Commit 4d5675c3 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Greg Kroah-Hartman

serial: 8250_dw: switch to use 8250_dwlib library

Since we have a common library module for Synopsys DesignWare UART,
let us use it.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: default avatarHeikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20190806094322.64987-4-andriy.shevchenko@linux.intel.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 136e0ab9
......@@ -27,66 +27,36 @@
#include <asm/byteorder.h>
#include "8250.h"
#include "8250_dwlib.h"
/* Offsets for the DesignWare specific registers */
#define DW_UART_USR 0x1f /* UART Status Register */
#define DW_UART_DLF 0xc0 /* Divisor Latch Fraction Register */
#define DW_UART_CPR 0xf4 /* Component Parameter Register */
#define DW_UART_UCV 0xf8 /* UART Component Version */
/* Component Parameter Register bits */
#define DW_UART_CPR_ABP_DATA_WIDTH (3 << 0)
#define DW_UART_CPR_AFCE_MODE (1 << 4)
#define DW_UART_CPR_THRE_MODE (1 << 5)
#define DW_UART_CPR_SIR_MODE (1 << 6)
#define DW_UART_CPR_SIR_LP_MODE (1 << 7)
#define DW_UART_CPR_ADDITIONAL_FEATURES (1 << 8)
#define DW_UART_CPR_FIFO_ACCESS (1 << 9)
#define DW_UART_CPR_FIFO_STAT (1 << 10)
#define DW_UART_CPR_SHADOW (1 << 11)
#define DW_UART_CPR_ENCODED_PARMS (1 << 12)
#define DW_UART_CPR_DMA_EXTRA (1 << 13)
#define DW_UART_CPR_FIFO_MODE (0xff << 16)
/* Helper for fifo size calculation */
#define DW_UART_CPR_FIFO_SIZE(a) (((a >> 16) & 0xff) * 16)
/* DesignWare specific register fields */
#define DW_UART_MCR_SIRE BIT(6)
struct dw8250_data {
struct dw8250_port_data data;
u8 usr_reg;
u8 dlf_size;
int line;
int msr_mask_on;
int msr_mask_off;
struct clk *clk;
struct clk *pclk;
struct reset_control *rst;
struct uart_8250_dma dma;
unsigned int skip_autocfg:1;
unsigned int uart_16550_compatible:1;
};
static inline u32 dw8250_readl_ext(struct uart_port *p, int offset)
static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data)
{
if (p->iotype == UPIO_MEM32BE)
return ioread32be(p->membase + offset);
return readl(p->membase + offset);
}
static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg)
{
if (p->iotype == UPIO_MEM32BE)
iowrite32be(reg, p->membase + offset);
else
writel(reg, p->membase + offset);
return container_of(data, struct dw8250_data, data);
}
static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
struct dw8250_data *d = to_dw8250_data(p->private_data);
/* Override any modem control signals if needed */
if (offset == UART_MSR) {
......@@ -160,7 +130,7 @@ static void dw8250_tx_wait_empty(struct uart_port *p)
static void dw8250_serial_out38x(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
struct dw8250_data *d = to_dw8250_data(p->private_data);
/* Allow the TX to drain before we reconfigure */
if (offset == UART_LCR)
......@@ -175,7 +145,7 @@ static void dw8250_serial_out38x(struct uart_port *p, int offset, int value)
static void dw8250_serial_out(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
struct dw8250_data *d = to_dw8250_data(p->private_data);
writeb(value, p->membase + (offset << p->regshift));
......@@ -202,7 +172,7 @@ static unsigned int dw8250_serial_inq(struct uart_port *p, int offset)
static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
struct dw8250_data *d = to_dw8250_data(p->private_data);
value &= 0xff;
__raw_writeq(value, p->membase + (offset << p->regshift));
......@@ -216,7 +186,7 @@ static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
struct dw8250_data *d = to_dw8250_data(p->private_data);
writel(value, p->membase + (offset << p->regshift));
......@@ -233,7 +203,7 @@ static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
static void dw8250_serial_out32be(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
struct dw8250_data *d = to_dw8250_data(p->private_data);
iowrite32be(value, p->membase + (offset << p->regshift));
......@@ -252,7 +222,7 @@ static unsigned int dw8250_serial_in32be(struct uart_port *p, int offset)
static int dw8250_handle_irq(struct uart_port *p)
{
struct uart_8250_port *up = up_to_u8250p(p);
struct dw8250_data *d = p->private_data;
struct dw8250_data *d = to_dw8250_data(p->private_data);
unsigned int iir = p->serial_in(p, UART_IIR);
unsigned int status;
unsigned long flags;
......@@ -306,7 +276,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
struct ktermios *old)
{
unsigned int baud = tty_termios_baud_rate(termios);
struct dw8250_data *d = p->private_data;
struct dw8250_data *d = to_dw8250_data(p->private_data);
long rate;
int ret;
......@@ -368,37 +338,6 @@ static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
return param == chan->device->dev;
}
/*
* divisor = div(I) + div(F)
* "I" means integer, "F" means fractional
* quot = div(I) = clk / (16 * baud)
* frac = div(F) * 2^dlf_size
*
* let rem = clk % (16 * baud)
* we have: div(F) * (16 * baud) = rem
* so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud)
*/
static unsigned int dw8250_get_divisor(struct uart_port *p,
unsigned int baud,
unsigned int *frac)
{
unsigned int quot, rem, base_baud = baud * 16;
struct dw8250_data *d = p->private_data;
quot = p->uartclk / base_baud;
rem = p->uartclk % base_baud;
*frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, base_baud);
return quot;
}
static void dw8250_set_divisor(struct uart_port *p, unsigned int baud,
unsigned int quot, unsigned int quot_frac)
{
dw8250_writel_ext(p, DW_UART_DLF, quot_frac);
serial8250_do_set_divisor(p, baud, quot, quot_frac);
}
static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
{
if (p->dev->of_node) {
......@@ -437,59 +376,12 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
/* Platforms with iDMA 64-bit */
if (platform_get_resource_byname(to_platform_device(p->dev),
IORESOURCE_MEM, "lpss_priv")) {
data->dma.rx_param = p->dev->parent;
data->dma.tx_param = p->dev->parent;
data->dma.fn = dw8250_idma_filter;
data->data.dma.rx_param = p->dev->parent;
data->data.dma.tx_param = p->dev->parent;
data->data.dma.fn = dw8250_idma_filter;
}
}
static void dw8250_setup_port(struct uart_port *p)
{
struct uart_8250_port *up = up_to_u8250p(p);
u32 reg;
/*
* If the Component Version Register returns zero, we know that
* ADDITIONAL_FEATURES are not enabled. No need to go any further.
*/
reg = dw8250_readl_ext(p, DW_UART_UCV);
if (!reg)
return;
dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
dw8250_writel_ext(p, DW_UART_DLF, ~0U);
reg = dw8250_readl_ext(p, DW_UART_DLF);
dw8250_writel_ext(p, DW_UART_DLF, 0);
if (reg) {
struct dw8250_data *d = p->private_data;
d->dlf_size = fls(reg);
p->get_divisor = dw8250_get_divisor;
p->set_divisor = dw8250_set_divisor;
}
reg = dw8250_readl_ext(p, DW_UART_CPR);
if (!reg)
return;
/* Select the type based on fifo */
if (reg & DW_UART_CPR_FIFO_MODE) {
p->type = PORT_16550A;
p->flags |= UPF_FIXED_TYPE;
p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
up->capabilities = UART_CAP_FIFO;
}
if (reg & DW_UART_CPR_AFCE_MODE)
up->capabilities |= UART_CAP_AFE;
if (reg & DW_UART_CPR_SIR_MODE)
up->capabilities |= UART_CAP_IRDA;
}
static int dw8250_probe(struct platform_device *pdev)
{
struct uart_8250_port uart = {}, *up = &uart;
......@@ -534,9 +426,9 @@ static int dw8250_probe(struct platform_device *pdev)
if (!data)
return -ENOMEM;
data->dma.fn = dw8250_fallback_dma_filter;
data->data.dma.fn = dw8250_fallback_dma_filter;
data->usr_reg = DW_UART_USR;
p->private_data = data;
p->private_data = &data->data;
data->uart_16550_compatible = device_property_read_bool(dev,
"snps,uart-16550-compatible");
......@@ -632,14 +524,14 @@ static int dw8250_probe(struct platform_device *pdev)
/* If we have a valid fifosize, try hooking up DMA */
if (p->fifosize) {
data->dma.rxconf.src_maxburst = p->fifosize / 4;
data->dma.txconf.dst_maxburst = p->fifosize / 4;
up->dma = &data->dma;
data->data.dma.rxconf.src_maxburst = p->fifosize / 4;
data->data.dma.txconf.dst_maxburst = p->fifosize / 4;
up->dma = &data->data.dma;
}
data->line = serial8250_register_8250_port(up);
if (data->line < 0) {
err = data->line;
data->data.line = serial8250_register_8250_port(up);
if (data->data.line < 0) {
err = data->data.line;
goto err_reset;
}
......@@ -671,7 +563,7 @@ static int dw8250_remove(struct platform_device *pdev)
pm_runtime_get_sync(dev);
serial8250_unregister_port(data->line);
serial8250_unregister_port(data->data.line);
reset_control_assert(data->rst);
......@@ -692,7 +584,7 @@ static int dw8250_suspend(struct device *dev)
{
struct dw8250_data *data = dev_get_drvdata(dev);
serial8250_suspend_port(data->line);
serial8250_suspend_port(data->data.line);
return 0;
}
......@@ -701,7 +593,7 @@ static int dw8250_resume(struct device *dev)
{
struct dw8250_data *data = dev_get_drvdata(dev);
serial8250_resume_port(data->line);
serial8250_resume_port(data->data.line);
return 0;
}
......
......@@ -357,6 +357,7 @@ config SERIAL_8250_FSL
config SERIAL_8250_DW
tristate "Support for Synopsys DesignWare 8250 quirks"
depends on SERIAL_8250
select SERIAL_8250_DWLIB
help
Selecting this option will enable handling of the extra features
present in the Synopsys DesignWare APB UART.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment