mtd: nand: make mtk_ecc.c a separated module

this code will be used in mediatek snfi spi-mem controller with
pipelined ECC engine.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220424032527.673605-2-gch981213@gmail.com

drivers/mtd/nand/Kconfig

@@ -53,6 +53,13 @@ config MTD_NAND_ECC_MXIC
 	help
 	  This enables support for the hardware ECC engine from Macronix.
 
+config MTD_NAND_ECC_MEDIATEK
+	tristate "Mediatek hardware ECC engine"
+	depends on HAS_IOMEM
+	select MTD_NAND_ECC
+	help
+	  This enables support for the hardware ECC engine from Mediatek.
+
 endmenu
 
 endmenu

drivers/mtd/nand/Makefile

@@ -2,6 +2,7 @@
 
 nandcore-objs := core.o bbt.o
 obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
+obj-$(CONFIG_MTD_NAND_ECC_MEDIATEK) += ecc-mtk.o
 
 obj-y	+= onenand/
 obj-y	+= raw/

drivers/mtd/nand/raw/mtk_ecc.c → drivers/mtd/nand/ecc-mtk.c

@@ -15,8 +15,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/mutex.h>
-
-#include "mtk_ecc.h"
+#include <linux/mtd/nand-ecc-mtk.h>
 
 #define ECC_IDLE_MASK		BIT(0)
 #define ECC_IRQ_EN		BIT(0)

drivers/mtd/nand/raw/Kconfig

@@ -374,6 +374,7 @@ config MTD_NAND_QCOM
 
 config MTD_NAND_MTK
 	tristate "MTK NAND controller"
+	depends on MTD_NAND_ECC_MEDIATEK
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	depends on HAS_IOMEM
 	help

drivers/mtd/nand/raw/Makefile

@@ -48,7 +48,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI)		+= sunxi_nand.o
 obj-$(CONFIG_MTD_NAND_HISI504)	        += hisi504_nand.o
 obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand/
 obj-$(CONFIG_MTD_NAND_QCOM)		+= qcom_nandc.o
-obj-$(CONFIG_MTD_NAND_MTK)		+= mtk_ecc.o mtk_nand.o
+obj-$(CONFIG_MTD_NAND_MTK)		+= mtk_nand.o
 obj-$(CONFIG_MTD_NAND_MXIC)		+= mxic_nand.o
 obj-$(CONFIG_MTD_NAND_TEGRA)		+= tegra_nand.o
 obj-$(CONFIG_MTD_NAND_STM32_FMC2)	+= stm32_fmc2_nand.o

drivers/mtd/nand/raw/mtk_nand.c

@@ -17,7 +17,7 @@
 #include <linux/iopoll.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include "mtk_ecc.h"
+#include <linux/mtd/nand-ecc-mtk.h>
 
 /* NAND controller register definition */
 #define NFI_CNFG		(0x00)