serial: 8250_dw: switch to use 8250_dwlib library

Since we have a common library module for Synopsys DesignWare UART,
let us use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20190806094322.64987-4-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/8250/8250_dw.c

@@ -27,66 +27,36 @@
 
 #include <asm/byteorder.h>
 
-#include "8250.h"
+#include "8250_dwlib.h"
 
 /* Offsets for the DesignWare specific registers */
 #define DW_UART_USR	0x1f /* UART Status Register */
-#define DW_UART_DLF	0xc0 /* Divisor Latch Fraction Register */
-#define DW_UART_CPR	0xf4 /* Component Parameter Register */
-#define DW_UART_UCV	0xf8 /* UART Component Version */
-
-/* Component Parameter Register bits */
-#define DW_UART_CPR_ABP_DATA_WIDTH	(3 << 0)
-#define DW_UART_CPR_AFCE_MODE		(1 << 4)
-#define DW_UART_CPR_THRE_MODE		(1 << 5)
-#define DW_UART_CPR_SIR_MODE		(1 << 6)
-#define DW_UART_CPR_SIR_LP_MODE		(1 << 7)
-#define DW_UART_CPR_ADDITIONAL_FEATURES	(1 << 8)
-#define DW_UART_CPR_FIFO_ACCESS		(1 << 9)
-#define DW_UART_CPR_FIFO_STAT		(1 << 10)
-#define DW_UART_CPR_SHADOW		(1 << 11)
-#define DW_UART_CPR_ENCODED_PARMS	(1 << 12)
-#define DW_UART_CPR_DMA_EXTRA		(1 << 13)
-#define DW_UART_CPR_FIFO_MODE		(0xff << 16)
-/* Helper for fifo size calculation */
-#define DW_UART_CPR_FIFO_SIZE(a)	(((a >> 16) & 0xff) * 16)
 
 /* DesignWare specific register fields */
 #define DW_UART_MCR_SIRE		BIT(6)
 
 struct dw8250_data {
+	struct dw8250_port_data	data;
+
 	u8			usr_reg;
-	u8			dlf_size;
-	int			line;
 	int			msr_mask_on;
 	int			msr_mask_off;
 	struct clk		*clk;
 	struct clk		*pclk;
 	struct reset_control	*rst;
-	struct uart_8250_dma	dma;
 
 	unsigned int		skip_autocfg:1;
 	unsigned int		uart_16550_compatible:1;
 };
 
-static inline u32 dw8250_readl_ext(struct uart_port *p, int offset)
+static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data)
 {
-	if (p->iotype == UPIO_MEM32BE)
-		return ioread32be(p->membase + offset);
-	return readl(p->membase + offset);
-}
-
-static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg)
-{
-	if (p->iotype == UPIO_MEM32BE)
-		iowrite32be(reg, p->membase + offset);
-	else
-		writel(reg, p->membase + offset);
+	return container_of(data, struct dw8250_data, data);
 }
 
 static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
 {
-	struct dw8250_data *d = p->private_data;
+	struct dw8250_data *d = to_dw8250_data(p->private_data);
 
 	/* Override any modem control signals if needed */
 	if (offset == UART_MSR) {
@@ -160,7 +130,7 @@ static void dw8250_tx_wait_empty(struct uart_port *p)
 
 static void dw8250_serial_out38x(struct uart_port *p, int offset, int value)
 {
-	struct dw8250_data *d = p->private_data;
+	struct dw8250_data *d = to_dw8250_data(p->private_data);
 
 	/* Allow the TX to drain before we reconfigure */
 	if (offset == UART_LCR)
@@ -175,7 +145,7 @@ static void dw8250_serial_out38x(struct uart_port *p, int offset, int value)
 
 static void dw8250_serial_out(struct uart_port *p, int offset, int value)
 {
-	struct dw8250_data *d = p->private_data;
+	struct dw8250_data *d = to_dw8250_data(p->private_data);
 
 	writeb(value, p->membase + (offset << p->regshift));
 
@@ -202,7 +172,7 @@ static unsigned int dw8250_serial_inq(struct uart_port *p, int offset)
 
 static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
 {
-	struct dw8250_data *d = p->private_data;
+	struct dw8250_data *d = to_dw8250_data(p->private_data);
 
 	value &= 0xff;
 	__raw_writeq(value, p->membase + (offset << p->regshift));
@@ -216,7 +186,7 @@ static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
 
 static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
 {
-	struct dw8250_data *d = p->private_data;
+	struct dw8250_data *d = to_dw8250_data(p->private_data);
 
 	writel(value, p->membase + (offset << p->regshift));
 
@@ -233,7 +203,7 @@ static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
 
 static void dw8250_serial_out32be(struct uart_port *p, int offset, int value)
 {
-	struct dw8250_data *d = p->private_data;
+	struct dw8250_data *d = to_dw8250_data(p->private_data);
 
 	iowrite32be(value, p->membase + (offset << p->regshift));
 
@@ -252,7 +222,7 @@ static unsigned int dw8250_serial_in32be(struct uart_port *p, int offset)
 static int dw8250_handle_irq(struct uart_port *p)
 {
 	struct uart_8250_port *up = up_to_u8250p(p);
-	struct dw8250_data *d = p->private_data;
+	struct dw8250_data *d = to_dw8250_data(p->private_data);
 	unsigned int iir = p->serial_in(p, UART_IIR);
 	unsigned int status;
 	unsigned long flags;
@@ -306,7 +276,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
 			       struct ktermios *old)
 {
 	unsigned int baud = tty_termios_baud_rate(termios);
-	struct dw8250_data *d = p->private_data;
+	struct dw8250_data *d = to_dw8250_data(p->private_data);
 	long rate;
 	int ret;
 
@@ -368,37 +338,6 @@ static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
 	return param == chan->device->dev;
 }
 
-/*
- * divisor = div(I) + div(F)
- * "I" means integer, "F" means fractional
- * quot = div(I) = clk / (16 * baud)
- * frac = div(F) * 2^dlf_size
- *
- * let rem = clk % (16 * baud)
- * we have: div(F) * (16 * baud) = rem
- * so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud)
- */
-static unsigned int dw8250_get_divisor(struct uart_port *p,
-				       unsigned int baud,
-				       unsigned int *frac)
-{
-	unsigned int quot, rem, base_baud = baud * 16;
-	struct dw8250_data *d = p->private_data;
-
-	quot = p->uartclk / base_baud;
-	rem = p->uartclk % base_baud;
-	*frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, base_baud);
-
-	return quot;
-}
-
-static void dw8250_set_divisor(struct uart_port *p, unsigned int baud,
-			       unsigned int quot, unsigned int quot_frac)
-{
-	dw8250_writel_ext(p, DW_UART_DLF, quot_frac);
-	serial8250_do_set_divisor(p, baud, quot, quot_frac);
-}
-
 static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 {
 	if (p->dev->of_node) {
@@ -437,59 +376,12 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 	/* Platforms with iDMA 64-bit */
 	if (platform_get_resource_byname(to_platform_device(p->dev),
 					 IORESOURCE_MEM, "lpss_priv")) {
-		data->dma.rx_param = p->dev->parent;
-		data->dma.tx_param = p->dev->parent;
-		data->dma.fn = dw8250_idma_filter;
+		data->data.dma.rx_param = p->dev->parent;
+		data->data.dma.tx_param = p->dev->parent;
+		data->data.dma.fn = dw8250_idma_filter;
 	}
 }
 
-static void dw8250_setup_port(struct uart_port *p)
-{
-	struct uart_8250_port *up = up_to_u8250p(p);
-	u32 reg;
-
-	/*
-	 * If the Component Version Register returns zero, we know that
-	 * ADDITIONAL_FEATURES are not enabled. No need to go any further.
-	 */
-	reg = dw8250_readl_ext(p, DW_UART_UCV);
-	if (!reg)
-		return;
-
-	dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
-		(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
-
-	dw8250_writel_ext(p, DW_UART_DLF, ~0U);
-	reg = dw8250_readl_ext(p, DW_UART_DLF);
-	dw8250_writel_ext(p, DW_UART_DLF, 0);
-
-	if (reg) {
-		struct dw8250_data *d = p->private_data;
-
-		d->dlf_size = fls(reg);
-		p->get_divisor = dw8250_get_divisor;
-		p->set_divisor = dw8250_set_divisor;
-	}
-
-	reg = dw8250_readl_ext(p, DW_UART_CPR);
-	if (!reg)
-		return;
-
-	/* Select the type based on fifo */
-	if (reg & DW_UART_CPR_FIFO_MODE) {
-		p->type = PORT_16550A;
-		p->flags |= UPF_FIXED_TYPE;
-		p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
-		up->capabilities = UART_CAP_FIFO;
-	}
-
-	if (reg & DW_UART_CPR_AFCE_MODE)
-		up->capabilities |= UART_CAP_AFE;
-
-	if (reg & DW_UART_CPR_SIR_MODE)
-		up->capabilities |= UART_CAP_IRDA;
-}
-
 static int dw8250_probe(struct platform_device *pdev)
 {
 	struct uart_8250_port uart = {}, *up = &uart;
@@ -534,9 +426,9 @@ static int dw8250_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENOMEM;
 
-	data->dma.fn = dw8250_fallback_dma_filter;
+	data->data.dma.fn = dw8250_fallback_dma_filter;
 	data->usr_reg = DW_UART_USR;
-	p->private_data = data;
+	p->private_data = &data->data;
 
 	data->uart_16550_compatible = device_property_read_bool(dev,
 						"snps,uart-16550-compatible");
@@ -632,14 +524,14 @@ static int dw8250_probe(struct platform_device *pdev)
 
 	/* If we have a valid fifosize, try hooking up DMA */
 	if (p->fifosize) {
-		data->dma.rxconf.src_maxburst = p->fifosize / 4;
-		data->dma.txconf.dst_maxburst = p->fifosize / 4;
-		up->dma = &data->dma;
+		data->data.dma.rxconf.src_maxburst = p->fifosize / 4;
+		data->data.dma.txconf.dst_maxburst = p->fifosize / 4;
+		up->dma = &data->data.dma;
 	}
 
-	data->line = serial8250_register_8250_port(up);
-	if (data->line < 0) {
-		err = data->line;
+	data->data.line = serial8250_register_8250_port(up);
+	if (data->data.line < 0) {
+		err = data->data.line;
 		goto err_reset;
 	}
 
@@ -671,7 +563,7 @@ static int dw8250_remove(struct platform_device *pdev)
 
 	pm_runtime_get_sync(dev);
 
-	serial8250_unregister_port(data->line);
+	serial8250_unregister_port(data->data.line);
 
 	reset_control_assert(data->rst);
 
@@ -692,7 +584,7 @@ static int dw8250_suspend(struct device *dev)
 {
 	struct dw8250_data *data = dev_get_drvdata(dev);
 
-	serial8250_suspend_port(data->line);
+	serial8250_suspend_port(data->data.line);
 
 	return 0;
 }
@@ -701,7 +593,7 @@ static int dw8250_resume(struct device *dev)
 {
 	struct dw8250_data *data = dev_get_drvdata(dev);
 
-	serial8250_resume_port(data->line);
+	serial8250_resume_port(data->data.line);
 
 	return 0;
 }

drivers/tty/serial/8250/Kconfig

@@ -357,6 +357,7 @@ config SERIAL_8250_FSL
 config SERIAL_8250_DW
 	tristate "Support for Synopsys DesignWare 8250 quirks"
 	depends on SERIAL_8250
+	select SERIAL_8250_DWLIB
 	help
 	  Selecting this option will enable handling of the extra features
 	  present in the Synopsys DesignWare APB UART.