Commit 4dc08dcc authored by Lay, Kuan Loon's avatar Lay, Kuan Loon Committed by Jakub Kicinski

net: phy: dp83867: introduce critical chip default init for non-of platform

PHY driver dp83867 has rich supports for OF-platform to fine-tune the PHY
chip during phy configuration. However, for non-OF platform, certain PHY
tunable parameters such as IO impedance and RX & TX internal delays are
critical and should be initialized to its default during PHY driver probe.
Tested-by: default avatarClement <clement@intel.com>
Signed-off-by: default avatarLay, Kuan Loon <kuan.loon.lay@intel.com>
Co-developed-by: default avatarOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: default avatarOng Boon Leong <boon.leong.ong@intel.com>
Tested-by: Kurt Kanzenbach's avatarKurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20211013065941.2124858-1-boon.leong.ong@intel.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 4ece1ae4
......@@ -619,6 +619,25 @@ static int dp83867_of_init(struct phy_device *phydev)
#else
static int dp83867_of_init(struct phy_device *phydev)
{
struct dp83867_private *dp83867 = phydev->priv;
u16 delay;
/* For non-OF device, the RX and TX ID values are either strapped
* or take from default value. So, we init RX & TX ID values here
* so that the RGMIIDCTL is configured correctly later in
* dp83867_config_init();
*/
delay = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIIDCTL);
dp83867->rx_id_delay = delay & DP83867_RGMII_RX_CLK_DELAY_MAX;
dp83867->tx_id_delay = (delay >> DP83867_RGMII_TX_CLK_DELAY_SHIFT) &
DP83867_RGMII_TX_CLK_DELAY_MAX;
/* Per datasheet, IO impedance is default to 50-ohm, so we set the
* same here or else the default '0' means highest IO impedance
* which is wrong.
*/
dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN / 2;
return 0;
}
#endif /* CONFIG_OF_MDIO */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment