Merge branch 'ib-mfd-regulator-3.15' into HEAD

Documentation/devicetree/bindings/mfd/s2mpa01.txt

+
+* Samsung S2MPA01 Voltage and Current Regulator
+
+The Samsung S2MPA01 is a multi-function device which includes high
+efficiency buck converters including Dual-Phase buck converter, various LDOs,
+and an RTC. It is interfaced to the host controller using an I2C interface.
+Each sub-block is addressed by the host system using different I2C slave
+addresses.
+
+Required properties:
+- compatible: Should be "samsung,s2mpa01-pmic".
+- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the interrupts from s2mpa01 are delivered to.
+- interrupts: An interrupt specifier for the sole interrupt generated by the
+  device.
+
+Optional nodes:
+- regulators: The regulators of s2mpa01 that have to be instantiated should be
+  included in a sub-node named 'regulators'. Regulator nodes and constraints
+  included in this sub-node use the standard regulator bindings which are
+  documented elsewhere.
+
+Properties for BUCK regulator nodes:
+- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
+  (default), 25000, or 50000. May be 0 for disabling the ramp delay on
+  BUCK{1,2,3,4}.
+
+ In the absence of the regulator-ramp-delay property, the default ramp
+ delay will be used.
+
+  NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
+  for a particular group of BUCKs. So provide same regulator-ramp-delay=<value>.
+
+  The following BUCKs share ramp settings:
+  * 1 and 6
+  * 2 and 4
+  * 8, 9, and 10
+
+The following are the names of the regulators that the s2mpa01 PMIC block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of s2mpa01.
+
+	- LDOn
+		  - valid values for n are 1 to 26
+		  - Example: LDO1, LD02, LDO26
+	- BUCKn
+		  - valid values for n are 1 to 10.
+		  - Example: BUCK1, BUCK2, BUCK9
+
+Example:
+
+	s2mpa01_pmic@66 {
+		compatible = "samsung,s2mpa01-pmic";
+		reg = <0x66>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_MMC2";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <50000>;
+			};
+		};
+	};

drivers/mfd/sec-core.c

@@ -26,7 +26,9 @@
 #include <linux/mfd/samsung/core.h>
 #include <linux/mfd/samsung/irq.h>
 #include <linux/mfd/samsung/rtc.h>
+#include <linux/mfd/samsung/s2mpa01.h>
 #include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps14.h>
 #include <linux/mfd/samsung/s5m8763.h>
 #include <linux/mfd/samsung/s5m8767.h>
 #include <linux/regmap.h>
@@ -69,18 +71,53 @@ static const struct mfd_cell s2mps11_devs[] = {
 	}
 };
 
+static const struct mfd_cell s2mps14_devs[] = {
+	{
+		.name = "s2mps14-pmic",
+	}, {
+		.name = "s2mps14-rtc",
+	}, {
+		.name = "s2mps14-clk",
+	}
+};
+
+static const struct mfd_cell s2mpa01_devs[] = {
+	{
+		.name = "s2mpa01-pmic",
+	},
+};
+
 #ifdef CONFIG_OF
 static struct of_device_id sec_dt_match[] = {
 	{	.compatible = "samsung,s5m8767-pmic",
 		.data = (void *)S5M8767X,
-	},
-	{	.compatible = "samsung,s2mps11-pmic",
+	}, {
+		.compatible = "samsung,s2mps11-pmic",
 		.data = (void *)S2MPS11X,
+	}, {
+		.compatible = "samsung,s2mps14-pmic",
+		.data = (void *)S2MPS14X,
+	}, {
+		.compatible = "samsung,s2mpa01-pmic",
+		.data = (void *)S2MPA01,
+	}, {
+		/* Sentinel */
 	},
-	{},
 };
 #endif
 
+static bool s2mpa01_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case S2MPA01_REG_INT1M:
+	case S2MPA01_REG_INT2M:
+	case S2MPA01_REG_INT3M:
+		return false;
+	default:
+		return true;
+	}
+}
+
 static bool s2mps11_volatile(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
@@ -111,6 +148,15 @@ static const struct regmap_config sec_regmap_config = {
 	.val_bits = 8,
 };
 
+static const struct regmap_config s2mpa01_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPA01_REG_LDO_OVCB4,
+	.volatile_reg = s2mpa01_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
 static const struct regmap_config s2mps11_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -120,6 +166,15 @@ static const struct regmap_config s2mps11_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
+static const struct regmap_config s2mps14_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS14_REG_LDODSCH3,
+	.volatile_reg = s2mps11_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
 static const struct regmap_config s5m8763_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -138,9 +193,18 @@ static const struct regmap_config s5m8767_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
-static const struct regmap_config sec_rtc_regmap_config = {
+static const struct regmap_config s5m_rtc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = SEC_RTC_REG_MAX,
+};
+
+static const struct regmap_config s2mps14_rtc_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
+
+	.max_register = S2MPS_RTC_REG_MAX,
 };
 
 #ifdef CONFIG_OF
@@ -180,24 +244,24 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
 }
 #endif
 
-static inline int sec_i2c_get_driver_data(struct i2c_client *i2c,
+static inline unsigned long sec_i2c_get_driver_data(struct i2c_client *i2c,
 						const struct i2c_device_id *id)
 {
 #ifdef CONFIG_OF
 	if (i2c->dev.of_node) {
 		const struct of_device_id *match;
 		match = of_match_node(sec_dt_match, i2c->dev.of_node);
-		return (int)match->data;
+		return (unsigned long)match->data;
 	}
 #endif
-	return (int)id->driver_data;
+	return id->driver_data;
 }
 
 static int sec_pmic_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
 	struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev);
-	const struct regmap_config *regmap;
+	const struct regmap_config *regmap, *regmap_rtc;
 	struct sec_pmic_dev *sec_pmic;
 	int ret;
 
@@ -229,17 +293,34 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 	}
 
 	switch (sec_pmic->device_type) {
+	case S2MPA01:
+		regmap = &s2mpa01_regmap_config;
+		break;
 	case S2MPS11X:
 		regmap = &s2mps11_regmap_config;
+		/*
+		 * The rtc-s5m driver does not support S2MPS11 and there
+		 * is no mfd_cell for S2MPS11 RTC device.
+		 * However we must pass something to devm_regmap_init_i2c()
+		 * so use S5M-like regmap config even though it wouldn't work.
+		 */
+		regmap_rtc = &s5m_rtc_regmap_config;
+		break;
+	case S2MPS14X:
+		regmap = &s2mps14_regmap_config;
+		regmap_rtc = &s2mps14_rtc_regmap_config;
 		break;
 	case S5M8763X:
 		regmap = &s5m8763_regmap_config;
+		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	case S5M8767X:
 		regmap = &s5m8767_regmap_config;
+		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	default:
 		regmap = &sec_regmap_config;
+		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	}
 
@@ -252,10 +333,13 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 	}
 
 	sec_pmic->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
+	if (!sec_pmic->rtc) {
+		dev_err(&i2c->dev, "Failed to allocate I2C for RTC\n");
+		return -ENODEV;
+	}
 	i2c_set_clientdata(sec_pmic->rtc, sec_pmic);
 
-	sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc,
-			&sec_rtc_regmap_config);
+	sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc, regmap_rtc);
 	if (IS_ERR(sec_pmic->regmap_rtc)) {
 		ret = PTR_ERR(sec_pmic->regmap_rtc);
 		dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n",
@@ -283,10 +367,18 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 		ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs,
 				      ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL);
 		break;
+	case S2MPA01:
+		ret = mfd_add_devices(sec_pmic->dev, -1, s2mpa01_devs,
+				      ARRAY_SIZE(s2mpa01_devs), NULL, 0, NULL);
+		break;
 	case S2MPS11X:
 		ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs,
 				      ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL);
 		break;
+	case S2MPS14X:
+		ret = mfd_add_devices(sec_pmic->dev, -1, s2mps14_devs,
+				      ARRAY_SIZE(s2mps14_devs), NULL, 0, NULL);
+		break;
 	default:
 		/* If this happens the probe function is problem */
 		BUG();

drivers/mfd/sec-irq.c

 /*
  * sec-irq.c
  *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
  *
  *  This program is free software; you can redistribute  it and/or modify it
@@ -19,6 +19,7 @@
 #include <linux/mfd/samsung/core.h>
 #include <linux/mfd/samsung/irq.h>
 #include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps14.h>
 #include <linux/mfd/samsung/s5m8763.h>
 #include <linux/mfd/samsung/s5m8767.h>
 
@@ -59,13 +60,13 @@ static const struct regmap_irq s2mps11_irqs[] = {
 		.reg_offset = 1,
 		.mask = S2MPS11_IRQ_RTC60S_MASK,
 	},
-	[S2MPS11_IRQ_RTCA1] = {
+	[S2MPS11_IRQ_RTCA0] = {
 		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTCA1_MASK,
+		.mask = S2MPS11_IRQ_RTCA0_MASK,
 	},
-	[S2MPS11_IRQ_RTCA2] = {
+	[S2MPS11_IRQ_RTCA1] = {
 		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTCA2_MASK,
+		.mask = S2MPS11_IRQ_RTCA1_MASK,
 	},
 	[S2MPS11_IRQ_SMPL] = {
 		.reg_offset = 1,
@@ -89,6 +90,76 @@ static const struct regmap_irq s2mps11_irqs[] = {
 	},
 };
 
+static const struct regmap_irq s2mps14_irqs[] = {
+	[S2MPS14_IRQ_PWRONF] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_PWRONF_MASK,
+	},
+	[S2MPS14_IRQ_PWRONR] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_PWRONR_MASK,
+	},
+	[S2MPS14_IRQ_JIGONBF] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_JIGONBF_MASK,
+	},
+	[S2MPS14_IRQ_JIGONBR] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_JIGONBR_MASK,
+	},
+	[S2MPS14_IRQ_ACOKBF] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_ACOKBF_MASK,
+	},
+	[S2MPS14_IRQ_ACOKBR] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_ACOKBR_MASK,
+	},
+	[S2MPS14_IRQ_PWRON1S] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_PWRON1S_MASK,
+	},
+	[S2MPS14_IRQ_MRB] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_MRB_MASK,
+	},
+	[S2MPS14_IRQ_RTC60S] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTC60S_MASK,
+	},
+	[S2MPS14_IRQ_RTCA1] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTCA1_MASK,
+	},
+	[S2MPS14_IRQ_RTCA0] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTCA0_MASK,
+	},
+	[S2MPS14_IRQ_SMPL] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_SMPL_MASK,
+	},
+	[S2MPS14_IRQ_RTC1S] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTC1S_MASK,
+	},
+	[S2MPS14_IRQ_WTSR] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_WTSR_MASK,
+	},
+	[S2MPS14_IRQ_INT120C] = {
+		.reg_offset = 2,
+		.mask = S2MPS11_IRQ_INT120C_MASK,
+	},
+	[S2MPS14_IRQ_INT140C] = {
+		.reg_offset = 2,
+		.mask = S2MPS11_IRQ_INT140C_MASK,
+	},
+	[S2MPS14_IRQ_TSD] = {
+		.reg_offset = 2,
+		.mask = S2MPS14_IRQ_TSD_MASK,
+	},
+};
 
 static const struct regmap_irq s5m8767_irqs[] = {
 	[S5M8767_IRQ_PWRR] = {
@@ -246,6 +317,16 @@ static const struct regmap_irq_chip s2mps11_irq_chip = {
 	.ack_base = S2MPS11_REG_INT1,
 };
 
+static const struct regmap_irq_chip s2mps14_irq_chip = {
+	.name = "s2mps14",
+	.irqs = s2mps14_irqs,
+	.num_irqs = ARRAY_SIZE(s2mps14_irqs),
+	.num_regs = 3,
+	.status_base = S2MPS14_REG_INT1,
+	.mask_base = S2MPS14_REG_INT1M,
+	.ack_base = S2MPS14_REG_INT1,
+};
+
 static const struct regmap_irq_chip s5m8767_irq_chip = {
 	.name = "s5m8767",
 	.irqs = s5m8767_irqs,
@@ -297,6 +378,12 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 				  sec_pmic->irq_base, &s2mps11_irq_chip,
 				  &sec_pmic->irq_data);
 		break;
+	case S2MPS14X:
+		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
+				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				  sec_pmic->irq_base, &s2mps14_irq_chip,
+				  &sec_pmic->irq_data);
+		break;
 	default:
 		dev_err(sec_pmic->dev, "Unknown device type %d\n",
 			sec_pmic->device_type);

drivers/regulator/Kconfig

@@ -416,6 +416,13 @@ config REGULATOR_RC5T583
 	  through regulator interface. The device supports multiple DCDC/LDO
 	  outputs which can be controlled by i2c communication.
 
+config REGULATOR_S2MPA01
+	tristate "Samsung S2MPA01 voltage regulator"
+	depends on MFD_SEC_CORE
+	help
+	 This driver controls Samsung S2MPA01 voltage output regulator
+	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
+
 config REGULATOR_S2MPS11
 	tristate "Samsung S2MPS11 voltage regulator"
 	depends on MFD_SEC_CORE

drivers/regulator/Makefile

@@ -57,6 +57,7 @@ obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
+obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
 obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o

include/linux/mfd/samsung/core.h

@@ -18,7 +18,9 @@ enum sec_device_type {
 	S5M8751X,
 	S5M8763X,
 	S5M8767X,
+	S2MPA01,
 	S2MPS11X,
+	S2MPS14X,
 };
 
 /**
@@ -50,7 +52,7 @@ struct sec_pmic_dev {
 	struct regmap_irq_chip_data *irq_data;
 
 	int ono;
-	int type;
+	unsigned long type;
 	bool wakeup;
 	bool wtsr_smpl;
 };
@@ -92,7 +94,7 @@ struct sec_platform_data {
 	int				buck3_default_idx;
 	int				buck4_default_idx;
 
-	int                             buck_ramp_delay;
+	int				buck_ramp_delay;
 
 	int				buck2_ramp_delay;
 	int				buck34_ramp_delay;
@@ -100,10 +102,15 @@ struct sec_platform_data {
 	int				buck16_ramp_delay;
 	int				buck7810_ramp_delay;
 	int				buck9_ramp_delay;
-
-	bool                            buck2_ramp_enable;
-	bool                            buck3_ramp_enable;
-	bool                            buck4_ramp_enable;
+	int				buck24_ramp_delay;
+	int				buck3_ramp_delay;
+	int				buck7_ramp_delay;
+	int				buck8910_ramp_delay;
+
+	bool				buck1_ramp_enable;
+	bool				buck2_ramp_enable;
+	bool				buck3_ramp_enable;
+	bool				buck4_ramp_enable;
 	bool				buck6_ramp_enable;
 
 	int				buck2_init;

include/linux/mfd/samsung/irq.h

@@ -13,6 +13,56 @@
 #ifndef __LINUX_MFD_SEC_IRQ_H
 #define __LINUX_MFD_SEC_IRQ_H
 
+enum s2mpa01_irq {
+	S2MPA01_IRQ_PWRONF,
+	S2MPA01_IRQ_PWRONR,
+	S2MPA01_IRQ_JIGONBF,
+	S2MPA01_IRQ_JIGONBR,
+	S2MPA01_IRQ_ACOKBF,
+	S2MPA01_IRQ_ACOKBR,
+	S2MPA01_IRQ_PWRON1S,
+	S2MPA01_IRQ_MRB,
+
+	S2MPA01_IRQ_RTC60S,
+	S2MPA01_IRQ_RTCA1,
+	S2MPA01_IRQ_RTCA0,
+	S2MPA01_IRQ_SMPL,
+	S2MPA01_IRQ_RTC1S,
+	S2MPA01_IRQ_WTSR,
+
+	S2MPA01_IRQ_INT120C,
+	S2MPA01_IRQ_INT140C,
+	S2MPA01_IRQ_LDO3_TSD,
+	S2MPA01_IRQ_B16_TSD,
+	S2MPA01_IRQ_B24_TSD,
+	S2MPA01_IRQ_B35_TSD,
+
+	S2MPA01_IRQ_NR,
+};
+
+#define S2MPA01_IRQ_PWRONF_MASK		(1 << 0)
+#define S2MPA01_IRQ_PWRONR_MASK		(1 << 1)
+#define S2MPA01_IRQ_JIGONBF_MASK	(1 << 2)
+#define S2MPA01_IRQ_JIGONBR_MASK	(1 << 3)
+#define S2MPA01_IRQ_ACOKBF_MASK		(1 << 4)
+#define S2MPA01_IRQ_ACOKBR_MASK		(1 << 5)
+#define S2MPA01_IRQ_PWRON1S_MASK	(1 << 6)
+#define S2MPA01_IRQ_MRB_MASK		(1 << 7)
+
+#define S2MPA01_IRQ_RTC60S_MASK		(1 << 0)
+#define S2MPA01_IRQ_RTCA1_MASK		(1 << 1)
+#define S2MPA01_IRQ_RTCA0_MASK		(1 << 2)
+#define S2MPA01_IRQ_SMPL_MASK		(1 << 3)
+#define S2MPA01_IRQ_RTC1S_MASK		(1 << 4)
+#define S2MPA01_IRQ_WTSR_MASK		(1 << 5)
+
+#define S2MPA01_IRQ_INT120C_MASK	(1 << 0)
+#define S2MPA01_IRQ_INT140C_MASK	(1 << 1)
+#define S2MPA01_IRQ_LDO3_TSD_MASK	(1 << 2)
+#define S2MPA01_IRQ_B16_TSD_MASK	(1 << 3)
+#define S2MPA01_IRQ_B24_TSD_MASK	(1 << 4)
+#define S2MPA01_IRQ_B35_TSD_MASK	(1 << 5)
+
 enum s2mps11_irq {
 	S2MPS11_IRQ_PWRONF,
 	S2MPS11_IRQ_PWRONR,
@@ -24,8 +74,8 @@ enum s2mps11_irq {
 	S2MPS11_IRQ_MRB,
 
 	S2MPS11_IRQ_RTC60S,
+	S2MPS11_IRQ_RTCA0,
 	S2MPS11_IRQ_RTCA1,
-	S2MPS11_IRQ_RTCA2,
 	S2MPS11_IRQ_SMPL,
 	S2MPS11_IRQ_RTC1S,
 	S2MPS11_IRQ_WTSR,
@@ -47,7 +97,7 @@ enum s2mps11_irq {
 
 #define S2MPS11_IRQ_RTC60S_MASK		(1 << 0)
 #define S2MPS11_IRQ_RTCA1_MASK		(1 << 1)
-#define S2MPS11_IRQ_RTCA2_MASK		(1 << 2)
+#define S2MPS11_IRQ_RTCA0_MASK		(1 << 2)
 #define S2MPS11_IRQ_SMPL_MASK		(1 << 3)
 #define S2MPS11_IRQ_RTC1S_MASK		(1 << 4)
 #define S2MPS11_IRQ_WTSR_MASK		(1 << 5)
@@ -55,6 +105,33 @@ enum s2mps11_irq {
 #define S2MPS11_IRQ_INT120C_MASK	(1 << 0)
 #define S2MPS11_IRQ_INT140C_MASK	(1 << 1)
 
+enum s2mps14_irq {
+	S2MPS14_IRQ_PWRONF,
+	S2MPS14_IRQ_PWRONR,
+	S2MPS14_IRQ_JIGONBF,
+	S2MPS14_IRQ_JIGONBR,
+	S2MPS14_IRQ_ACOKBF,
+	S2MPS14_IRQ_ACOKBR,
+	S2MPS14_IRQ_PWRON1S,
+	S2MPS14_IRQ_MRB,
+
+	S2MPS14_IRQ_RTC60S,
+	S2MPS14_IRQ_RTCA1,
+	S2MPS14_IRQ_RTCA0,
+	S2MPS14_IRQ_SMPL,
+	S2MPS14_IRQ_RTC1S,
+	S2MPS14_IRQ_WTSR,
+
+	S2MPS14_IRQ_INT120C,
+	S2MPS14_IRQ_INT140C,
+	S2MPS14_IRQ_TSD,
+
+	S2MPS14_IRQ_NR,
+};
+
+/* Masks for interrupts are the same as in s2mps11 */
+#define S2MPS14_IRQ_TSD_MASK		(1 << 2)
+
 enum s5m8767_irq {
 	S5M8767_IRQ_PWRR,
 	S5M8767_IRQ_PWRF,

include/linux/mfd/samsung/rtc.h

-/*  rtc.h
+/* rtc.h
  *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
  *
  */
 
@@ -43,6 +48,39 @@ enum sec_rtc_reg {
 	SEC_RTC_STATUS,
 	SEC_WTSR_SMPL_CNTL,
 	SEC_RTC_UDR_CON,
+
+	SEC_RTC_REG_MAX,
+};
+
+enum s2mps_rtc_reg {
+	S2MPS_RTC_CTRL,
+	S2MPS_WTSR_SMPL_CNTL,
+	S2MPS_RTC_UDR_CON,
+	S2MPS_RSVD,
+	S2MPS_RTC_SEC,
+	S2MPS_RTC_MIN,
+	S2MPS_RTC_HOUR,
+	S2MPS_RTC_WEEKDAY,
+	S2MPS_RTC_DATE,
+	S2MPS_RTC_MONTH,
+	S2MPS_RTC_YEAR,
+	S2MPS_ALARM0_SEC,
+	S2MPS_ALARM0_MIN,
+	S2MPS_ALARM0_HOUR,
+	S2MPS_ALARM0_WEEKDAY,
+	S2MPS_ALARM0_DATE,
+	S2MPS_ALARM0_MONTH,
+	S2MPS_ALARM0_YEAR,
+	S2MPS_ALARM1_SEC,
+	S2MPS_ALARM1_MIN,
+	S2MPS_ALARM1_HOUR,
+	S2MPS_ALARM1_WEEKDAY,
+	S2MPS_ALARM1_DATE,
+	S2MPS_ALARM1_MONTH,
+	S2MPS_ALARM1_YEAR,
+	S2MPS_OFFSRC,
+
+	S2MPS_RTC_REG_MAX,
 };
 
 #define RTC_I2C_ADDR		(0x0C >> 1)
@@ -54,6 +92,9 @@ enum sec_rtc_reg {
 #define ALARM1_STATUS		(1 << 2)
 #define UPDATE_AD		(1 << 0)
 
+#define S2MPS_ALARM0_STATUS	(1 << 2)
+#define S2MPS_ALARM1_STATUS	(1 << 1)
+
 /* RTC Control Register */
 #define BCD_EN_SHIFT		0
 #define BCD_EN_MASK		(1 << BCD_EN_SHIFT)
@@ -62,6 +103,10 @@ enum sec_rtc_reg {
 /* RTC Update Register1 */
 #define RTC_UDR_SHIFT		0
 #define RTC_UDR_MASK		(1 << RTC_UDR_SHIFT)
+#define S2MPS_RTC_WUDR_SHIFT	4
+#define S2MPS_RTC_WUDR_MASK	(1 << S2MPS_RTC_WUDR_SHIFT)
+#define S2MPS_RTC_RUDR_SHIFT	0
+#define S2MPS_RTC_RUDR_MASK	(1 << S2MPS_RTC_RUDR_SHIFT)
 #define RTC_TCON_SHIFT		1
 #define RTC_TCON_MASK		(1 << RTC_TCON_SHIFT)
 #define RTC_TIME_EN_SHIFT	3

include/linux/mfd/samsung/s2mpa01.h

+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd
+ *		http://www.samsung.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_S2MPA01_H
+#define __LINUX_MFD_S2MPA01_H
+
+/* S2MPA01 registers */
+enum s2mpa01_reg {
+	S2MPA01_REG_ID,
+	S2MPA01_REG_INT1,
+	S2MPA01_REG_INT2,
+	S2MPA01_REG_INT3,
+	S2MPA01_REG_INT1M,
+	S2MPA01_REG_INT2M,
+	S2MPA01_REG_INT3M,
+	S2MPA01_REG_ST1,
+	S2MPA01_REG_ST2,
+	S2MPA01_REG_PWRONSRC,
+	S2MPA01_REG_OFFSRC,
+	S2MPA01_REG_RTC_BUF,
+	S2MPA01_REG_CTRL1,
+	S2MPA01_REG_ETC_TEST,
+	S2MPA01_REG_RSVD1,
+	S2MPA01_REG_BU_CHG,
+	S2MPA01_REG_RAMP1,
+	S2MPA01_REG_RAMP2,
+	S2MPA01_REG_LDO_DSCH1,
+	S2MPA01_REG_LDO_DSCH2,
+	S2MPA01_REG_LDO_DSCH3,
+	S2MPA01_REG_LDO_DSCH4,
+	S2MPA01_REG_OTP_ADRL,
+	S2MPA01_REG_OTP_ADRH,
+	S2MPA01_REG_OTP_DATA,
+	S2MPA01_REG_MON1SEL,
+	S2MPA01_REG_MON2SEL,
+	S2MPA01_REG_LEE,
+	S2MPA01_REG_RSVD2,
+	S2MPA01_REG_RSVD3,
+	S2MPA01_REG_RSVD4,
+	S2MPA01_REG_RSVD5,
+	S2MPA01_REG_RSVD6,
+	S2MPA01_REG_TOP_RSVD,
+	S2MPA01_REG_DVS_SEL,
+	S2MPA01_REG_DVS_PTR,
+	S2MPA01_REG_DVS_DATA,
+	S2MPA01_REG_RSVD_NO,
+	S2MPA01_REG_UVLO,
+	S2MPA01_REG_LEE_NO,
+	S2MPA01_REG_B1CTRL1,
+	S2MPA01_REG_B1CTRL2,
+	S2MPA01_REG_B2CTRL1,
+	S2MPA01_REG_B2CTRL2,
+	S2MPA01_REG_B3CTRL1,
+	S2MPA01_REG_B3CTRL2,
+	S2MPA01_REG_B4CTRL1,
+	S2MPA01_REG_B4CTRL2,
+	S2MPA01_REG_B5CTRL1,
+	S2MPA01_REG_B5CTRL2,
+	S2MPA01_REG_B5CTRL3,
+	S2MPA01_REG_B5CTRL4,
+	S2MPA01_REG_B5CTRL5,
+	S2MPA01_REG_B5CTRL6,
+	S2MPA01_REG_B6CTRL1,
+	S2MPA01_REG_B6CTRL2,
+	S2MPA01_REG_B7CTRL1,
+	S2MPA01_REG_B7CTRL2,
+	S2MPA01_REG_B8CTRL1,
+	S2MPA01_REG_B8CTRL2,
+	S2MPA01_REG_B9CTRL1,
+	S2MPA01_REG_B9CTRL2,
+	S2MPA01_REG_B10CTRL1,
+	S2MPA01_REG_B10CTRL2,
+	S2MPA01_REG_L1CTRL,
+	S2MPA01_REG_L2CTRL,
+	S2MPA01_REG_L3CTRL,
+	S2MPA01_REG_L4CTRL,
+	S2MPA01_REG_L5CTRL,
+	S2MPA01_REG_L6CTRL,
+	S2MPA01_REG_L7CTRL,
+	S2MPA01_REG_L8CTRL,
+	S2MPA01_REG_L9CTRL,
+	S2MPA01_REG_L10CTRL,
+	S2MPA01_REG_L11CTRL,
+	S2MPA01_REG_L12CTRL,
+	S2MPA01_REG_L13CTRL,
+	S2MPA01_REG_L14CTRL,
+	S2MPA01_REG_L15CTRL,
+	S2MPA01_REG_L16CTRL,
+	S2MPA01_REG_L17CTRL,
+	S2MPA01_REG_L18CTRL,
+	S2MPA01_REG_L19CTRL,
+	S2MPA01_REG_L20CTRL,
+	S2MPA01_REG_L21CTRL,
+	S2MPA01_REG_L22CTRL,
+	S2MPA01_REG_L23CTRL,
+	S2MPA01_REG_L24CTRL,
+	S2MPA01_REG_L25CTRL,
+	S2MPA01_REG_L26CTRL,
+
+	S2MPA01_REG_LDO_OVCB1,
+	S2MPA01_REG_LDO_OVCB2,
+	S2MPA01_REG_LDO_OVCB3,
+	S2MPA01_REG_LDO_OVCB4,
+
+};
+
+/* S2MPA01 regulator ids */
+enum s2mpa01_regulators {
+	S2MPA01_LDO1,
+	S2MPA01_LDO2,
+	S2MPA01_LDO3,
+	S2MPA01_LDO4,
+	S2MPA01_LDO5,
+	S2MPA01_LDO6,
+	S2MPA01_LDO7,
+	S2MPA01_LDO8,
+	S2MPA01_LDO9,
+	S2MPA01_LDO10,
+	S2MPA01_LDO11,
+	S2MPA01_LDO12,
+	S2MPA01_LDO13,
+	S2MPA01_LDO14,
+	S2MPA01_LDO15,
+	S2MPA01_LDO16,
+	S2MPA01_LDO17,
+	S2MPA01_LDO18,
+	S2MPA01_LDO19,
+	S2MPA01_LDO20,
+	S2MPA01_LDO21,
+	S2MPA01_LDO22,
+	S2MPA01_LDO23,
+	S2MPA01_LDO24,
+	S2MPA01_LDO25,
+	S2MPA01_LDO26,
+
+	S2MPA01_BUCK1,
+	S2MPA01_BUCK2,
+	S2MPA01_BUCK3,
+	S2MPA01_BUCK4,
+	S2MPA01_BUCK5,
+	S2MPA01_BUCK6,
+	S2MPA01_BUCK7,
+	S2MPA01_BUCK8,
+	S2MPA01_BUCK9,
+	S2MPA01_BUCK10,
+
+	S2MPA01_REGULATOR_MAX,
+};
+
+#define S2MPA01_BUCK_MIN1	600000
+#define S2MPA01_BUCK_MIN2	800000
+#define S2MPA01_BUCK_MIN3	1000000
+#define S2MPA01_BUCK_MIN4	1500000
+#define S2MPA01_LDO_MIN		800000
+
+#define S2MPA01_BUCK_STEP1	6250
+#define S2MPA01_BUCK_STEP2	12500
+
+#define S2MPA01_LDO_STEP1	50000
+#define S2MPA01_LDO_STEP2	25000
+
+#define S2MPA01_LDO_VSEL_MASK	0x3F
+#define S2MPA01_BUCK_VSEL_MASK	0xFF
+#define S2MPA01_ENABLE_MASK	(0x03 << S2MPA01_ENABLE_SHIFT)
+#define S2MPA01_ENABLE_SHIFT	0x06
+#define S2MPA01_LDO_N_VOLTAGES	(S2MPA01_LDO_VSEL_MASK + 1)
+#define S2MPA01_BUCK_N_VOLTAGES (S2MPA01_BUCK_VSEL_MASK + 1)
+
+#define S2MPA01_RAMP_DELAY	12500	/* uV/us */
+
+#define S2MPA01_BUCK16_RAMP_SHIFT	4
+#define S2MPA01_BUCK24_RAMP_SHIFT	6
+#define S2MPA01_BUCK3_RAMP_SHIFT	4
+#define S2MPA01_BUCK5_RAMP_SHIFT	6
+#define S2MPA01_BUCK7_RAMP_SHIFT	2
+#define S2MPA01_BUCK8910_RAMP_SHIFT	0
+
+#define S2MPA01_BUCK1_RAMP_EN_SHIFT	3
+#define S2MPA01_BUCK2_RAMP_EN_SHIFT	2
+#define S2MPA01_BUCK3_RAMP_EN_SHIFT	1
+#define S2MPA01_BUCK4_RAMP_EN_SHIFT	0
+#define S2MPA01_PMIC_EN_SHIFT	6
+
+#endif /*__LINUX_MFD_S2MPA01_H */

include/linux/mfd/samsung/s2mps14.h

+/*
+ * s2mps14.h
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ *              http://www.samsung.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_MFD_S2MPS14_H
+#define __LINUX_MFD_S2MPS14_H
+
+/* S2MPS14 registers */
+enum s2mps14_reg {
+	S2MPS14_REG_ID,
+	S2MPS14_REG_INT1,
+	S2MPS14_REG_INT2,
+	S2MPS14_REG_INT3,
+	S2MPS14_REG_INT1M,
+	S2MPS14_REG_INT2M,
+	S2MPS14_REG_INT3M,
+	S2MPS14_REG_ST1,
+	S2MPS14_REG_ST2,
+	S2MPS14_REG_PWRONSRC,
+	S2MPS14_REG_OFFSRC,
+	S2MPS14_REG_BU_CHG,
+	S2MPS14_REG_RTCCTRL,
+	S2MPS14_REG_CTRL1,
+	S2MPS14_REG_CTRL2,
+	S2MPS14_REG_RSVD1,
+	S2MPS14_REG_RSVD2,
+	S2MPS14_REG_RSVD3,
+	S2MPS14_REG_RSVD4,
+	S2MPS14_REG_RSVD5,
+	S2MPS14_REG_RSVD6,
+	S2MPS14_REG_CTRL3,
+	S2MPS14_REG_RSVD7,
+	S2MPS14_REG_RSVD8,
+	S2MPS14_REG_WRSTBI,
+	S2MPS14_REG_B1CTRL1,
+	S2MPS14_REG_B1CTRL2,
+	S2MPS14_REG_B2CTRL1,
+	S2MPS14_REG_B2CTRL2,
+	S2MPS14_REG_B3CTRL1,
+	S2MPS14_REG_B3CTRL2,
+	S2MPS14_REG_B4CTRL1,
+	S2MPS14_REG_B4CTRL2,
+	S2MPS14_REG_B5CTRL1,
+	S2MPS14_REG_B5CTRL2,
+	S2MPS14_REG_L1CTRL,
+	S2MPS14_REG_L2CTRL,
+	S2MPS14_REG_L3CTRL,
+	S2MPS14_REG_L4CTRL,
+	S2MPS14_REG_L5CTRL,
+	S2MPS14_REG_L6CTRL,
+	S2MPS14_REG_L7CTRL,
+	S2MPS14_REG_L8CTRL,
+	S2MPS14_REG_L9CTRL,
+	S2MPS14_REG_L10CTRL,
+	S2MPS14_REG_L11CTRL,
+	S2MPS14_REG_L12CTRL,
+	S2MPS14_REG_L13CTRL,
+	S2MPS14_REG_L14CTRL,
+	S2MPS14_REG_L15CTRL,
+	S2MPS14_REG_L16CTRL,
+	S2MPS14_REG_L17CTRL,
+	S2MPS14_REG_L18CTRL,
+	S2MPS14_REG_L19CTRL,
+	S2MPS14_REG_L20CTRL,
+	S2MPS14_REG_L21CTRL,
+	S2MPS14_REG_L22CTRL,
+	S2MPS14_REG_L23CTRL,
+	S2MPS14_REG_L24CTRL,
+	S2MPS14_REG_L25CTRL,
+	S2MPS14_REG_LDODSCH1,
+	S2MPS14_REG_LDODSCH2,
+	S2MPS14_REG_LDODSCH3,
+};
+
+/* S2MPS14 regulator ids */
+enum s2mps14_regulators {
+	S2MPS14_LDO1,
+	S2MPS14_LDO2,
+	S2MPS14_LDO3,
+	S2MPS14_LDO4,
+	S2MPS14_LDO5,
+	S2MPS14_LDO6,
+	S2MPS14_LDO7,
+	S2MPS14_LDO8,
+	S2MPS14_LDO9,
+	S2MPS14_LDO10,
+	S2MPS14_LDO11,
+	S2MPS14_LDO12,
+	S2MPS14_LDO13,
+	S2MPS14_LDO14,
+	S2MPS14_LDO15,
+	S2MPS14_LDO16,
+	S2MPS14_LDO17,
+	S2MPS14_LDO18,
+	S2MPS14_LDO19,
+	S2MPS14_LDO20,
+	S2MPS14_LDO21,
+	S2MPS14_LDO22,
+	S2MPS14_LDO23,
+	S2MPS14_LDO24,
+	S2MPS14_LDO25,
+	S2MPS14_BUCK1,
+	S2MPS14_BUCK2,
+	S2MPS14_BUCK3,
+	S2MPS14_BUCK4,
+	S2MPS14_BUCK5,
+
+	S2MPS14_REGULATOR_MAX,
+};
+
+/* Regulator constraints for BUCKx */
+#define S2MPS14_BUCK1235_MIN_600MV	600000
+#define S2MPS14_BUCK4_MIN_1400MV	1400000
+#define S2MPS14_BUCK1235_STEP_6_25MV	6250
+#define S2MPS14_BUCK4_STEP_12_5MV	12500
+#define S2MPS14_BUCK1235_START_SEL	0x20
+#define S2MPS14_BUCK4_START_SEL		0x40
+/*
+ * Default ramp delay in uv/us. Datasheet says that ramp delay can be
+ * controlled however it does not specify which register is used for that.
+ * Let's assume that default value will be set.
+ */
+#define S2MPS14_BUCK_RAMP_DELAY		12500
+
+/* Regulator constraints for different types of LDOx */
+#define S2MPS14_LDO_MIN_800MV		800000
+#define S2MPS14_LDO_MIN_1800MV		1800000
+#define S2MPS14_LDO_STEP_12_5MV		12500
+#define S2MPS14_LDO_STEP_25MV		25000
+
+#define S2MPS14_LDO_VSEL_MASK		0x3F
+#define S2MPS14_BUCK_VSEL_MASK		0xFF
+#define S2MPS14_ENABLE_MASK		(0x03 << S2MPS14_ENABLE_SHIFT)
+#define S2MPS14_ENABLE_SHIFT		6
+#define S2MPS14_LDO_N_VOLTAGES		(S2MPS14_LDO_VSEL_MASK + 1)
+#define S2MPS14_BUCK_N_VOLTAGES		(S2MPS14_BUCK_VSEL_MASK + 1)
+
+#endif /*  __LINUX_MFD_S2MPS14_H */