net: phy: phy_device: fix PHY WOL enabled, PM failed to suspend

If the PHY of the mido bus is enabled with Wake-on-LAN (WOL),
we cannot suspend the PHY. Although the WOL status has been
checked in phy_suspend(), returning -EBUSY(-16) would cause
the Power Management (PM) to fail to suspend. Since
phy_suspend() is an exported symbol (EXPORT_SYMBOL),
timely error reporting is needed. Therefore, an additional
check is performed here. If the PHY of the mido bus is enabled
with WOL, we skip calling phy_suspend() to avoid PM failure.

From the following logs, it has been observed that the phydev->attached_dev
is NULL, phydev is "stmmac-0:01", it not attached, but it will affect suspend
and resume.The actually attached "stmmac-0:00" will not dpm_run_callback():
mdio_bus_phy_suspend().

init log:
[    5.932502] YT8521 Gigabit Ethernet stmmac-0:00: attached PHY driver
(mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    5.932512] YT8521 Gigabit Ethernet stmmac-0:01: attached PHY driver
(mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[   24.566289] YT8521 Gigabit Ethernet stmmac-0:00: yt8521_read_status,
link down, media: UTP

suspend log:
[  322.631362] OOM killer disabled.
[  322.631364] Freezing remaining freezable tasks
[  322.632536] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[  322.632540] printk: Suspending console(s) (use no_console_suspend to debug)
[  322.633052] YT8521 Gigabit Ethernet stmmac-0:01:
PM: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x110 [libphy] returns -16
[  322.633071] YT8521 Gigabit Ethernet stmmac-0:01:
PM: failed to suspend: error -16
[  322.669699] PM: Some devices failed to suspend, or early wake event detected
[  322.669949] OOM killer enabled.
[  322.669951] Restarting tasks ... done.
[  322.671008] random: crng reseeded on system resumption
[  322.671014] PM: suspend exit

Add a function that phylib can inquire of the driver whether WoL
has been enabled at the PHY.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Youwan Wang <youwan@nfschina.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240731091537.771391-1-youwan@nfschina.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/phy/phy_device.c

@@ -279,6 +279,15 @@ static struct phy_driver genphy_driver;
 static LIST_HEAD(phy_fixup_list);
 static DEFINE_MUTEX(phy_fixup_lock);
 
+static bool phy_drv_wol_enabled(struct phy_device *phydev)
+{
+	struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
+
+	phy_ethtool_get_wol(phydev, &wol);
+
+	return wol.wolopts != 0;
+}
+
 static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
 {
 	struct device_driver *drv = phydev->mdio.dev.driver;
@@ -288,6 +297,12 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
 	if (!drv || !phydrv->suspend)
 		return false;
 
+	/* If the PHY on the mido bus is not attached but has WOL enabled
+	 * we cannot suspend the PHY.
+	 */
+	if (!netdev && phy_drv_wol_enabled(phydev))
+		return false;
+
 	/* PHY not attached? May suspend if the PHY has not already been
 	 * suspended as part of a prior call to phy_disconnect() ->
 	 * phy_detach() -> phy_suspend() because the parent netdev might be the
@@ -1975,7 +1990,6 @@ EXPORT_SYMBOL(phy_detach);
 
 int phy_suspend(struct phy_device *phydev)
 {
-	struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
 	struct net_device *netdev = phydev->attached_dev;
 	const struct phy_driver *phydrv = phydev->drv;
 	int ret;
@@ -1983,8 +1997,7 @@ int phy_suspend(struct phy_device *phydev)
 	if (phydev->suspended || !phydrv)
 		return 0;
 
-	phy_ethtool_get_wol(phydev, &wol);
-	phydev->wol_enabled = wol.wolopts ||
+	phydev->wol_enabled = phy_drv_wol_enabled(phydev) ||
 			      (netdev && netdev->ethtool->wol_enabled);
 	/* If the device has WOL enabled, we cannot suspend the PHY */
 	if (phydev->wol_enabled && !(phydrv->flags & PHY_ALWAYS_CALL_SUSPEND))