Commit 4cb54fa3 authored by Sujith Manoharan's avatar Sujith Manoharan Committed by John W. Linville

ath9k: Remove SC_OP_OFFCHANNEL

mac80211's IEEE80211_CONF_OFFCHANNEL can be used directly
to track offchannel state. Also pass the correct boolean
value to ath9k_hw_startpcureceive().
Signed-off-by: default avatarSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 2fd5d35b
......@@ -586,13 +586,12 @@ struct ath_ant_comb {
#define SC_OP_INVALID BIT(0)
#define SC_OP_BEACONS BIT(1)
#define SC_OP_OFFCHANNEL BIT(2)
#define SC_OP_RXFLUSH BIT(3)
#define SC_OP_TSF_RESET BIT(4)
#define SC_OP_BT_PRIORITY_DETECTED BIT(5)
#define SC_OP_BT_SCAN BIT(6)
#define SC_OP_ANI_RUN BIT(7)
#define SC_OP_PRIM_STA_VIF BIT(8)
#define SC_OP_RXFLUSH BIT(2)
#define SC_OP_TSF_RESET BIT(3)
#define SC_OP_BT_PRIORITY_DETECTED BIT(4)
#define SC_OP_BT_SCAN BIT(5)
#define SC_OP_ANI_RUN BIT(6)
#define SC_OP_PRIM_STA_VIF BIT(7)
/* Powersave flags */
#define PS_WAIT_FOR_BEACON BIT(0)
......
......@@ -152,7 +152,7 @@ void ath_start_ani(struct ath_common *common)
if (!(sc->sc_flags & SC_OP_ANI_RUN))
return;
if (sc->sc_flags & SC_OP_OFFCHANNEL)
if (sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
return;
common->ani.longcal_timer = timestamp;
......@@ -282,7 +282,7 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start)
ath9k_hw_set_interrupts(ah);
ath9k_hw_enable_interrupts(ah);
if (!(sc->sc_flags & (SC_OP_OFFCHANNEL)) && start) {
if (!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) && start) {
if (sc->sc_flags & SC_OP_BEACONS)
ath_set_beacon(sc);
......@@ -328,7 +328,7 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan,
spin_lock_bh(&sc->sc_pcu_lock);
if (!(sc->sc_flags & SC_OP_OFFCHANNEL)) {
if (!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) {
fastcc = false;
caldata = &sc->caldata;
}
......@@ -1626,11 +1626,6 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
if (ah->curchan)
old_pos = ah->curchan - &ah->channels[0];
if (hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
sc->sc_flags |= SC_OP_OFFCHANNEL;
else
sc->sc_flags &= ~SC_OP_OFFCHANNEL;
ath_dbg(common, CONFIG, "Set channel: %d MHz type: %d\n",
curchan->center_freq, conf->channel_type);
......
......@@ -303,7 +303,7 @@ static void ath_edma_start_recv(struct ath_softc *sc)
ath_opmode_init(sc);
ath9k_hw_startpcureceive(sc->sc_ah, (sc->sc_flags & SC_OP_OFFCHANNEL));
ath9k_hw_startpcureceive(sc->sc_ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL));
spin_unlock_bh(&sc->rx.rxbuflock);
}
......@@ -500,7 +500,7 @@ int ath_startrecv(struct ath_softc *sc)
start_recv:
ath_opmode_init(sc);
ath9k_hw_startpcureceive(ah, (sc->sc_flags & SC_OP_OFFCHANNEL));
ath9k_hw_startpcureceive(ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL));
spin_unlock_bh(&sc->rx.rxbuflock);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment