ARM: dts: imx8mm-venice-gw{71xx,72xx,73xx}: fix OTG controller OC mode

The GW71xx, GW72xx and GW73xx boards have USB1 routed to a USB OTG
connectors and USB2 routed to a USB hub.

The OTG connector has a over-currently protection with an active-low
pin and the USB1 to HUB connection has no over-current protection (as
the HUB itself implements this for its downstream ports).

Add proper dt nodes to specify the over-current pin polarity for USB1
and disable over-current protection for USB2.

Fixes: 6f30b27c ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits")
Cc: stable@vger.kernel.org
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi

@@ -146,12 +146,14 @@ &uart3 {
 
 &usbotg1 {
 	dr_mode = "otg";
+	over-current-active-low;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 

arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi

@@ -211,12 +211,14 @@ &uart4 {
 
 &usbotg1 {
 	dr_mode = "otg";
+	over-current-active-low;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
 	dr_mode = "host";
+	disable-over-current;
 	vbus-supply = <&reg_usb_otg2_vbus>;
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi

@@ -238,12 +238,14 @@ &uart4 {
 
 &usbotg1 {
 	dr_mode = "otg";
+	over-current-active-low;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
 	dr_mode = "host";
+	disable-over-current;
 	vbus-supply = <&reg_usb_otg2_vbus>;
 	status = "okay";
 };