Commit 4c7ee8de authored by john stultz's avatar john stultz Committed by Linus Torvalds

[PATCH] NTP: Move all the NTP related code to ntp.c

Move all the NTP related code to ntp.c

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: default avatarJohn Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent c902e0a0
......@@ -294,11 +294,15 @@ extern void register_time_interpolator(struct time_interpolator *);
extern void unregister_time_interpolator(struct time_interpolator *);
extern void time_interpolator_reset(void);
extern unsigned long time_interpolator_get_offset(void);
extern void time_interpolator_update(long delta_nsec);
#else /* !CONFIG_TIME_INTERPOLATION */
static inline void
time_interpolator_reset(void)
static inline void time_interpolator_reset(void)
{
}
static inline void time_interpolator_update(long delta_nsec)
{
}
......@@ -309,6 +313,8 @@ time_interpolator_reset(void)
/* Returns how long ticks are at present, in ns / 2^(SHIFT_SCALE-10). */
extern u64 current_tick_length(void);
extern void second_overflow(void);
extern void update_ntp_one_tick(void);
extern int do_adjtimex(struct timex *);
#endif /* KERNEL */
......
......@@ -202,179 +202,6 @@ asmlinkage long sys_settimeofday(struct timeval __user *tv,
return do_sys_settimeofday(tv ? &new_ts : NULL, tz ? &new_tz : NULL);
}
/* we call this to notify the arch when the clock is being
* controlled. If no such arch routine, do nothing.
*/
void __attribute__ ((weak)) notify_arch_cmos_timer(void)
{
return;
}
/* adjtimex mainly allows reading (and writing, if superuser) of
* kernel time-keeping variables. used by xntpd.
*/
int do_adjtimex(struct timex *txc)
{
long ltemp, mtemp, save_adjust;
int result;
/* In order to modify anything, you gotta be super-user! */
if (txc->modes && !capable(CAP_SYS_TIME))
return -EPERM;
/* Now we validate the data before disabling interrupts */
if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
/* singleshot must not be used with any other mode bits */
if (txc->modes != ADJ_OFFSET_SINGLESHOT)
return -EINVAL;
if (txc->modes != ADJ_OFFSET_SINGLESHOT && (txc->modes & ADJ_OFFSET))
/* adjustment Offset limited to +- .512 seconds */
if (txc->offset <= - MAXPHASE || txc->offset >= MAXPHASE )
return -EINVAL;
/* if the quartz is off by more than 10% something is VERY wrong ! */
if (txc->modes & ADJ_TICK)
if (txc->tick < 900000/USER_HZ ||
txc->tick > 1100000/USER_HZ)
return -EINVAL;
write_seqlock_irq(&xtime_lock);
result = time_state; /* mostly `TIME_OK' */
/* Save for later - semantics of adjtime is to return old value */
save_adjust = time_next_adjust ? time_next_adjust : time_adjust;
#if 0 /* STA_CLOCKERR is never set yet */
time_status &= ~STA_CLOCKERR; /* reset STA_CLOCKERR */
#endif
/* If there are input parameters, then process them */
if (txc->modes)
{
if (txc->modes & ADJ_STATUS) /* only set allowed bits */
time_status = (txc->status & ~STA_RONLY) |
(time_status & STA_RONLY);
if (txc->modes & ADJ_FREQUENCY) { /* p. 22 */
if (txc->freq > MAXFREQ || txc->freq < -MAXFREQ) {
result = -EINVAL;
goto leave;
}
time_freq = txc->freq;
}
if (txc->modes & ADJ_MAXERROR) {
if (txc->maxerror < 0 || txc->maxerror >= NTP_PHASE_LIMIT) {
result = -EINVAL;
goto leave;
}
time_maxerror = txc->maxerror;
}
if (txc->modes & ADJ_ESTERROR) {
if (txc->esterror < 0 || txc->esterror >= NTP_PHASE_LIMIT) {
result = -EINVAL;
goto leave;
}
time_esterror = txc->esterror;
}
if (txc->modes & ADJ_TIMECONST) { /* p. 24 */
if (txc->constant < 0) { /* NTP v4 uses values > 6 */
result = -EINVAL;
goto leave;
}
time_constant = txc->constant;
}
if (txc->modes & ADJ_OFFSET) { /* values checked earlier */
if (txc->modes == ADJ_OFFSET_SINGLESHOT) {
/* adjtime() is independent from ntp_adjtime() */
if ((time_next_adjust = txc->offset) == 0)
time_adjust = 0;
}
else if (time_status & STA_PLL) {
ltemp = txc->offset;
/*
* Scale the phase adjustment and
* clamp to the operating range.
*/
if (ltemp > MAXPHASE)
time_offset = MAXPHASE << SHIFT_UPDATE;
else if (ltemp < -MAXPHASE)
time_offset = -(MAXPHASE << SHIFT_UPDATE);
else
time_offset = ltemp << SHIFT_UPDATE;
/*
* Select whether the frequency is to be controlled
* and in which mode (PLL or FLL). Clamp to the operating
* range. Ugly multiply/divide should be replaced someday.
*/
if (time_status & STA_FREQHOLD || time_reftime == 0)
time_reftime = xtime.tv_sec;
mtemp = xtime.tv_sec - time_reftime;
time_reftime = xtime.tv_sec;
if (time_status & STA_FLL) {
if (mtemp >= MINSEC) {
ltemp = (time_offset / mtemp) << (SHIFT_USEC -
SHIFT_UPDATE);
time_freq += shift_right(ltemp, SHIFT_KH);
} else /* calibration interval too short (p. 12) */
result = TIME_ERROR;
} else { /* PLL mode */
if (mtemp < MAXSEC) {
ltemp *= mtemp;
time_freq += shift_right(ltemp,(time_constant +
time_constant +
SHIFT_KF - SHIFT_USEC));
} else /* calibration interval too long (p. 12) */
result = TIME_ERROR;
}
time_freq = min(time_freq, time_tolerance);
time_freq = max(time_freq, -time_tolerance);
} /* STA_PLL */
} /* txc->modes & ADJ_OFFSET */
if (txc->modes & ADJ_TICK) {
tick_usec = txc->tick;
tick_nsec = TICK_USEC_TO_NSEC(tick_usec);
}
} /* txc->modes */
leave: if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
result = TIME_ERROR;
if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
txc->offset = save_adjust;
else {
txc->offset = shift_right(time_offset, SHIFT_UPDATE);
}
txc->freq = time_freq;
txc->maxerror = time_maxerror;
txc->esterror = time_esterror;
txc->status = time_status;
txc->constant = time_constant;
txc->precision = time_precision;
txc->tolerance = time_tolerance;
txc->tick = tick_usec;
/* PPS is not implemented, so these are zero */
txc->ppsfreq = 0;
txc->jitter = 0;
txc->shift = 0;
txc->stabil = 0;
txc->jitcnt = 0;
txc->calcnt = 0;
txc->errcnt = 0;
txc->stbcnt = 0;
write_sequnlock_irq(&xtime_lock);
do_gettimeofday(&txc->time);
notify_arch_cmos_timer();
return(result);
}
asmlinkage long sys_adjtimex(struct timex __user *txc_p)
{
struct timex txc; /* Local copy of parameter */
......
obj-y += clocksource.o jiffies.o
obj-y += ntp.o clocksource.o jiffies.o
This diff is collapsed.
......@@ -41,12 +41,6 @@
#include <asm/timex.h>
#include <asm/io.h>
#ifdef CONFIG_TIME_INTERPOLATION
static void time_interpolator_update(long delta_nsec);
#else
#define time_interpolator_update(x)
#endif
u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
EXPORT_SYMBOL(jiffies_64);
......@@ -587,209 +581,6 @@ struct timespec wall_to_monotonic __attribute__ ((aligned (16)));
EXPORT_SYMBOL(xtime);
/* Don't completely fail for HZ > 500. */
int tickadj = 500/HZ ? : 1; /* microsecs */
/*
* phase-lock loop variables
*/
/* TIME_ERROR prevents overwriting the CMOS clock */
int time_state = TIME_OK; /* clock synchronization status */
int time_status = STA_UNSYNC; /* clock status bits */
long time_offset; /* time adjustment (us) */
long time_constant = 2; /* pll time constant */
long time_tolerance = MAXFREQ; /* frequency tolerance (ppm) */
long time_precision = 1; /* clock precision (us) */
long time_maxerror = NTP_PHASE_LIMIT; /* maximum error (us) */
long time_esterror = NTP_PHASE_LIMIT; /* estimated error (us) */
long time_freq = (((NSEC_PER_SEC + HZ/2) % HZ - HZ/2) << SHIFT_USEC) / NSEC_PER_USEC;
/* frequency offset (scaled ppm)*/
static long time_adj; /* tick adjust (scaled 1 / HZ) */
long time_reftime; /* time at last adjustment (s) */
long time_adjust;
long time_next_adjust;
/*
* this routine handles the overflow of the microsecond field
*
* The tricky bits of code to handle the accurate clock support
* were provided by Dave Mills (Mills@UDEL.EDU) of NTP fame.
* They were originally developed for SUN and DEC kernels.
* All the kudos should go to Dave for this stuff.
*
*/
static void second_overflow(void)
{
long ltemp;
/* Bump the maxerror field */
time_maxerror += time_tolerance >> SHIFT_USEC;
if (time_maxerror > NTP_PHASE_LIMIT) {
time_maxerror = NTP_PHASE_LIMIT;
time_status |= STA_UNSYNC;
}
/*
* Leap second processing. If in leap-insert state at the end of the
* day, the system clock is set back one second; if in leap-delete
* state, the system clock is set ahead one second. The microtime()
* routine or external clock driver will insure that reported time is
* always monotonic. The ugly divides should be replaced.
*/
switch (time_state) {
case TIME_OK:
if (time_status & STA_INS)
time_state = TIME_INS;
else if (time_status & STA_DEL)
time_state = TIME_DEL;
break;
case TIME_INS:
if (xtime.tv_sec % 86400 == 0) {
xtime.tv_sec--;
wall_to_monotonic.tv_sec++;
/*
* The timer interpolator will make time change
* gradually instead of an immediate jump by one second
*/
time_interpolator_update(-NSEC_PER_SEC);
time_state = TIME_OOP;
clock_was_set();
printk(KERN_NOTICE "Clock: inserting leap second "
"23:59:60 UTC\n");
}
break;
case TIME_DEL:
if ((xtime.tv_sec + 1) % 86400 == 0) {
xtime.tv_sec++;
wall_to_monotonic.tv_sec--;
/*
* Use of time interpolator for a gradual change of
* time
*/
time_interpolator_update(NSEC_PER_SEC);
time_state = TIME_WAIT;
clock_was_set();
printk(KERN_NOTICE "Clock: deleting leap second "
"23:59:59 UTC\n");
}
break;
case TIME_OOP:
time_state = TIME_WAIT;
break;
case TIME_WAIT:
if (!(time_status & (STA_INS | STA_DEL)))
time_state = TIME_OK;
}
/*
* Compute the phase adjustment for the next second. In PLL mode, the
* offset is reduced by a fixed factor times the time constant. In FLL
* mode the offset is used directly. In either mode, the maximum phase
* adjustment for each second is clamped so as to spread the adjustment
* over not more than the number of seconds between updates.
*/
ltemp = time_offset;
if (!(time_status & STA_FLL))
ltemp = shift_right(ltemp, SHIFT_KG + time_constant);
ltemp = min(ltemp, (MAXPHASE / MINSEC) << SHIFT_UPDATE);
ltemp = max(ltemp, -(MAXPHASE / MINSEC) << SHIFT_UPDATE);
time_offset -= ltemp;
time_adj = ltemp << (SHIFT_SCALE - SHIFT_HZ - SHIFT_UPDATE);
/*
* Compute the frequency estimate and additional phase adjustment due
* to frequency error for the next second.
*/
ltemp = time_freq;
time_adj += shift_right(ltemp,(SHIFT_USEC + SHIFT_HZ - SHIFT_SCALE));
#if HZ == 100
/*
* Compensate for (HZ==100) != (1 << SHIFT_HZ). Add 25% and 3.125% to
* get 128.125; => only 0.125% error (p. 14)
*/
time_adj += shift_right(time_adj, 2) + shift_right(time_adj, 5);
#endif
#if HZ == 250
/*
* Compensate for (HZ==250) != (1 << SHIFT_HZ). Add 1.5625% and
* 0.78125% to get 255.85938; => only 0.05% error (p. 14)
*/
time_adj += shift_right(time_adj, 6) + shift_right(time_adj, 7);
#endif
#if HZ == 1000
/*
* Compensate for (HZ==1000) != (1 << SHIFT_HZ). Add 1.5625% and
* 0.78125% to get 1023.4375; => only 0.05% error (p. 14)
*/
time_adj += shift_right(time_adj, 6) + shift_right(time_adj, 7);
#endif
}
/*
* Returns how many microseconds we need to add to xtime this tick
* in doing an adjustment requested with adjtime.
*/
static long adjtime_adjustment(void)
{
long time_adjust_step;
time_adjust_step = time_adjust;
if (time_adjust_step) {
/*
* We are doing an adjtime thing. Prepare time_adjust_step to
* be within bounds. Note that a positive time_adjust means we
* want the clock to run faster.
*
* Limit the amount of the step to be in the range
* -tickadj .. +tickadj
*/
time_adjust_step = min(time_adjust_step, (long)tickadj);
time_adjust_step = max(time_adjust_step, (long)-tickadj);
}
return time_adjust_step;
}
/* in the NTP reference this is called "hardclock()" */
static void update_ntp_one_tick(void)
{
long time_adjust_step;
time_adjust_step = adjtime_adjustment();
if (time_adjust_step)
/* Reduce by this step the amount of time left */
time_adjust -= time_adjust_step;
/* Changes by adjtime() do not take effect till next tick. */
if (time_next_adjust != 0) {
time_adjust = time_next_adjust;
time_next_adjust = 0;
}
}
/*
* Return how long ticks are at the moment, that is, how much time
* update_wall_time_one_tick will add to xtime next time we call it
* (assuming no calls to do_adjtimex in the meantime).
* The return value is in fixed-point nanoseconds shifted by the
* specified number of bits to the right of the binary point.
* This function has no side-effects.
*/
u64 current_tick_length(void)
{
long delta_nsec;
u64 ret;
/* calculate the finest interval NTP will allow.
* ie: nanosecond value shifted by (SHIFT_SCALE - 10)
*/
delta_nsec = tick_nsec + adjtime_adjustment() * 1000;
ret = (u64)delta_nsec << TICK_LENGTH_SHIFT;
ret += (s64)time_adj << (TICK_LENGTH_SHIFT - (SHIFT_SCALE - 10));
return ret;
}
/* XXX - all of this timekeeping code should be later moved to time.c */
#include <linux/clocksource.h>
......@@ -1775,7 +1566,7 @@ unsigned long time_interpolator_get_offset(void)
#define INTERPOLATOR_ADJUST 65536
#define INTERPOLATOR_MAX_SKIP 10*INTERPOLATOR_ADJUST
static void time_interpolator_update(long delta_nsec)
void time_interpolator_update(long delta_nsec)
{
u64 counter;
unsigned long offset;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment