arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename

unit-address should not use a 0x prefix.
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230424173623.477577-2-nm@ti.comSigned-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi

@@ -212,7 +212,7 @@ wkup_pmx0: pinctrl@4301c000 {
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
-	wkup_pmx1: pinctrl@0x4301c038 {
+	wkup_pmx1: pinctrl@4301c038 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c038 0x00 0x8>;
@@ -221,7 +221,7 @@ wkup_pmx1: pinctrl@0x4301c038 {
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
-	wkup_pmx2: pinctrl@0x4301c068 {
+	wkup_pmx2: pinctrl@4301c068 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c068 0x00 0xec>;
@@ -230,7 +230,7 @@ wkup_pmx2: pinctrl@0x4301c068 {
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
-	wkup_pmx3: pinctrl@0x4301c174 {
+	wkup_pmx3: pinctrl@4301c174 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c174 0x00 0x20>;