Merge branch 'r8152-next'

Hayes Wang says:

====================
r8152: rtl_ops_init modify

Initialize the ops through tp->version. This could skip checking
each VID/PID.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/usb/r8152.c

@@ -461,11 +461,7 @@ enum rtl8152_flags {
 
 /* Define these values to match your device */
 #define VENDOR_ID_REALTEK		0x0bda
-#define PRODUCT_ID_RTL8152		0x8152
-#define PRODUCT_ID_RTL8153		0x8153
-
 #define VENDOR_ID_SAMSUNG		0x04e8
-#define PRODUCT_ID_SAMSUNG		0xa101
 
 #define MCU_TYPE_PLA			0x0100
 #define MCU_TYPE_USB			0x0000
@@ -3742,66 +3738,43 @@ static void rtl8153_unload(struct r8152 *tp)
 	r8153_power_cut_en(tp, false);
 }
 
-static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
+static int rtl_ops_init(struct r8152 *tp)
 {
 	struct rtl_ops *ops = &tp->rtl_ops;
-	int ret = -ENODEV;
-
-	switch (id->idVendor) {
-	case VENDOR_ID_REALTEK:
-		switch (id->idProduct) {
-		case PRODUCT_ID_RTL8152:
-			ops->init		= r8152b_init;
-			ops->enable		= rtl8152_enable;
-			ops->disable		= rtl8152_disable;
-			ops->up			= rtl8152_up;
-			ops->down		= rtl8152_down;
-			ops->unload		= rtl8152_unload;
-			ops->eee_get		= r8152_get_eee;
-			ops->eee_set		= r8152_set_eee;
-			ret = 0;
-			break;
-		case PRODUCT_ID_RTL8153:
-			ops->init		= r8153_init;
-			ops->enable		= rtl8153_enable;
-			ops->disable		= rtl8153_disable;
-			ops->up			= rtl8153_up;
-			ops->down		= rtl8153_down;
-			ops->unload		= rtl8153_unload;
-			ops->eee_get		= r8153_get_eee;
-			ops->eee_set		= r8153_set_eee;
-			ret = 0;
-			break;
-		default:
-			break;
-		}
+	int ret = 0;
+
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+		ops->init		= r8152b_init;
+		ops->enable		= rtl8152_enable;
+		ops->disable		= rtl8152_disable;
+		ops->up			= rtl8152_up;
+		ops->down		= rtl8152_down;
+		ops->unload		= rtl8152_unload;
+		ops->eee_get		= r8152_get_eee;
+		ops->eee_set		= r8152_set_eee;
 		break;
 
-	case VENDOR_ID_SAMSUNG:
-		switch (id->idProduct) {
-		case PRODUCT_ID_SAMSUNG:
-			ops->init		= r8153_init;
-			ops->enable		= rtl8153_enable;
-			ops->disable		= rtl8153_disable;
-			ops->up			= rtl8153_up;
-			ops->down		= rtl8153_down;
-			ops->unload		= rtl8153_unload;
-			ops->eee_get		= r8153_get_eee;
-			ops->eee_set		= r8153_set_eee;
-			ret = 0;
-			break;
-		default:
-			break;
-		}
+	case RTL_VER_03:
+	case RTL_VER_04:
+	case RTL_VER_05:
+		ops->init		= r8153_init;
+		ops->enable		= rtl8153_enable;
+		ops->disable		= rtl8153_disable;
+		ops->up			= rtl8153_up;
+		ops->down		= rtl8153_down;
+		ops->unload		= rtl8153_unload;
+		ops->eee_get		= r8153_get_eee;
+		ops->eee_set		= r8153_set_eee;
 		break;
 
 	default:
+		ret = -ENODEV;
+		netif_err(tp, probe, tp->netdev, "Unknown Device\n");
 		break;
 	}
 
-	if (ret)
-		netif_err(tp, probe, tp->netdev, "Unknown Device\n");
-
 	return ret;
 }
 
@@ -3833,7 +3806,8 @@ static int rtl8152_probe(struct usb_interface *intf,
 	tp->netdev = netdev;
 	tp->intf = intf;
 
-	ret = rtl_ops_init(tp, id);
+	r8152b_get_version(tp);
+	ret = rtl_ops_init(tp);
 	if (ret)
 		goto out;
 
@@ -3866,11 +3840,9 @@ static int rtl8152_probe(struct usb_interface *intf,
 	tp->mii.phy_id_mask = 0x3f;
 	tp->mii.reg_num_mask = 0x1f;
 	tp->mii.phy_id = R8152_PHY_ID;
-	tp->mii.supports_gmii = 0;
 
 	intf->needs_remote_wakeup = 1;
 
-	r8152b_get_version(tp);
 	tp->rtl_ops.init(tp);
 	set_ethernet_addr(tp);
 
@@ -3922,9 +3894,9 @@ static void rtl8152_disconnect(struct usb_interface *intf)
 
 /* table of devices that work with this driver */
 static struct usb_device_id rtl8152_table[] = {
-	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)},
-	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8153)},
-	{USB_DEVICE(VENDOR_ID_SAMSUNG, PRODUCT_ID_SAMSUNG)},
+	{USB_DEVICE(VENDOR_ID_REALTEK, 0x8152)},
+	{USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)},
+	{USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101)},
 	{}
 };