ARM: nomadik: push accelerometer down to boards

The two Nomadik variants have the accelerometer mounted on
different I2C lines. Push the definition down to the top-level
board DTS files to get things right.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/ste-nomadik-nhk15.dts

@@ -83,6 +83,11 @@ ethernet@300 {
 	};
 
 	i2c0 {
+		lis3lv02dl@1d {
+			/* Accelerometer */
+			compatible = "st,lis3lv02dl-accel";
+			reg = <0x1d>;
+		};
 		stmpe0: stmpe2401@43 {
 			compatible = "st,stmpe2401";
 			reg = <0x43>;

arch/arm/boot/dts/ste-nomadik-s8815.dts

@@ -105,6 +105,14 @@ ethernet@300 {
 		};
 	};
 
+	i2c1 {
+		lis3lv02dl@1d {
+			/* Accelerometer */
+			compatible = "st,lis3lv02dl-accel";
+			reg = <0x1d>;
+		};
+	};
+
 	/* GPIO I2C connected to the USB portions of the STw4811 only */
 	gpio-i2c {
 		compatible = "i2c-gpio";

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -720,11 +720,6 @@ stw5095@1a {
 			   compatible = "st,stw5095";
 			   reg = <0x1a>;
 		};
-		lis3lv02dl@1d {
-			/* Accelerometer */
-			compatible = "st,lis3lv02dl-accel";
-			reg = <0x1d>;
-		};
 	};
 
 	amba {