staging: iio: ad7780: Use devm_* APIs

devm_* APIs are device managed and make code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/staging/iio/adc/ad7780.c

@@ -171,7 +171,7 @@ static int ad7780_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 	int ret, voltage_uv = 0;
 
-	indio_dev = iio_device_alloc(sizeof(*st));
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -180,11 +180,11 @@ static int ad7780_probe(struct spi_device *spi)
 
 	ad_sd_init(&st->sd, indio_dev, spi, &ad7780_sigma_delta_info);
 
-	st->reg = regulator_get(&spi->dev, "vcc");
+	st->reg = devm_regulator_get(&spi->dev, "vcc");
 	if (!IS_ERR(st->reg)) {
 		ret = regulator_enable(st->reg);
 		if (ret)
-			goto error_put_reg;
+			return ret;
 
 		voltage_uv = regulator_get_voltage(st->reg);
 	}
@@ -210,8 +210,8 @@ static int ad7780_probe(struct spi_device *spi)
 
 	if (pdata && gpio_is_valid(pdata->gpio_pdrst)) {
 
-		ret = gpio_request_one(pdata->gpio_pdrst, GPIOF_OUT_INIT_LOW,
-			       "AD7780 /PDRST");
+		ret = devm_gpio_request_one(&spi->dev, pdata->gpio_pdrst,
+					GPIOF_OUT_INIT_LOW, "AD7780 /PDRST");
 		if (ret) {
 			dev_err(&spi->dev, "failed to request GPIO PDRST\n");
 			goto error_disable_reg;
@@ -223,7 +223,7 @@ static int ad7780_probe(struct spi_device *spi)
 
 	ret = ad_sd_setup_buffer_and_trigger(indio_dev);
 	if (ret)
-		goto error_free_gpio;
+		goto error_disable_reg;
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
@@ -233,17 +233,9 @@ static int ad7780_probe(struct spi_device *spi)
 
 error_cleanup_buffer_and_trigger:
 	ad_sd_cleanup_buffer_and_trigger(indio_dev);
-error_free_gpio:
-	if (pdata && gpio_is_valid(pdata->gpio_pdrst))
-		gpio_free(pdata->gpio_pdrst);
 error_disable_reg:
 	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-error_put_reg:
-	if (!IS_ERR(st->reg))
-		regulator_put(st->reg);
-
-	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -256,14 +248,8 @@ static int ad7780_remove(struct spi_device *spi)
 	iio_device_unregister(indio_dev);
 	ad_sd_cleanup_buffer_and_trigger(indio_dev);
 
-	if (gpio_is_valid(st->powerdown_gpio))
-		gpio_free(st->powerdown_gpio);
-
-	if (!IS_ERR(st->reg)) {
+	if (!IS_ERR(st->reg))
 		regulator_disable(st->reg);
-		regulator_put(st->reg);
-	}
-	iio_device_free(indio_dev);
 
 	return 0;
 }