Commit 4fec76e0 authored by Adrian Huang's avatar Adrian Huang Committed by Andi Shyti

i2c: designware: Fix wrong setting for {ss,fs,hs}_{h,l}cnt registers

When disabling CONFIG_X86_AMD_PLATFORM_DEVICE option, the driver
'drivers/acpi/acpi_apd.c' won't be compiled. This leads to a situation
where BMC (Baseboard Management Controller) cannot retrieve the memory
temperature via the i2c interface after i2c DW driver is loaded. Note
that BMC can retrieve the memory temperature before booting into OS.

[Debugging Detail]
  1. dev->pclk and dev->clk are NULL when calling devm_clk_get_optional()
     in dw_i2c_plat_probe().

  2. The callings of i2c_dw_scl_hcnt() in i2c_dw_set_timings_master()
     return 65528 (-8 in integer format) or 65533 (-3 in integer format).
     The following log shows SS's HCNT/LCNT:

       i2c_designware AMDI0010:01: Standard Mode HCNT:LCNT = 65533:65535

  3. The callings of i2c_dw_scl_lcnt() in i2c_dw_set_timings_master()
     return 65535 (-1 in integer format). The following log shows SS's
     HCNT/LCNT:

       i2c_designware AMDI0010:01: Fast Mode HCNT:LCNT = 65533:65535

  4. i2c_dw_init_master() configures the register IC_SS_SCL_HCNT with
     the value 65533. However, the DW i2c databook mentioned the value
     cannot be higher than 65525. Quote from the DW i2c databook:

       NOTE: This register must not be programmed to a value higher than
             65525, because DW_apb_i2c uses a 16-bit counter to flag an
             I2C bus idle condition when this counter reaches a value of
             IC_SS_SCL_HCNT + 10.

  5. Since ss_hcnt, ss_lcnt, fs_hcnt, and fs_lcnt are the invalid
     values, we should not write the corresponding registers.

Fix the issue by reading dev->{ss,fs,hs}_hcnt and dev->{ss,fs,hs}_lcnt
from HW registers if ic_clk is not set.
Reported-by: default avatarDong Wang <wangdong28@lenovo.com>
Suggested-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: default avatarAdrian Huang <ahuang12@lenovo.com>
Tested-by: default avatarDong Wang <wangdong28@lenovo.com>
Acked-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: default avatarAndi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/linux-i2c/8295cbe1-a7c5-4a35-a189-5d0bff51ede6@linux.intel.com/
parent da3ea350
......@@ -332,8 +332,27 @@ void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
}
EXPORT_SYMBOL_GPL(i2c_dw_adjust_bus_speed);
u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
static u32 i2c_dw_read_scl_reg(struct dw_i2c_dev *dev, u32 reg)
{
u32 val;
int ret;
ret = i2c_dw_acquire_lock(dev);
if (ret)
return 0;
ret = regmap_read(dev->map, reg, &val);
i2c_dw_release_lock(dev);
return ret ? 0 : val;
}
u32 i2c_dw_scl_hcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk,
u32 tSYMBOL, u32 tf, int cond, int offset)
{
if (!ic_clk)
return i2c_dw_read_scl_reg(dev, reg);
/*
* DesignWare I2C core doesn't seem to have solid strategy to meet
* the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec
......@@ -372,8 +391,12 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
3 + offset;
}
u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
u32 i2c_dw_scl_lcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk,
u32 tLOW, u32 tf, int offset)
{
if (!ic_clk)
return i2c_dw_read_scl_reg(dev, reg);
/*
* Conditional expression:
*
......
......@@ -329,8 +329,10 @@ struct i2c_dw_semaphore_callbacks {
};
int i2c_dw_init_regmap(struct dw_i2c_dev *dev);
u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
u32 i2c_dw_scl_hcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk,
u32 tSYMBOL, u32 tf, int cond, int offset);
u32 i2c_dw_scl_lcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk,
u32 tLOW, u32 tf, int offset);
int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev);
u32 i2c_dw_clk_rate(struct dw_i2c_dev *dev);
int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare);
......
......@@ -64,13 +64,17 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
if (!dev->ss_hcnt || !dev->ss_lcnt) {
ic_clk = i2c_dw_clk_rate(dev);
dev->ss_hcnt =
i2c_dw_scl_hcnt(ic_clk,
i2c_dw_scl_hcnt(dev,
DW_IC_SS_SCL_HCNT,
ic_clk,
4000, /* tHD;STA = tHIGH = 4.0 us */
sda_falling_time,
0, /* 0: DW default, 1: Ideal */
0); /* No offset */
dev->ss_lcnt =
i2c_dw_scl_lcnt(ic_clk,
i2c_dw_scl_lcnt(dev,
DW_IC_SS_SCL_LCNT,
ic_clk,
4700, /* tLOW = 4.7 us */
scl_falling_time,
0); /* No offset */
......@@ -94,13 +98,17 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
} else {
ic_clk = i2c_dw_clk_rate(dev);
dev->fs_hcnt =
i2c_dw_scl_hcnt(ic_clk,
i2c_dw_scl_hcnt(dev,
DW_IC_FS_SCL_HCNT,
ic_clk,
260, /* tHIGH = 260 ns */
sda_falling_time,
0, /* DW default */
0); /* No offset */
dev->fs_lcnt =
i2c_dw_scl_lcnt(ic_clk,
i2c_dw_scl_lcnt(dev,
DW_IC_FS_SCL_LCNT,
ic_clk,
500, /* tLOW = 500 ns */
scl_falling_time,
0); /* No offset */
......@@ -114,13 +122,17 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
if (!dev->fs_hcnt || !dev->fs_lcnt) {
ic_clk = i2c_dw_clk_rate(dev);
dev->fs_hcnt =
i2c_dw_scl_hcnt(ic_clk,
i2c_dw_scl_hcnt(dev,
DW_IC_FS_SCL_HCNT,
ic_clk,
600, /* tHD;STA = tHIGH = 0.6 us */
sda_falling_time,
0, /* 0: DW default, 1: Ideal */
0); /* No offset */
dev->fs_lcnt =
i2c_dw_scl_lcnt(ic_clk,
i2c_dw_scl_lcnt(dev,
DW_IC_FS_SCL_LCNT,
ic_clk,
1300, /* tLOW = 1.3 us */
scl_falling_time,
0); /* No offset */
......@@ -142,13 +154,17 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
} else if (!dev->hs_hcnt || !dev->hs_lcnt) {
ic_clk = i2c_dw_clk_rate(dev);
dev->hs_hcnt =
i2c_dw_scl_hcnt(ic_clk,
i2c_dw_scl_hcnt(dev,
DW_IC_HS_SCL_HCNT,
ic_clk,
160, /* tHIGH = 160 ns */
sda_falling_time,
0, /* DW default */
0); /* No offset */
dev->hs_lcnt =
i2c_dw_scl_lcnt(ic_clk,
i2c_dw_scl_lcnt(dev,
DW_IC_HS_SCL_LCNT,
ic_clk,
320, /* tLOW = 320 ns */
scl_falling_time,
0); /* No offset */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment