dt-bindings: phy: qcom,sata-phy: convert to dtschema

Convert the bindings for the SATA PHY on both apq8064 and ipq806x from
the old text format to yaml.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240715130854.53501-2-rayyan.ansari@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Documentation/devicetree/bindings/phy/qcom,sata-phy.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sata-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SATA PHY Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description:
+  The Qualcomm SATA PHY describes on-chip SATA Physical layer controllers.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq806x-sata-phy
+      - qcom,apq8064-sata-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: cfg
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    sata_phy: sata-phy@1b400000 {
+        compatible = "qcom,ipq806x-sata-phy";
+        reg = <0x1b400000 0x200>;
+
+        clocks = <&gcc SATA_PHY_CFG_CLK>;
+        clock-names = "cfg";
+
+        #phy-cells = <0>;
+    };
+

Documentation/devicetree/bindings/phy/qcom-apq8064-sata-phy.txt

-Qualcomm APQ8064 SATA PHY Controller
-------------------------------------
-
-SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
-Each SATA PHY controller should have its own node.
-
-Required properties:
-- compatible: compatible list, contains "qcom,apq8064-sata-phy".
-- reg: offset and length of the SATA PHY register set;
-- #phy-cells: must be zero
-- clocks: a list of phandles and clock-specifier pairs, one for each entry in
-  clock-names.
-- clock-names: must be "cfg" for phy config clock.
-
-Example:
-	sata_phy: sata-phy@1b400000 {
-		compatible = "qcom,apq8064-sata-phy";
-		reg = <0x1b400000 0x200>;
-
-		clocks = <&gcc SATA_PHY_CFG_CLK>;
-		clock-names = "cfg";
-
-		#phy-cells = <0>;
-	};

Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt

-Qualcomm IPQ806x SATA PHY Controller
-------------------------------------
-
-SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
-Each SATA PHY controller should have its own node.
-
-Required properties:
-- compatible: compatible list, contains "qcom,ipq806x-sata-phy"
-- reg: offset and length of the SATA PHY register set;
-- #phy-cells: must be zero
-- clocks: must be exactly one entry
-- clock-names: must be "cfg"
-
-Example:
-	sata_phy: sata-phy@1b400000 {
-		compatible = "qcom,ipq806x-sata-phy";
-		reg = <0x1b400000 0x200>;
-
-		clocks = <&gcc SATA_PHY_CFG_CLK>;
-		clock-names = "cfg";
-
-		#phy-cells = <0>;
-	};