Commit 4ba24373 authored by Hermann Pitton's avatar Hermann Pitton Committed by Mauro Carvalho Chehab

V4L/DVB (7082): support for Twinhan Hybrid DTV-DVB 3056 PCI

S-Video is unconfirmed, but likely correct.
The remote is not yet investigated.

Thanks go to Sioux for providing code and asking to fix the auto
detection.
Signed-off-by: default avatarsioux <sioux_it@libero.it>
Signed-off-by: default avatarHermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: default avatarHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent c0e0aff9
......@@ -129,3 +129,4 @@
128 -> Beholder BeholdTV Columbus TVFM [0000:5201]
129 -> Beholder BeholdTV 607 / BeholdTV 609 [5ace:6070,5ace:6071,5ace:6072,5ace:6073,5ace:6090,5ace:6091,5ace:6092,5ace:6093]
130 -> Beholder BeholdTV M6 / BeholdTV M6 Extra [5ace:6190,5ace:6193]
131 -> Twinhan Hybrid DTV-DVB 3056 PCI [1822:0022]
......@@ -3912,6 +3912,36 @@ struct saa7134_board saa7134_boards[] = {
},
.mpeg = SAA7134_MPEG_EMPRESS,
},
[SAA7134_BOARD_TWINHAN_DTV_DVB_3056] = {
.name = "Twinhan Hybrid DTV-DVB 3056 PCI",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tuner_config = 2,
.mpeg = SAA7134_MPEG_DVB,
.gpiomask = 0x0200000,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
}, {
.name = name_comp1,
.vmux = 3,
.amux = LINE1,
}, {
.name = name_svideo,
.vmux = 8, /* untested */
.amux = LINE1,
} },
.radio = {
.name = name_radio,
.amux = TV,
.gpio = 0x0200000,
},
},
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
......@@ -4843,7 +4873,13 @@ struct pci_device_id saa7134_pci_tbl[] = {
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x4e42,
.subdevice = 0x3502,
.driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS
.driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS,
}, {
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x1822, /*Twinhan Technology Co. Ltd*/
.subdevice = 0x0022,
.driver_data = SAA7134_BOARD_TWINHAN_DTV_DVB_3056,
},{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
......@@ -5232,7 +5268,8 @@ int saa7134_board_init2(struct saa7134_dev *dev)
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
case SAA7134_BOARD_AVERMEDIA_SUPER_007:
case SAA7134_BOARD_AVERMEDIA_SUPER_007:
case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
/* this is a hybrid board, initialize to analog mode
* and configure firmware eeprom address
*/
......
......@@ -779,6 +779,21 @@ static struct tda1004x_config avermedia_super_007_config = {
.request_firmware = philips_tda1004x_request_firmware
};
static struct tda1004x_config twinhan_dtv_dvb_3056_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GP01_I,
.if_freq = TDA10046_FREQ_045,
.i2c_gate = 0x42,
.tuner_address = 0x61,
.tuner_config = 2,
.antenna_switch = 1,
.request_firmware = philips_tda1004x_request_firmware
};
/* ------------------------------------------------------------------
* special case: this card uses saa713x GPIO22 for the mode switch
*/
......@@ -1044,6 +1059,9 @@ static int dvb_init(struct saa7134_dev *dev)
case SAA7134_BOARD_AVERMEDIA_SUPER_007:
configure_tda827x_fe(dev, &avermedia_super_007_config);
break;
case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config);
break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
......
......@@ -252,6 +252,7 @@ struct saa7134_format {
#define SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM 128
#define SAA7134_BOARD_BEHOLD_607_9FM 129
#define SAA7134_BOARD_BEHOLD_M6 130
#define SAA7134_BOARD_TWINHAN_DTV_DVB_3056 131
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment