Commit 4e2f9f1b authored by Joe Perches's avatar Joe Perches Committed by Michael Grzeschik

arcnet: arc-rimi: Use arcnet_<I/O> routines

Simplify and make consistent the current uses of readb/writeb
by using the newly introduced arcnet_<I/O> equivalents.

o Add new #defines for register offsets
o Remove old #defines that included the ioaddr
o Remove obfuscating macros by expanding them in-place where appropriate
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarMichael Grzeschik <m.grzeschik@pengutronix.de>
parent 9c76aa55
......@@ -60,23 +60,16 @@ static void arcrimi_copy_from_card(struct net_device *dev, int bufnum,
#define MIRROR_SIZE (BUFFER_SIZE * 4)
/* COM 9026 controller chip --> ARCnet register addresses */
#define _INTMASK (ioaddr + 0) /* writable */
#define _STATUS (ioaddr + 0) /* readable */
#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */
#define _RESET (ioaddr + 8) /* software reset (on read) */
#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */
#define _ADDR_HI (ioaddr + 15) /* Control registers for said */
#define _ADDR_LO (ioaddr + 14)
#define _CONFIG (ioaddr + 2) /* Configuration register */
#undef ASTATUS
#undef ACOMMAND
#undef AINTMASK
#define ASTATUS() readb(_STATUS)
#define ACOMMAND(cmd) writeb((cmd), _COMMAND)
#define AINTMASK(msk) writeb((msk), _INTMASK)
#define SETCONF() writeb(lp->config, _CONFIG)
#define COM9026_REG_W_INTMASK 0 /* writable */
#define COM9026_REG_R_STATUS 0 /* readable */
#define COM9026_REG_W_COMMAND 1 /* writable, returns random vals on read (?) */
#define COM9026_REG_RW_CONFIG 2 /* Configuration register */
#define COM9026_REG_R_RESET 8 /* software reset (on read) */
#define COM9026_REG_RW_MEMDATA 12 /* Data port for IO-mapped memory */
#define COM9026_REG_W_ADDR_LO 14 /* Control registers for said */
#define COM9026_REG_W_ADDR_HI 15
#define COM9026_REG_R_STATION 1 /* Station ID */
/* We cannot probe for a RIM I card; one reason is I don't know how to reset
* them. In fact, we can't even get their node ID automatically. So, we
......@@ -124,7 +117,7 @@ static int check_mirror(unsigned long addr, size_t size)
p = ioremap(addr, size);
if (p) {
if (readb(p) == TESTvalue)
if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue)
res = 1;
else
res = 0;
......@@ -162,8 +155,9 @@ static int __init arcrimi_found(struct net_device *dev)
}
shmem = dev->mem_start;
writeb(TESTvalue, p);
writeb(dev->dev_addr[0], p + 1); /* actually the node ID */
arcnet_writeb(TESTvalue, p, COM9026_REG_W_INTMASK);
arcnet_writeb(TESTvalue, p, COM9026_REG_W_COMMAND);
/* actually the station/node ID */
/* find the real shared memory start/end points, including mirrors */
......@@ -172,7 +166,7 @@ static int __init arcrimi_found(struct net_device *dev)
* 2k (or there are no mirrors at all) but on some, it's 4k.
*/
mirror_size = MIRROR_SIZE;
if (readb(p) == TESTvalue &&
if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue &&
check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 &&
check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1)
mirror_size = 2 * MIRROR_SIZE;
......@@ -224,7 +218,7 @@ static int __init arcrimi_found(struct net_device *dev)
}
/* get and check the station ID from offset 1 in shmem */
dev->dev_addr[0] = readb(lp->mem_start + 1);
dev->dev_addr[0] = arcnet_readb(lp->mem_start, COM9026_REG_R_STATION);
arc_printk(D_NORMAL, dev, "ARCnet RIM I: station %02Xh found at IRQ %d, ShMem %lXh (%ld*%d bytes)\n",
dev->dev_addr[0],
......@@ -260,17 +254,18 @@ static int arcrimi_reset(struct net_device *dev, int really_reset)
void __iomem *ioaddr = lp->mem_start + 0x800;
arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
dev->name, ASTATUS());
dev->name, arcnet_readb(ioaddr, COM9026_REG_R_STATUS));
if (really_reset) {
writeb(TESTvalue, ioaddr - 0x800); /* fake reset */
arcnet_writeb(TESTvalue, ioaddr, -0x800); /* fake reset */
return 0;
}
ACOMMAND(CFLAGScmd | RESETclear); /* clear flags & end reset */
ACOMMAND(CFLAGScmd | CONFIGclear);
/* clear flags & end reset */
arcnet_writeb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND);
arcnet_writeb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND);
/* enable extended (512-byte) packets */
ACOMMAND(CONFIGcmd | EXTconf);
arcnet_writeb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND);
/* done! return success. */
return 0;
......@@ -281,7 +276,7 @@ static void arcrimi_setmask(struct net_device *dev, int mask)
struct arcnet_local *lp = netdev_priv(dev);
void __iomem *ioaddr = lp->mem_start + 0x800;
AINTMASK(mask);
arcnet_writeb(mask, ioaddr, COM9026_REG_W_INTMASK);
}
static int arcrimi_status(struct net_device *dev)
......@@ -289,7 +284,7 @@ static int arcrimi_status(struct net_device *dev)
struct arcnet_local *lp = netdev_priv(dev);
void __iomem *ioaddr = lp->mem_start + 0x800;
return ASTATUS();
return arcnet_readb(ioaddr, COM9026_REG_R_STATUS);
}
static void arcrimi_command(struct net_device *dev, int cmd)
......@@ -297,7 +292,7 @@ static void arcrimi_command(struct net_device *dev, int cmd)
struct arcnet_local *lp = netdev_priv(dev);
void __iomem *ioaddr = lp->mem_start + 0x800;
ACOMMAND(cmd);
arcnet_writeb(cmd, ioaddr, COM9026_REG_W_COMMAND);
}
static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment