ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output

xdma_event_intr1.clkout2 pad can be used to source clock
from either 32K OSC or any of the PLL (except MPU) outputs.
On the existing AM335x based boards (EVM, EVM-SK and Bone),
this pad is used to feed the clock to audio codes.

So, this patch configures the pinmux to get clkout2 on the pad.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>

arch/arm/boot/dts/am335x-bone.dts

@@ -26,7 +26,7 @@ memory {
 
 	am33xx_pinmux: pinmux@44e10800 {
 		pinctrl-names = "default";
-		pinctrl-0 = <>;
+		pinctrl-0 = <&clkout2_pin>;
 
 		user_leds_s0: user_leds_s0 {
 			pinctrl-single,pins = <
@@ -50,6 +50,12 @@ uart0_pins: pinmux_uart0_pins {
 				0x174 0x00	/* uart0_txd.uart0_txd PULLDOWN | MODE0 */
 			>;
 		};
+
+		clkout2_pin: pinmux_clkout2_pin {
+			pinctrl-single,pins = <
+				0x1b4 0x03	/* xdma_event_intr1.clkout2 OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+			>;
+		};
 	};
 
 	ocp {

arch/arm/boot/dts/am335x-evm.dts

@@ -26,7 +26,7 @@ memory {
 
 	am33xx_pinmux: pinmux@44e10800 {
 		pinctrl-names = "default";
-		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
+		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
 
 		matrix_keypad_s0: matrix_keypad_s0 {
 			pinctrl-single,pins = <
@@ -65,6 +65,12 @@ uart0_pins: pinmux_uart0_pins {
 				0x174 0x00	/* uart0_txd.uart0_txd PULLDOWN | MODE0 */
 			>;
 		};
+
+		clkout2_pin: pinmux_clkout2_pin {
+			pinctrl-single,pins = <
+				0x1b4 0x03	/* xdma_event_intr1.clkout2 OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+			>;
+		};
 	};
 
 	ocp {

arch/arm/boot/dts/am335x-evmsk.dts

@@ -32,7 +32,7 @@ memory {
 
 	am33xx_pinmux: pinmux@44e10800 {
 		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_s0>;
+		pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
 
 		user_leds_s0: user_leds_s0 {
 			pinctrl-single,pins = <
@@ -65,6 +65,12 @@ uart0_pins: pinmux_uart0_pins {
 				0x174 0x00	/* uart0_txd.uart0_txd PULLDOWN | MODE0 */
 			>;
 		};
+
+		clkout2_pin: pinmux_clkout2_pin {
+			pinctrl-single,pins = <
+				0x1b4 0x03	/* xdma_event_intr1.clkout2 OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+			>;
+		};
 	};
 
 	ocp {