Commit 4ddcaf1e authored by Linus Walleij's avatar Linus Walleij Committed by Jakub Kicinski

net: dsa: rtl8366: Properly clear member config

When removing a port from a VLAN we are just erasing the
member config for the VLAN, which is wrong: other ports
can be using it.

Just mask off the port and only zero out the rest of the
member config once ports using of the VLAN are removed
from it.
Reported-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Fixes: d8652956 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent d7739b0b
...@@ -452,13 +452,19 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port, ...@@ -452,13 +452,19 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port,
return ret; return ret;
if (vid == vlanmc.vid) { if (vid == vlanmc.vid) {
/* clear VLAN member configurations */ /* Remove this port from the VLAN */
vlanmc.vid = 0; vlanmc.member &= ~BIT(port);
vlanmc.priority = 0; vlanmc.untag &= ~BIT(port);
vlanmc.member = 0; /*
vlanmc.untag = 0; * If no ports are members of this VLAN
vlanmc.fid = 0; * anymore then clear the whole member
* config so it can be reused.
*/
if (!vlanmc.member && vlanmc.untag) {
vlanmc.vid = 0;
vlanmc.priority = 0;
vlanmc.fid = 0;
}
ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
if (ret) { if (ret) {
dev_err(smi->dev, dev_err(smi->dev,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment