arm64: dts: ti: k3-j7200: use ti,j7200-padconf compatible

For suspend to ram on j7200, use ti,j7200-padconf compatible to save and
restore pinctrl contexts.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231128-j7200-pinctrl-s2r-v1-3-704e7dc24460@bootlin.comSigned-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arch/arm64/boot/dts/ti/k3-j7200-main.dtsi

@@ -399,7 +399,7 @@ cpts@3d000 {
 
 	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
 	main_timerio_input: pinctrl@104200 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x0 0x104200 0x0 0x50>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -408,7 +408,7 @@ main_timerio_input: pinctrl@104200 {
 
 	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
 	main_timerio_output: pinctrl@104280 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x0 0x104280 0x0 0x20>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -416,7 +416,7 @@ main_timerio_output: pinctrl@104280 {
 	};
 
 	main_pmx0: pinctrl@11c000 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x11c000 0x00 0x10c>;
 		#pinctrl-cells = <1>;
@@ -425,7 +425,7 @@ main_pmx0: pinctrl@11c000 {
 	};
 
 	main_pmx1: pinctrl@11c11c {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x11c11c 0x00 0xc>;
 		#pinctrl-cells = <1>;

arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi

@@ -192,7 +192,7 @@ chipid: chipid@14 {
 
 	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
 	mcu_timerio_input: pinctrl@40f04200 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x0 0x40f04200 0x0 0x28>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -202,7 +202,7 @@ mcu_timerio_input: pinctrl@40f04200 {
 
 	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
 	mcu_timerio_output: pinctrl@40f04280 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x0 0x40f04280 0x0 0x28>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -211,7 +211,7 @@ mcu_timerio_output: pinctrl@40f04280 {
 	};
 
 	wkup_pmx0: pinctrl@4301c000 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c000 0x00 0x34>;
 		#pinctrl-cells = <1>;
@@ -220,7 +220,7 @@ wkup_pmx0: pinctrl@4301c000 {
 	};
 
 	wkup_pmx1: pinctrl@4301c038 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c038 0x00 0x8>;
 		#pinctrl-cells = <1>;
@@ -229,7 +229,7 @@ wkup_pmx1: pinctrl@4301c038 {
 	};
 
 	wkup_pmx2: pinctrl@4301c068 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c068 0x00 0xec>;
 		#pinctrl-cells = <1>;
@@ -238,7 +238,7 @@ wkup_pmx2: pinctrl@4301c068 {
 	};
 
 	wkup_pmx3: pinctrl@4301c174 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c174 0x00 0x20>;
 		#pinctrl-cells = <1>;