e4
......@@ -35,6 +35,9 @@ properties:
maxItems: 1
description: Default is 0x3a, but can be reprogrammed.
vdd-supply:
description: provide VDD power to the sensor.
required:
- compatible
- reg
......@@ -50,6 +53,7 @@ examples:
temp-sensor@3a {
compatible = "melexis,mlx90632";
reg = <0x3a>;
vdd-supply = <&ldo4_reg>;
};
};
...
Documentation/devicetree/bindings/vendor-prefixes.yaml
View file @ 4ba028e4
......@@ -777,6 +777,8 @@ patternProperties:
description: MELFAS Inc.
"^mellanox,.*":
description: Mellanox Technologies
"^memsensing,.*":
description: MEMSensing Microsystems Co., Ltd.
"^memsic,.*":
description: MEMSIC Inc.
"^menlo,.*":
......
MAINTAINERS
View file @ 4ba028e4
......@@ -620,7 +620,7 @@ ADXL367 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
M: Cosmin Tanislav <cosmin.tanislav@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
F: drivers/iio/accel/adxl367*
......@@ -754,14 +754,6 @@ L: Dell.Client.Kernel@dell.com
S: Maintained
F: drivers/platform/x86/dell/alienware-wmi.c
ALL SENSORS DLH SERIES PRESSURE SENSORS DRIVER
M: Tomislav Denis <tomislav.denis@avl.com>
L: linux-iio@vger.kernel.org
S: Maintained
W: http://www.allsensors.com/
F: Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
F: drivers/iio/pressure/dlhl60d.c
ALLEGRO DVT VIDEO IP CORE DRIVER
M: Michael Tretter <m.tretter@pengutronix.de>
R: Pengutronix Kernel Team <kernel@pengutronix.de>
......@@ -1152,7 +1144,7 @@ ANALOG DEVICES INC AD74413R DRIVER
M: Cosmin Tanislav <cosmin.tanislav@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
F: drivers/iio/addac/ad74413r.c
F: include/dt-bindings/iio/addac/adi,ad74413r.h
......@@ -1382,7 +1374,7 @@ APEX EMBEDDED SYSTEMS STX104 IIO DRIVER
M: William Breathitt Gray <william.gray@linaro.org>
L: linux-iio@vger.kernel.org
S: Maintained
F: drivers/iio/adc/stx104.c
F: drivers/iio/addac/stx104.c
APM DRIVER
M: Jiri Kosina <jikos@kernel.org>
......@@ -11929,7 +11921,7 @@ LTC2688 IIO DAC DRIVER
M: Nuno Sá <nuno.sa@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
W: https://ez.analog.com/linux-software-drivers
F: Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
F: Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
F: drivers/iio/dac/ltc2688.c
......@@ -12346,6 +12338,14 @@ S: Maintained
F: Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml
F: drivers/iio/proximity/mb1232.c
MAXIM MAX11205 DRIVER
M: Ramona Bolboaca <ramona.bolboaca@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
F: drivers/iio/adc/max11205.c
MAXIM MAX17040 FAMILY FUEL GAUGE DRIVERS
R: Iskren Chernev <iskren.chernev@gmail.com>
R: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
......@@ -13190,6 +13190,13 @@ F: drivers/mtd/
F: include/linux/mtd/
F: include/uapi/mtd/
MEMSENSING MICROSYSTEMS MSA311 DRIVER
M: Dmitry Rokosov <ddrokosov@sberdevices.ru>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
F: drivers/iio/accel/msa311.c
MEN A21 WATCHDOG DRIVER
M: Johannes Thumshirn <morbidrsa@gmail.com>
L: linux-watchdog@vger.kernel.org
......@@ -13411,7 +13418,7 @@ MICROCHIP MCP3911 ADC DRIVER
M: Marcus Folkesson <marcus.folkesson@gmail.com>
M: Kent Gustavsson <kent@minoris.se>
L: linux-iio@vger.kernel.org
S: Supported
S: Maintained
F: Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
F: drivers/iio/adc/mcp3911.c
......@@ -20260,13 +20267,6 @@ M: Robert Richter <rric@kernel.org>
S: Odd Fixes
F: drivers/gpio/gpio-thunderx.c
TI ADS131E0X ADC SERIES DRIVER
M: Tomislav Denis <tomislav.denis@avl.com>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
F: drivers/iio/adc/ti-ads131e08.c
TI AM437X VPFE DRIVER
M: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
L: linux-media@vger.kernel.org
......
drivers/iio/accel/Kconfig
View file @ 4ba028e4
......@@ -541,6 +541,19 @@ config MMA9553
To compile this driver as a module, choose M here: the module
will be called mma9553.
config MSA311
tristate "MEMSensing Digital 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP_I2C
help
Say yes here to build support for the MEMSensing MSA311
accelerometer driver.
To compile this driver as a module, choose M here: the module will be
called msa311.
config MXC4005
tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
depends on I2C
......
drivers/iio/accel/Makefile
View file @ 4ba028e4
......@@ -58,6 +58,8 @@ obj-$(CONFIG_MMA9551_CORE) += mma9551_core.o
obj-$(CONFIG_MMA9551) += mma9551.o
obj-$(CONFIG_MMA9553) += mma9553.o
obj-$(CONFIG_MSA311) += msa311.o
obj-$(CONFIG_MXC4005) += mxc4005.o
obj-$(CONFIG_MXC6255) += mxc6255.o
......
drivers/iio/accel/adxl345_core.c
View file @ 4ba028e4
......@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/units.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
......@@ -32,7 +33,6 @@
#define ADXL345_BW_RATE GENMASK(3, 0)
#define ADXL345_BASE_RATE_NANO_HZ 97656250LL
#define NHZ_PER_HZ 1000000000LL
#define ADXL345_POWER_CTL_MEASURE BIT(3)
#define ADXL345_POWER_CTL_STANDBY 0x00
......@@ -139,7 +139,7 @@ static int adxl345_read_raw(struct iio_dev *indio_dev,
samp_freq_nhz = ADXL345_BASE_RATE_NANO_HZ <<
(regval & ADXL345_BW_RATE);
*val = div_s64_rem(samp_freq_nhz, NHZ_PER_HZ, val2);
*val = div_s64_rem(samp_freq_nhz, NANOHZ_PER_HZ, val2);
return IIO_VAL_INT_PLUS_NANO;
}
......@@ -164,7 +164,8 @@ static int adxl345_write_raw(struct iio_dev *indio_dev,
ADXL345_REG_OFS_AXIS(chan->address),
val / 4);
case IIO_CHAN_INFO_SAMP_FREQ:
n = div_s64(val * NHZ_PER_HZ + val2, ADXL345_BASE_RATE_NANO_HZ);
n = div_s64(val * NANOHZ_PER_HZ + val2,
ADXL345_BASE_RATE_NANO_HZ);
return regmap_update_bits(data->regmap, ADXL345_REG_BW_RATE,
ADXL345_BW_RATE,
......
drivers/iio/accel/bma400.h
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/accel/bma400_core.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/accel/kxcjk-1013.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/accel/msa311.c 0 → 100644
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/Kconfig
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/Makefile
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/ab8500-gpadc.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/ad7124.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/ad7768-1.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/ad9467.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/at91-sama5d2_adc.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/imx8qxp-adc.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/ingenic-adc.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/lpc18xx_adc.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/max11205.c 0 → 100644
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/max1363.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/mt6360-adc.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/qcom-pm8xxx-xoadc.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/qcom-spmi-adc5.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/qcom-spmi-vadc.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/rtq6056.c 0 → 100644
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/stm32-adc.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/ti-ads131e08.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/ti-tsc2046.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/xilinx-ams.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/adc/xilinx-xadc-core.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/addac/Kconfig
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/addac/Makefile
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/cdc/Kconfig
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/cdc/Makefile
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/common/scmi_sensors/scmi_iio.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/frequency/adf4371.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/frequency/admv1014.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/frequency/adrf6780.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/imu/adis16475.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/industrialio-buffer.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/industrialio-core.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/industrialio-event.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/industrialio-trigger.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/inkern.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/light/Kconfig
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/light/Makefile
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/light/ltrf216a.c 0 → 100644
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/magnetometer/Kconfig
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/magnetometer/hmc5843.h
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/magnetometer/hmc5843_core.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/magnetometer/hmc5843_i2c.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/magnetometer/hmc5843_spi.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/magnetometer/yamaha-yas530.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/pressure/dlhl60d.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/pressure/icp10100.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/temperature/mlx90632.c
View file @ 4ba028e4
This diff is collapsed.
drivers/iio/test/iio-test-rescale.c
View file @ 4ba028e4
This diff is collapsed.
drivers/staging/iio/Kconfig
View file @ 4ba028e4
This diff is collapsed.
drivers/staging/iio/Makefile
View file @ 4ba028e4
This diff is collapsed.
drivers/staging/iio/cdc/Kconfig deleted 100644 → 0
View file @ bfbb5884
This diff is collapsed.
drivers/staging/iio/cdc/Makefile deleted 100644 → 0
View file @ bfbb5884
This diff is collapsed.
drivers/staging/iio/frequency/ad9832.c
View file @ 4ba028e4
This diff is collapsed.
drivers/staging/iio/frequency/ad9834.c
View file @ 4ba028e4
This diff is collapsed.
drivers/staging/iio/meter/ade7854.h
View file @ 4ba028e4
This diff is collapsed.
drivers/staging/iio/resolver/ad2s1210.c
View file @ 4ba028e4
This diff is collapsed.
drivers/thermal/qcom/qcom-spmi-adc-tm5.c
View file @ 4ba028e4
This diff is collapsed.
include/linux/iio/consumer.h
View file @ 4ba028e4
This diff is collapsed.
include/linux/iio/iio-opaque.h
View file @ 4ba028e4
This diff is collapsed.
include/linux/iio/iio.h
View file @ 4ba028e4
This diff is collapsed.
include/linux/iio/types.h
View file @ 4ba028e4
This diff is collapsed.
include/linux/string_helpers.h
View file @ 4ba028e4
This diff is collapsed.
include/linux/units.h
View file @ 4ba028e4
This diff is collapsed.
include/uapi/linux/iio/types.h
View file @ 4ba028e4
This diff is collapsed.
tools/iio/iio_event_monitor.c
View file @ 4ba028e4
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7