[PATCH] i386: inline asm cleanup

i386 Inline asm cleanup.  Use cr/dr accessor functions.

Also, a potential bugfix.  Also, some CR accessors really should be volatile.
Reads from CR0 (numeric state may change in an exception handler), writes to
CR4 (flipping CR4.TSD) and reads from CR2 (page fault) prevent instruction
re-ordering.  I did not add memory clobber to CR3 / CR4 / CR0 updates, as it
was not there to begin with, and in no case should kernel memory be clobbered,
except when doing a TLB flush, which already has memory clobber.

I noticed that page invalidation does not have a memory clobber.  I can't find
a bug as a result, but there is definitely a potential for a bug here:

#define __flush_tlb_single(addr) \
	__asm__ __volatile__("invlpg %0": :"m" (*(char *) addr))
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/i386/kernel/cpu/common.c

@@ -642,12 +642,12 @@ void __devinit cpu_init(void)
 	asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs");
 
 	/* Clear all 6 debug registers: */
-
-#define CD(register) set_debugreg(0, register)
-
-	CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7);
-
-#undef CD
+	set_debugreg(0, 0);
+	set_debugreg(0, 1);
+	set_debugreg(0, 2);
+	set_debugreg(0, 3);
+	set_debugreg(0, 6);
+	set_debugreg(0, 7);
 
 	/*
 	 * Force FPU initialization:

arch/i386/kernel/cpu/cpufreq/longhaul.c

@@ -64,8 +64,6 @@ static int dont_scale_voltage;
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
 
 
-#define __hlt()     __asm__ __volatile__("hlt": : :"memory")
-
 /* Clock ratios multiplied by 10 */
 static int clock_ratio[32];
 static int eblcr_table[32];
@@ -168,11 +166,9 @@ static void do_powersaver(union msr_longhaul *longhaul,
 	outb(0xFE,0x21);	/* TMR0 only */
 	outb(0xFF,0x80);	/* delay */
 
-	local_irq_enable();
-
-	__hlt();
+	safe_halt();
 	wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
-	__hlt();
+	halt();
 
 	local_irq_disable();
 
@@ -251,9 +247,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
 		bcr2.bits.CLOCKMUL = clock_ratio_index;
 		local_irq_disable();
 		wrmsrl (MSR_VIA_BCR2, bcr2.val);
-		local_irq_enable();
-
-		__hlt();
+		safe_halt();
 
 		/* Disable software clock multiplier */
 		rdmsrl (MSR_VIA_BCR2, bcr2.val);

arch/i386/kernel/cpu/cyrix.c

@@ -132,11 +132,7 @@ static void __init set_cx86_memwb(void)
 	setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
 	/* set 'Not Write-through' */
 	cr0 = 0x20000000;
-	__asm__("movl %%cr0,%%eax\n\t"
-		"orl %0,%%eax\n\t"
-		"movl %%eax,%%cr0\n"
-		: : "r" (cr0)
-		:"ax");
+	write_cr0(read_cr0() | cr0);
 	/* CCR2 bit 2: lock NW bit and set WT1 */
 	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 );
 }

arch/i386/kernel/efi.c

@@ -79,7 +79,7 @@ static void efi_call_phys_prelog(void)
 	 * directory. If I have PSE, I just need to duplicate one entry in
 	 * page directory.
 	 */
-	__asm__ __volatile__("movl %%cr4, %0":"=r"(cr4));
+	cr4 = read_cr4();
 
 	if (cr4 & X86_CR4_PSE) {
 		efi_bak_pg_dir_pointer[0].pgd =
@@ -115,7 +115,7 @@ static void efi_call_phys_epilog(void)
 	cpu_gdt_descr[0].address =
 		(unsigned long) __va(cpu_gdt_descr[0].address);
 	__asm__ __volatile__("lgdt %0":"=m"(cpu_gdt_descr));
-	__asm__ __volatile__("movl %%cr4, %0":"=r"(cr4));
+	cr4 = read_cr4();
 
 	if (cr4 & X86_CR4_PSE) {
 		swapper_pg_dir[pgd_index(0)].pgd =

arch/i386/kernel/machine_kexec.c

@@ -17,13 +17,7 @@
 #include <asm/apic.h>
 #include <asm/cpufeature.h>
 #include <asm/desc.h>
-
-static inline unsigned long read_cr3(void)
-{
-	unsigned long cr3;
-	asm volatile("movl %%cr3,%0": "=r"(cr3));
-	return cr3;
-}
+#include <asm/system.h>
 
 #define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
 

arch/i386/kernel/process.c

@@ -313,16 +313,12 @@ void show_regs(struct pt_regs * regs)
 	printk(" DS: %04x ES: %04x\n",
 		0xffff & regs->xds,0xffff & regs->xes);
 
-	__asm__("movl %%cr0, %0": "=r" (cr0));
-	__asm__("movl %%cr2, %0": "=r" (cr2));
-	__asm__("movl %%cr3, %0": "=r" (cr3));
-	/* This could fault if %cr4 does not exist */
-	__asm__("1: movl %%cr4, %0		\n"
-		"2:				\n"
-		".section __ex_table,\"a\"	\n"
-		".long 1b,2b			\n"
-		".previous			\n"
-		: "=r" (cr4): "0" (0));
+	cr0 = read_cr0();
+	cr2 = read_cr2();
+	cr3 = read_cr3();
+	if (current_cpu_data.x86 > 4) {
+		cr4 = read_cr4();
+	}
 	printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", cr0, cr2, cr3, cr4);
 	show_trace(NULL, &regs->esp);
 }

arch/i386/kernel/smp.c

@@ -576,7 +576,7 @@ static void stop_this_cpu (void * dummy)
 	local_irq_disable();
 	disable_local_APIC();
 	if (cpu_data[smp_processor_id()].hlt_works_ok)
-		for(;;) __asm__("hlt");
+		for(;;) halt();
 	for (;;);
 }
 

arch/i386/mm/fault.c

@@ -233,7 +233,7 @@ fastcall void do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	int write, si_code;
 
 	/* get the address */
-	__asm__("movl %%cr2,%0":"=r" (address));
+        address = read_cr2();
 
 	if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14,
 					SIGSEGV) == NOTIFY_STOP)
@@ -453,7 +453,7 @@ fastcall void do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	printk(" at virtual address %08lx\n",address);
 	printk(KERN_ALERT " printing eip:\n");
 	printk("%08lx\n", regs->eip);
-	asm("movl %%cr3,%0":"=r" (page));
+	page = read_cr3();
 	page = ((unsigned long *) __va(page))[address >> 22];
 	printk(KERN_ALERT "*pde = %08lx\n", page);
 	/*
@@ -526,7 +526,7 @@ fastcall void do_page_fault(struct pt_regs *regs, unsigned long error_code)
 		pmd_t *pmd, *pmd_k;
 		pte_t *pte_k;
 
-		asm("movl %%cr3,%0":"=r" (pgd_paddr));
+		pgd_paddr = read_cr3();
 		pgd = index + (pgd_t *)__va(pgd_paddr);
 		pgd_k = init_mm.pgd + index;
 

arch/i386/mm/pageattr.c

@@ -62,7 +62,7 @@ static void flush_kernel_map(void *dummy)
 { 
 	/* Could use CLFLUSH here if the CPU supports it (Hammer,P4) */
 	if (boot_cpu_data.x86_model >= 4) 
-		asm volatile("wbinvd":::"memory"); 
+		wbinvd();
 	/* Flush all to work around Errata in early athlons regarding 
 	 * large page flushing. 
 	 */

arch/i386/power/cpu.c

@@ -57,10 +57,10 @@ void __save_processor_state(struct saved_context *ctxt)
 	/*
 	 * control registers 
 	 */
-	asm volatile ("movl %%cr0, %0" : "=r" (ctxt->cr0));
-	asm volatile ("movl %%cr2, %0" : "=r" (ctxt->cr2));
-	asm volatile ("movl %%cr3, %0" : "=r" (ctxt->cr3));
-	asm volatile ("movl %%cr4, %0" : "=r" (ctxt->cr4));
+	ctxt->cr0 = read_cr0();
+	ctxt->cr2 = read_cr2();
+	ctxt->cr3 = read_cr3();
+	ctxt->cr4 = read_cr4();
 }
 
 void save_processor_state(void)
@@ -109,10 +109,10 @@ void __restore_processor_state(struct saved_context *ctxt)
 	/*
 	 * control registers
 	 */
-	asm volatile ("movl %0, %%cr4" :: "r" (ctxt->cr4));
-	asm volatile ("movl %0, %%cr3" :: "r" (ctxt->cr3));
-	asm volatile ("movl %0, %%cr2" :: "r" (ctxt->cr2));
-	asm volatile ("movl %0, %%cr0" :: "r" (ctxt->cr0));
+	write_cr4(ctxt->cr4);
+	write_cr3(ctxt->cr3);
+	write_cr2(ctxt->cr2);
+	write_cr2(ctxt->cr0);
 
 	/*
 	 * now restore the descriptor tables to their proper values

include/asm-i386/agp.h

@@ -19,7 +19,7 @@ int unmap_page_from_agp(struct page *page);
 /* Could use CLFLUSH here if the cpu supports it. But then it would
    need to be called for each cacheline of the whole page so it may not be 
    worth it. Would need a page for it. */
-#define flush_agp_cache() asm volatile("wbinvd":::"memory")
+#define flush_agp_cache() wbinvd()
 
 /* Convert a physical address to an address suitable for the GART. */
 #define phys_to_gart(x) (x)

include/asm-i386/bugs.h

@@ -118,7 +118,10 @@ static void __init check_hlt(void)
 		printk("disabled\n");
 		return;
 	}
-	__asm__ __volatile__("hlt ; hlt ; hlt ; hlt");
+	halt();
+	halt();
+	halt();
+	halt();
 	printk("OK.\n");
 }
 

include/asm-i386/processor.h

@@ -203,9 +203,7 @@ static inline unsigned int cpuid_edx(unsigned int op)
 	return edx;
 }
 
-#define load_cr3(pgdir) \
-	asm volatile("movl %0,%%cr3": :"r" (__pa(pgdir)))
-
+#define load_cr3(pgdir) write_cr3(__pa(pgdir))
 
 /*
  * Intel CPU features in CR4
@@ -232,22 +230,20 @@ extern unsigned long mmu_cr4_features;
 
 static inline void set_in_cr4 (unsigned long mask)
 {
+	unsigned cr4;
 	mmu_cr4_features |= mask;
-	__asm__("movl %%cr4,%%eax\n\t"
-		"orl %0,%%eax\n\t"
-		"movl %%eax,%%cr4\n"
-		: : "irg" (mask)
-		:"ax");
+	cr4 = read_cr4();
+	cr4 |= mask;
+	write_cr4(cr4);
 }
 
 static inline void clear_in_cr4 (unsigned long mask)
 {
+	unsigned cr4;
 	mmu_cr4_features &= ~mask;
-	__asm__("movl %%cr4,%%eax\n\t"
-		"andl %0,%%eax\n\t"
-		"movl %%eax,%%cr4\n"
-		: : "irg" (~mask)
-		:"ax");
+	cr4 = read_cr4();
+	cr4 &= ~mask;
+	write_cr4(cr4);
 }
 
 /*

include/asm-i386/system.h

@@ -107,13 +107,33 @@ static inline unsigned long _get_base(char * addr)
 #define clts() __asm__ __volatile__ ("clts")
 #define read_cr0() ({ \
 	unsigned int __dummy; \
-	__asm__( \
+	__asm__ __volatile__( \
 		"movl %%cr0,%0\n\t" \
 		:"=r" (__dummy)); \
 	__dummy; \
 })
 #define write_cr0(x) \
-	__asm__("movl %0,%%cr0": :"r" (x));
+	__asm__ __volatile__("movl %0,%%cr0": :"r" (x));
+
+#define read_cr2() ({ \
+	unsigned int __dummy; \
+	__asm__ __volatile__( \
+		"movl %%cr2,%0\n\t" \
+		:"=r" (__dummy)); \
+	__dummy; \
+})
+#define write_cr2(x) \
+	__asm__ __volatile__("movl %0,%%cr2": :"r" (x));
+
+#define read_cr3() ({ \
+	unsigned int __dummy; \
+	__asm__ ( \
+		"movl %%cr3,%0\n\t" \
+		:"=r" (__dummy)); \
+	__dummy; \
+})
+#define write_cr3(x) \
+	__asm__ __volatile__("movl %0,%%cr3": :"r" (x));
 
 #define read_cr4() ({ \
 	unsigned int __dummy; \
@@ -123,7 +143,7 @@ static inline unsigned long _get_base(char * addr)
 	__dummy; \
 })
 #define write_cr4(x) \
-	__asm__("movl %0,%%cr4": :"r" (x));
+	__asm__ __volatile__("movl %0,%%cr4": :"r" (x));
 #define stts() write_cr0(8 | read_cr0())
 
 #endif	/* __KERNEL__ */
@@ -447,6 +467,8 @@ struct alt_instr {
 #define local_irq_enable()	__asm__ __volatile__("sti": : :"memory")
 /* used in the idle loop; sti takes one instruction cycle to complete */
 #define safe_halt()		__asm__ __volatile__("sti; hlt": : :"memory")
+/* used when interrupts are already enabled or to shutdown the processor */
+#define halt()			__asm__ __volatile__("hlt": : :"memory")
 
 #define irqs_disabled()			\
 ({					\

include/asm-i386/xor.h

@@ -535,14 +535,14 @@ static struct xor_block_template xor_block_p5_mmx = {
 
 #define XMMS_SAVE do {				\
 	preempt_disable();			\
+	cr0 = read_cr0();			\
+	clts();					\
 	__asm__ __volatile__ ( 			\
-		"movl %%cr0,%0		;\n\t"	\
-		"clts			;\n\t"	\
-		"movups %%xmm0,(%1)	;\n\t"	\
-		"movups %%xmm1,0x10(%1)	;\n\t"	\
-		"movups %%xmm2,0x20(%1)	;\n\t"	\
-		"movups %%xmm3,0x30(%1)	;\n\t"	\
-		: "=&r" (cr0)			\
+		"movups %%xmm0,(%0)	;\n\t"	\
+		"movups %%xmm1,0x10(%0)	;\n\t"	\
+		"movups %%xmm2,0x20(%0)	;\n\t"	\
+		"movups %%xmm3,0x30(%0)	;\n\t"	\
+		:				\
 		: "r" (xmm_save) 		\
 		: "memory");			\
 } while(0)
@@ -550,14 +550,14 @@ static struct xor_block_template xor_block_p5_mmx = {
 #define XMMS_RESTORE do {			\
 	__asm__ __volatile__ ( 			\
 		"sfence			;\n\t"	\
-		"movups (%1),%%xmm0	;\n\t"	\
-		"movups 0x10(%1),%%xmm1	;\n\t"	\
-		"movups 0x20(%1),%%xmm2	;\n\t"	\
-		"movups 0x30(%1),%%xmm3	;\n\t"	\
-		"movl 	%0,%%cr0	;\n\t"	\
+		"movups (%0),%%xmm0	;\n\t"	\
+		"movups 0x10(%0),%%xmm1	;\n\t"	\
+		"movups 0x20(%0),%%xmm2	;\n\t"	\
+		"movups 0x30(%0),%%xmm3	;\n\t"	\
 		:				\
-		: "r" (cr0), "r" (xmm_save)	\
+		: "r" (xmm_save)		\
 		: "memory");			\
+	write_cr0(cr0);				\
 	preempt_enable();			\
 } while(0)