Commit 4f912b89 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Greg Kroah-Hartman

serial: 8250_lpss: Enable HS UART on Elkhart Lake

Intel Elkhart Lake may use High Speed UART from OSE IP block.
This is different to what we have in main LPSS, though compatible
with older version of it, which is handled by this driver.

Enable OSE HS UART on Intel Elkhart Lake by adding PCI IDs.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: default avatarHeikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20190806094322.64987-9-andriy.shevchenko@linux.intel.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent d53aa935
......@@ -24,6 +24,13 @@
#define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a
#define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c
#define PCI_DEVICE_ID_INTEL_EHL_UART0 0x4b96
#define PCI_DEVICE_ID_INTEL_EHL_UART1 0x4b97
#define PCI_DEVICE_ID_INTEL_EHL_UART2 0x4b98
#define PCI_DEVICE_ID_INTEL_EHL_UART3 0x4b99
#define PCI_DEVICE_ID_INTEL_EHL_UART4 0x4b9a
#define PCI_DEVICE_ID_INTEL_EHL_UART5 0x4b9b
#define PCI_DEVICE_ID_INTEL_BDW_UART1 0x9ce3
#define PCI_DEVICE_ID_INTEL_BDW_UART2 0x9ce4
......@@ -349,6 +356,11 @@ static const struct lpss8250_board byt_board = {
.setup = byt_serial_setup,
};
static const struct lpss8250_board ehl_board = {
.freq = 200000000,
.base_baud = 12500000,
};
static const struct lpss8250_board qrk_board = {
.freq = 44236800,
.base_baud = 2764800,
......@@ -358,6 +370,12 @@ static const struct lpss8250_board qrk_board = {
static const struct pci_device_id pci_ids[] = {
{ PCI_DEVICE_DATA(INTEL, QRK_UARTx, &qrk_board) },
{ PCI_DEVICE_DATA(INTEL, EHL_UART0, &ehl_board) },
{ PCI_DEVICE_DATA(INTEL, EHL_UART1, &ehl_board) },
{ PCI_DEVICE_DATA(INTEL, EHL_UART2, &ehl_board) },
{ PCI_DEVICE_DATA(INTEL, EHL_UART3, &ehl_board) },
{ PCI_DEVICE_DATA(INTEL, EHL_UART4, &ehl_board) },
{ PCI_DEVICE_DATA(INTEL, EHL_UART5, &ehl_board) },
{ PCI_DEVICE_DATA(INTEL, BYT_UART1, &byt_board) },
{ PCI_DEVICE_DATA(INTEL, BYT_UART2, &byt_board) },
{ PCI_DEVICE_DATA(INTEL, BSW_UART1, &byt_board) },
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment