arm64: dts: allwinner: pinebook: Remove unused AXP803 regulators

The Pinebook does not use the CSI bus on the A64. In fact it does not
use GPIO port E for anything at all. Thus the following regulators are
not used and do not need voltages set:

 - ALDO1: Connected to VCC-PE only
 - DLDO3: Not connected
 - ELDO3: Not connected
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts

@@ -217,9 +217,7 @@ &battery_power_supply {
 };
 
 &reg_aldo1 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-	regulator-name = "vcc-csi";
+	regulator-name = "vcc-pe";
 };
 
 &reg_aldo2 {
@@ -282,12 +280,6 @@ &reg_dldo2 {
 	regulator-name = "vcc-edp";
 };
 
-&reg_dldo3 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "avdd-csi";
-};
-
 &reg_dldo4 {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
@@ -301,12 +293,6 @@ &reg_eldo1 {
 	regulator-name = "cpvdd";
 };
 
-&reg_eldo3 {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-name = "vdd-1v8-csi";
-};
-
 &reg_fldo1 {
 	regulator-min-microvolt = <1200000>;
 	regulator-max-microvolt = <1200000>;