Skip to content

L
linux
Commit 4dc4000b authored by Emil Tantilov's avatar Emil Tantilov Committed by Jeff Kirsher
Browse files
Options

ixgbe: do not use ixgbe specific mdio defines 

Replace some ixgbe specific MDIO defines with their equivalent
from the kernel.
Signed-off-by: default avatarEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: default avatarKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent d2e455a8
Hide whitespace changes
Inline Side-by-side
Showing with 33 additions and 56 deletions
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
View file @ 4dc4000b
......@@ -2395,9 +2395,7 @@ s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on)
if (!on && ixgbe_mng_present(hw))
return 0;
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
&reg);
status = hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_VEND1, &reg);
if (status)
return status;
......@@ -2409,8 +2407,6 @@ s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on)
reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE;
}
status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
reg);
status = hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_VEND1, reg);
return status;
}
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
View file @ 4dc4000b
......@@ -874,19 +874,13 @@ struct ixgbe_thermal_sensor_data {
#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB 0x4 /* 1Gb/s */
#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB 0x6 /* 10Gb/s */
#define IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG 0x20 /* 10G Control Reg */
#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */
#define IXGBE_MII_AUTONEG_XNP_TX_REG 0x17 /* 1G XNP Transmit */
#define IXGBE_MII_AUTONEG_ADVERTISE_REG 0x10 /* 100M Advertisement */
#define IXGBE_MII_10GBASE_T_ADVERTISE 0x1000 /* full duplex, bit:12*/
#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX 0x4000 /* full duplex, bit:14*/
#define IXGBE_MII_1GBASE_T_ADVERTISE 0x8000 /* full duplex, bit:15*/
#define IXGBE_MII_2_5GBASE_T_ADVERTISE 0x0400
#define IXGBE_MII_5GBASE_T_ADVERTISE 0x0800
#define IXGBE_MII_100BASE_T_ADVERTISE 0x0100 /* full duplex, bit:8 */
#define IXGBE_MII_100BASE_T_ADVERTISE_HALF 0x0080 /* half duplex, bit:7 */
#define IXGBE_MII_RESTART 0x200
#define IXGBE_MII_AUTONEG_COMPLETE 0x20
#define IXGBE_MII_AUTONEG_LINK_UP 0x04
#define IXGBE_MII_AUTONEG_REG 0x0
......@@ -1320,30 +1314,20 @@ struct ixgbe_thermal_sensor_data {
/* MDIO definitions */
#define IXGBE_MDIO_ZERO_DEV_TYPE 0x0
#define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1
#define IXGBE_MDIO_PCS_DEV_TYPE 0x3
#define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4
#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE 0x7
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE 0x1E /* Device 30 */
#define IXGBE_TWINAX_DEV 1
#define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL 0x0 /* VS1 Control Reg */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS 0x1 /* VS1 Status Reg */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS 0x0008 /* 1 = Link Up */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0 - 10G, 1 - 1G */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED 0x0018
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED 0x0010
#define IXGBE_MDIO_AUTO_NEG_CONTROL 0x0 /* AUTO_NEG Control Reg */
#define IXGBE_MDIO_AUTO_NEG_STATUS 0x1 /* AUTO_NEG Status Reg */
#define IXGBE_MDIO_AUTO_NEG_VENDOR_STAT 0xC800 /* AUTO_NEG Vendor Status Reg */
#define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM 0xCC00 /* AUTO_NEG Vendor TX Reg */
#define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2 0xCC01 /* AUTO_NEG Vendor Tx Reg */
#define IXGBE_MDIO_AUTO_NEG_VEN_LSC 0x1 /* AUTO_NEG Vendor Tx LSC */
#define IXGBE_MDIO_AUTO_NEG_ADVT 0x10 /* AUTO_NEG Advt Reg */
#define IXGBE_MDIO_AUTO_NEG_LP 0x13 /* AUTO_NEG LP Status Reg */
#define IXGBE_MDIO_AUTO_NEG_EEE_ADVT 0x3C /* AUTO_NEG EEE Advt Reg */
#define IXGBE_MDIO_PHY_SET_LOW_POWER_MODE 0x0800 /* Set low power mode */
......
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
View file @ 4dc4000b
......@@ -1571,8 +1571,7 @@ static s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw,
/* MAC link is up, so check external PHY link.
* Read this twice back to back to indicate current status.
*/
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
&autoneg_status);
if (status)
return status;
......@@ -1758,7 +1757,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
/* Vendor alarm triggered */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
MDIO_MMD_VEND1,
&reg);
if (status || !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN))
......@@ -1766,7 +1765,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
/* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
MDIO_MMD_VEND1,
&reg);
if (status || !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
......@@ -1775,7 +1774,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
/* Global alarm triggered */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
MDIO_MMD_VEND1,
&reg);
if (status)
......@@ -1790,7 +1789,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) {
/* device fault alarm triggered */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
MDIO_MMD_VEND1,
&reg);
if (status)
return status;
......@@ -1805,14 +1804,14 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
/* Vendor alarm 2 triggered */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &reg);
MDIO_MMD_AN, &reg);
if (status || !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT))
return status;
/* link connect/disconnect event occurred */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &reg);
MDIO_MMD_AN, &reg);
if (status)
return status;
......@@ -1844,20 +1843,20 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
/* Enable link status change alarm */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &reg);
MDIO_MMD_AN, &reg);
if (status)
return status;
reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN;
status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg);
MDIO_MMD_AN, reg);
if (status)
return status;
/* Enable high temperature failure and global fault alarms */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
MDIO_MMD_VEND1,
&reg);
if (status)
return status;
......@@ -1866,14 +1865,14 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN);
status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
MDIO_MMD_VEND1,
reg);
if (status)
return status;
/* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
MDIO_MMD_VEND1,
&reg);
if (status)
return status;
......@@ -1882,14 +1881,14 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
IXGBE_MDIO_GLOBAL_ALARM_1_INT);
status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
MDIO_MMD_VEND1,
reg);
if (status)
return status;
/* Enable chip-wide vendor alarm */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
MDIO_MMD_VEND1,
&reg);
if (status)
return status;
......@@ -1897,7 +1896,7 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN;
status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
MDIO_MMD_VEND1,
reg);
return status;
......@@ -2038,14 +2037,12 @@ static s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up)
*link_up = false;
/* read this twice back to back to indicate current status */
ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
&autoneg_status);
if (ret)
return ret;
ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
&autoneg_status);
if (ret)
return ret;
......@@ -2091,7 +2088,7 @@ static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
return 0;
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
MDIO_MMD_AN,
&speed);
if (status)
return status;
......@@ -2152,10 +2149,10 @@ static s32 ixgbe_led_on_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
/* To turn on the LED, set mode to ON. */
hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
MDIO_MMD_VEND1, &phy_data);
phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK;
hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
MDIO_MMD_VEND1, phy_data);
return 0;
}
......@@ -2174,10 +2171,10 @@ static s32 ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
/* To turn on the LED, set mode to ON. */
hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
MDIO_MMD_VEND1, &phy_data);
phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK;
hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
MDIO_MMD_VEND1, phy_data);
return 0;
}
......@@ -2198,7 +2195,7 @@ static s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw,
*lcd_speed = IXGBE_LINK_SPEED_UNKNOWN;
status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
MDIO_MMD_AN,
&an_lp_status);
if (status)
return status;
......@@ -2345,7 +2342,7 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
return ixgbe_set_copper_phy_power(hw, false);
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
MDIO_MMD_AN,
&speed);
if (status)
return status;
......@@ -2367,20 +2364,20 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
/* Clear AN completed indication */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
MDIO_MMD_AN,
&autoneg_reg);
if (status)
return status;
status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
status = hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
MDIO_MMD_AN,
&an_10g_cntl_reg);
if (status)
return status;
status = hw->phy.ops.read_reg(hw,
IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
MDIO_MMD_AN,
&autoneg_reg);
if (status)
return status;
......@@ -2538,7 +2535,7 @@ static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
status = hw->phy.ops.read_reg(hw,
IXGBE_MDIO_TX_VENDOR_ALARMS_3,
IXGBE_MDIO_PMA_PMD_DEV_TYPE,
MDIO_MMD_PMAPMD,
&reg);
if (status)
return status;
......@@ -2549,7 +2546,7 @@ static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
status = hw->phy.ops.read_reg(hw,
IXGBE_MDIO_GLOBAL_RES_PR_10,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
MDIO_MMD_VEND1,
&reg);
if (status)
return status;
......@@ -2558,7 +2555,7 @@ static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
status = hw->phy.ops.write_reg(hw,
IXGBE_MDIO_GLOBAL_RES_PR_10,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
MDIO_MMD_VEND1,
reg);
if (status)
return status;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7