Commit 4d17d083 authored by Markus Rechberger's avatar Markus Rechberger Committed by Mauro Carvalho Chehab

V4L/DVB (3276): Added terratec hybrid xs and kworld 2800rf support

- Added terratec hybrid xs product/vendorid
- Added gpio audio initialization for kworld pvr 2800rf
Signed-off-by: default avatarMarkus Rechberger <mrechberger@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent f7d66e82
......@@ -8,3 +8,4 @@
7 -> Leadtek Winfast USB II (em2800)
8 -> Kworld USB2800 (em2800)
9 -> Pinnacle Dazzle DVC 90 (em2820/em2840) [2304:0207]
12 -> Unknown EM2820/2840 video grabber (em2820/em2840)
......@@ -72,6 +72,24 @@ struct em28xx_board em28xx_boards[] = {
.amux = 1,
}},
},
[EM2820_BOARD_KWORLD_PVRTV2800RF] = {
.name = "Unknown EM2820/2840 video grabber",
.is_em2800 = 0,
.vchannels = 2,
.norm = VIDEO_MODE_PAL,
.tda9887_conf = TDA9887_PRESENT,
.has_tuner = 1,
.decoder = EM28XX_SAA7113,
.input = {{
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = 1,
},{
.type = EM28XX_VMUX_SVIDEO,
.vmux = 9,
.amux = 1,
}},
},
[EM2820_BOARD_TERRATEC_CINERGY_250] = {
.name = "Terratec Cinergy 250 USB",
.vchannels = 3,
......@@ -136,8 +154,30 @@ struct em28xx_board em28xx_boards[] = {
.amux = 1,
}},
},
[EM2880_BOARD_WINTV_HVR_900] = {
.name = "WinTV HVR 900",
[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
.name = "Hauppauge WinTV HVR 900",
.vchannels = 3,
.norm = VIDEO_MODE_PAL,
.has_tuner = 0,
.tda9887_conf = TDA9887_PRESENT,
.has_tuner = 1,
.decoder = EM28XX_TVP5150,
.input = {{
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 2,
.amux = 0,
},{
.type = EM28XX_VMUX_TELEVISION,
.vmux = 0,
.amux = 1,
},{
.type = EM28XX_VMUX_SVIDEO,
.vmux = 9,
.amux = 1,
}},
},
[EM2880_BOARD_TERRATEC_HYBRID_XS] = {
.name = "Terratec Hybrid XS",
.vchannels = 3,
.norm = VIDEO_MODE_PAL,
.has_tuner = 0,
......@@ -276,7 +316,8 @@ struct usb_device_id em28xx_id_table [] = {
{ USB_DEVICE(0x2304, 0x0208), .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
{ USB_DEVICE(0x2040, 0x4200), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
{ USB_DEVICE(0x2304, 0x0207), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ USB_DEVICE(0x2040, 0x6500), .driver_info = EM2880_BOARD_WINTV_HVR_900 },
{ USB_DEVICE(0x2040, 0x6500), .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
{ USB_DEVICE(0x0ccd, 0x0042), .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
{ },
};
......@@ -284,7 +325,8 @@ void em28xx_pre_card_setup(struct em28xx *dev)
{
/* request some modules */
switch(dev->model){
case EM2880_BOARD_WINTV_HVR_900:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
case EM2880_BOARD_TERRATEC_HYBRID_XS:
{
em28xx_write_regs_req(dev, 0x00, 0x08, "\x7d", 1); // reset through GPIO?
break;
......@@ -317,6 +359,12 @@ void em28xx_card_setup(struct em28xx *dev)
dev->has_msp34xx=0;
break;
}
case EM2820_BOARD_KWORLD_PVRTV2800RF:
{
em28xx_write_regs_req(dev,0x00,0x08, "\xf9", 1); // GPIO enables sound on KWORLD PVR TV 2800RF
break;
}
}
}
......
......@@ -41,7 +41,9 @@
#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7
#define EM2800_BOARD_KWORLD_USB2800 8
#define EM2820_BOARD_PINNACLE_DVC_90 9
#define EM2880_BOARD_WINTV_HVR_900 10
#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 10
#define EM2880_BOARD_TERRATEC_HYBRID_XS 11
#define EM2820_BOARD_KWORLD_PVRTV2800RF 12
#define UNSET -1
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment