Commit 4d0dd6c1 authored by Srinivas Pandruvada's avatar Srinivas Pandruvada Committed by Zhang Rui

Thermal/int340x/processor_thermal: Enable auxiliary DTS for Braswell

Support two auxiliary DTS present on Braswell platform using side band
IOSF interface. This supports two read write trips, which can be used
to get notification on trip violation.
Signed-off-by: default avatarSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
parent 3a2419f8
...@@ -278,6 +278,7 @@ config INT340X_THERMAL ...@@ -278,6 +278,7 @@ config INT340X_THERMAL
select THERMAL_GOV_USER_SPACE select THERMAL_GOV_USER_SPACE
select ACPI_THERMAL_REL select ACPI_THERMAL_REL
select ACPI_FAN select ACPI_FAN
select INTEL_SOC_DTS_IOSF_CORE
help help
Newer laptops and tablets that use ACPI may have thermal sensors and Newer laptops and tablets that use ACPI may have thermal sensors and
other devices with thermal control capabilities outside the core other devices with thermal control capabilities outside the core
......
...@@ -16,10 +16,12 @@ ...@@ -16,10 +16,12 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/acpi.h> #include <linux/acpi.h>
#include <linux/thermal.h> #include <linux/thermal.h>
#include "int340x_thermal_zone.h" #include "int340x_thermal_zone.h"
#include "../intel_soc_dts_iosf.h"
/* Broadwell-U/HSB thermal reporting device */ /* Broadwell-U/HSB thermal reporting device */
#define PCI_DEVICE_ID_PROC_BDW_THERMAL 0x1603 #define PCI_DEVICE_ID_PROC_BDW_THERMAL 0x1603
...@@ -42,6 +44,7 @@ struct proc_thermal_device { ...@@ -42,6 +44,7 @@ struct proc_thermal_device {
struct acpi_device *adev; struct acpi_device *adev;
struct power_config power_limits[2]; struct power_config power_limits[2];
struct int34x_thermal_zone *int340x_zone; struct int34x_thermal_zone *int340x_zone;
struct intel_soc_dts_sensors *soc_dts;
}; };
enum proc_thermal_emum_mode_type { enum proc_thermal_emum_mode_type {
...@@ -308,6 +311,18 @@ static int int3401_remove(struct platform_device *pdev) ...@@ -308,6 +311,18 @@ static int int3401_remove(struct platform_device *pdev)
return 0; return 0;
} }
static irqreturn_t proc_thermal_pci_msi_irq(int irq, void *devid)
{
struct proc_thermal_device *proc_priv;
struct pci_dev *pdev = devid;
proc_priv = pci_get_drvdata(pdev);
intel_soc_dts_iosf_interrupt_handler(proc_priv->soc_dts);
return IRQ_HANDLED;
}
static int proc_thermal_pci_probe(struct pci_dev *pdev, static int proc_thermal_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *unused) const struct pci_device_id *unused)
{ {
...@@ -334,12 +349,50 @@ static int proc_thermal_pci_probe(struct pci_dev *pdev, ...@@ -334,12 +349,50 @@ static int proc_thermal_pci_probe(struct pci_dev *pdev,
pci_set_drvdata(pdev, proc_priv); pci_set_drvdata(pdev, proc_priv);
proc_thermal_emum_mode = PROC_THERMAL_PCI; proc_thermal_emum_mode = PROC_THERMAL_PCI;
if (pdev->device == PCI_DEVICE_ID_PROC_BSW_THERMAL) {
/*
* Enumerate additional DTS sensors available via IOSF.
* But we are not treating as a failure condition, if
* there are no aux DTSs enabled or fails. This driver
* already exposes sensors, which can be accessed via
* ACPI/MSR. So we don't want to fail for auxiliary DTSs.
*/
proc_priv->soc_dts = intel_soc_dts_iosf_init(
INTEL_SOC_DTS_INTERRUPT_MSI, 2, 0);
if (proc_priv->soc_dts && pdev->irq) {
ret = pci_enable_msi(pdev);
if (!ret) {
ret = request_threaded_irq(pdev->irq, NULL,
proc_thermal_pci_msi_irq,
IRQF_ONESHOT, "proc_thermal",
pdev);
if (ret) {
intel_soc_dts_iosf_exit(
proc_priv->soc_dts);
pci_disable_msi(pdev);
proc_priv->soc_dts = NULL;
}
}
} else
dev_err(&pdev->dev, "No auxiliary DTSs enabled\n");
}
return 0; return 0;
} }
static void proc_thermal_pci_remove(struct pci_dev *pdev) static void proc_thermal_pci_remove(struct pci_dev *pdev)
{ {
proc_thermal_remove(pci_get_drvdata(pdev)); struct proc_thermal_device *proc_priv = pci_get_drvdata(pdev);
if (proc_priv->soc_dts) {
intel_soc_dts_iosf_exit(proc_priv->soc_dts);
if (pdev->irq) {
free_irq(pdev->irq, pdev);
pci_disable_msi(pdev);
}
}
proc_thermal_remove(proc_priv);
pci_disable_device(pdev); pci_disable_device(pdev);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment