net: phy: marvell: fix HWMON enable register for 6390

Register 27_6.15:14 has the following description in 88E6393X
documentation:
  Temperature Sensor Enable
    0x0 - Sample every 1s
    0x1 - Sense rate decided by bits 10:8 of this register
    0x2 - Use 26_6.5 (One shot Temperature Sample) to enable
    0x3 - Disable

This is compatible with how the 6390 code uses this register currently,
but the 6390 code handles it as two 1-bit registers (somewhat), instead
of one register with 4 possible values.

(A newer version of the 6390 documentation removed temperature sensor
 section completely. In an older version, the above mentioned register
 is reserved, although it is R/W. Since the code works, I think we can
 assume that it is correct.)

Rename this register and define all 4 values according to 6393X
documentation.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/marvell.c

@@ -113,11 +113,11 @@
 #define MII_88E1540_COPPER_CTRL3_FAST_LINK_DOWN		BIT(9)
 
 #define MII_88E6390_MISC_TEST		0x1b
-#define MII_88E6390_MISC_TEST_SAMPLE_1S		0
-#define MII_88E6390_MISC_TEST_SAMPLE_10MS	BIT(14)
-#define MII_88E6390_MISC_TEST_SAMPLE_DISABLE	BIT(15)
-#define MII_88E6390_MISC_TEST_SAMPLE_ENABLE	0
-#define MII_88E6390_MISC_TEST_SAMPLE_MASK	(0x3 << 14)
+#define MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE_SAMPLE_1S	(0x0 << 14)
+#define MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE		(0x1 << 14)
+#define MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE_ONESHOT	(0x2 << 14)
+#define MII_88E6390_MISC_TEST_TEMP_SENSOR_DISABLE		(0x3 << 14)
+#define MII_88E6390_MISC_TEST_TEMP_SENSOR_MASK			(0x3 << 14)
 
 #define MII_88E6390_TEMP_SENSOR		0x1c
 #define MII_88E6390_TEMP_SENSOR_MASK	0xff
@@ -2352,9 +2352,8 @@ static int m88e6390_get_temp(struct phy_device *phydev, long *temp)
 	if (ret < 0)
 		goto error;
 
-	ret = ret & ~MII_88E6390_MISC_TEST_SAMPLE_MASK;
-	ret |= MII_88E6390_MISC_TEST_SAMPLE_ENABLE |
-		MII_88E6390_MISC_TEST_SAMPLE_1S;
+	ret = ret & ~MII_88E6390_MISC_TEST_TEMP_SENSOR_MASK;
+	ret |= MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE_SAMPLE_1S;
 
 	ret = __phy_write(phydev, MII_88E6390_MISC_TEST, ret);
 	if (ret < 0)
@@ -2381,8 +2380,8 @@ static int m88e6390_get_temp(struct phy_device *phydev, long *temp)
 	if (ret < 0)
 		goto error;
 
-	ret = ret & ~MII_88E6390_MISC_TEST_SAMPLE_MASK;
-	ret |= MII_88E6390_MISC_TEST_SAMPLE_DISABLE;
+	ret = ret & ~MII_88E6390_MISC_TEST_TEMP_SENSOR_MASK;
+	ret |= MII_88E6390_MISC_TEST_TEMP_SENSOR_DISABLE;
 
 	ret = __phy_write(phydev, MII_88E6390_MISC_TEST, ret);