ARM: dts: ixp4xx: Add ethernet

This adds ethernet to the IXP4xx device trees.

Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts

@@ -106,4 +106,23 @@ partitions {
 			fis-index-block = <0x3f>;
 		};
 	};
+
+	soc {
+		ethernet@c8009000 {
+			status = "ok";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
 };

arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts

@@ -91,4 +91,23 @@ partitions {
 			fis-index-block = <0xff>;
 		};
 	};
+
+	soc {
+		ethernet@c800a000 {
+			status = "ok";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
 };

arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi

@@ -30,5 +30,49 @@ i2c@c8011000 {
 			interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
+
+		/* This is known as EthA */
+		ethernet@c800c000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800c000 0x1000>;
+			status = "disabled";
+			intel,npe = <0>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
+
+		/* This is known as EthB1 */
+		ethernet@c800d000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800d000 0x1000>;
+			status = "disabled";
+			intel,npe = <1>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
+
+		/* This is known as EthB2 */
+		ethernet@c800e000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800e000 0x1000>;
+			status = "disabled";
+			intel,npe = <2>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
+
+		/* This is known as EthB3 */
+		ethernet@c800f000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800f000 0x1000>;
+			status = "disabled";
+			intel,npe = <3>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
 	};
 };

arch/arm/boot/dts/intel-ixp4xx.dtsi

@@ -61,9 +61,31 @@ timer@c8005000 {
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		npe@c8006000 {
+		npe: npe@c8006000 {
 			compatible = "intel,ixp4xx-network-processing-engine";
 			reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
 		};
+
+		/* This is known as EthB */
+		ethernet@c8009000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc8009000 0x1000>;
+			status = "disabled";
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			intel,npe-handle = <&npe 1>;
+		};
+
+		/* This is known as EthC */
+		ethernet@c800a000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800a000 0x1000>;
+			status = "disabled";
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+			intel,npe-handle = <&npe 2>;
+		};
 	};
 };