Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal management update from Zhang Rui:
 "Highlights:

   - Introduction of thermal policy support, together with three new
     thermal governors, including step_wise, user_space, fire_share.

   - Introduction of ST-Ericsson db8500_thermal driver and ST-Ericsson
     db8500_cpufreq_cooling driver.

   - Thermal Kconfig file and Makefile refactor.

   - Fixes for generic thermal layer, generic cpucooling, rcar thermal
     driver and Exynos thermal driver."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits)
  Thermal: Fix DEFAULT_THERMAL_GOVERNOR
  Thermal: fix a NULL pointer dereference when generic thermal layer is built as a module
  thermal: rcar: add rcar_zone_to_priv() macro
  thermal: rcar: fixup the unit of temperature
  thermal: cpu cooling: allow module builds
  thermal: cpu cooling: use const parameter while registering
  Thermal: Add ST-Ericsson DB8500 thermal properties and platform data.
  Thermal: Add ST-Ericsson DB8500 thermal driver.
  drivers/thermal/Makefile refactor
  Exynos: Add missing dependency
  Refactor drivers/thermal/Kconfig
  thermal: cpu_cooling: Make 'notify_device' static
  Thermal: Remove the cooling_cpufreq_list.
  Thermal: fix bug of counting cpu frequencies.
  Thermal: add indent for code alignment.
  thermal: rcar_thermal: remove explicitly used devm_kfree/iounap()
  thermal: user_space: Add missing static storage class specifiers
  thermal: fair_share: Add missing static storage class specifiers
  thermal: step_wise: Add missing static storage class specifiers
  Thermal: Fix oops and unlocking in thermal_sys.c
  ...

Documentation/devicetree/bindings/thermal/db8500-thermal.txt

+* ST-Ericsson DB8500 Thermal
+
+** Thermal node properties:
+
+- compatible : "stericsson,db8500-thermal";
+- reg : address range of the thermal sensor registers;
+- interrupts : interrupts generated from PRCMU;
+- interrupt-names : "IRQ_HOTMON_LOW" and "IRQ_HOTMON_HIGH";
+- num-trips : number of total trip points, this is required, set it 0 if none,
+  if greater than 0, the following properties must be defined;
+- tripN-temp : temperature of trip point N, should be in ascending order;
+- tripN-type : type of trip point N, should be one of "active" "passive" "hot"
+  "critical";
+- tripN-cdev-num : number of the cooling devices which can be bound to trip
+  point N, this is required if trip point N is defined, set it 0 if none,
+  otherwise the following cooling device names must be defined;
+- tripN-cdev-nameM : name of the No. M cooling device of trip point N;
+
+Usually the num-trips and tripN-*** are separated in board related dts files.
+
+Example:
+thermal@801573c0 {
+	compatible = "stericsson,db8500-thermal";
+	reg = <0x801573c0 0x40>;
+	interrupts = <21 0x4>, <22 0x4>;
+	interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
+
+	num-trips = <3>;
+
+	trip0-temp = <75000>;
+	trip0-type = "active";
+	trip0-cdev-num = <1>;
+	trip0-cdev-name0 = "thermal-cpufreq-0";
+
+	trip1-temp = <80000>;
+	trip1-type = "active";
+	trip1-cdev-num = <2>;
+	trip1-cdev-name0 = "thermal-cpufreq-0";
+	trip1-cdev-name1 = "thermal-fan";
+
+	trip2-temp = <85000>;
+	trip2-type = "critical";
+	trip2-cdev-num = <0>;
+}

Documentation/thermal/sysfs-api.txt

@@ -112,6 +112,29 @@ temperature) and throttle appropriate devices.
     trip: indicates which trip point the cooling devices is associated with
 	  in this thermal zone.
 
+1.4 Thermal Zone Parameters
+1.4.1 struct thermal_bind_params
+    This structure defines the following parameters that are used to bind
+    a zone with a cooling device for a particular trip point.
+    .cdev: The cooling device pointer
+    .weight: The 'influence' of a particular cooling device on this zone.
+             This is on a percentage scale. The sum of all these weights
+             (for a particular zone) cannot exceed 100.
+    .trip_mask:This is a bit mask that gives the binding relation between
+               this thermal zone and cdev, for a particular trip point.
+               If nth bit is set, then the cdev and thermal zone are bound
+               for trip point n.
+    .match: This call back returns success(0) if the 'tz and cdev' need to
+	    be bound, as per platform data.
+1.4.2 struct thermal_zone_params
+    This structure defines the platform level parameters for a thermal zone.
+    This data, for each thermal zone should come from the platform layer.
+    This is an optional feature where some platforms can choose not to
+    provide this data.
+    .governor_name: Name of the thermal governor used for this zone
+    .num_tbps: Number of thermal_bind_params entries for this zone
+    .tbp: thermal_bind_params entries
+
 2. sysfs attributes structure
 
 RO	read only value
@@ -126,6 +149,7 @@ Thermal zone device sys I/F, created once it's registered:
     |---type:			Type of the thermal zone
     |---temp:			Current temperature
     |---mode:			Working mode of the thermal zone
+    |---policy:			Thermal governor used for this zone
     |---trip_point_[0-*]_temp:	Trip point temperature
     |---trip_point_[0-*]_type:	Trip point type
     |---trip_point_[0-*]_hyst:	Hysteresis value for this trip point
@@ -187,6 +211,10 @@ mode
 			  charge of the thermal management.
 	RW, Optional
 
+policy
+	One of the various thermal governors used for a particular zone.
+	RW, Required
+
 trip_point_[0-*]_temp
 	The temperature above which trip point will be fired.
 	Unit: millidegree Celsius
@@ -264,6 +292,7 @@ method, the sys I/F structure will be built like this:
     |---type:			acpitz
     |---temp:			37000
     |---mode:			enabled
+    |---policy:			step_wise
     |---trip_point_0_temp:	100000
     |---trip_point_0_type:	critical
     |---trip_point_1_temp:	80000
@@ -305,3 +334,38 @@ to a thermal_zone_device when it registers itself with the framework. The
 event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL,
 THERMAL_DEV_FAULT}. Notification can be sent when the current temperature
 crosses any of the configured thresholds.
+
+5. Export Symbol APIs:
+
+5.1: get_tz_trend:
+This function returns the trend of a thermal zone, i.e the rate of change
+of temperature of the thermal zone. Ideally, the thermal sensor drivers
+are supposed to implement the callback. If they don't, the thermal
+framework calculated the trend by comparing the previous and the current
+temperature values.
+
+5.2:get_thermal_instance:
+This function returns the thermal_instance corresponding to a given
+{thermal_zone, cooling_device, trip_point} combination. Returns NULL
+if such an instance does not exist.
+
+5.3:notify_thermal_framework:
+This function handles the trip events from sensor drivers. It starts
+throttling the cooling devices according to the policy configured.
+For CRITICAL and HOT trip points, this notifies the respective drivers,
+and does actual throttling for other trip points i.e ACTIVE and PASSIVE.
+The throttling policy is based on the configured platform data; if no
+platform data is provided, this uses the step_wise throttling policy.
+
+5.4:thermal_cdev_update:
+This function serves as an arbitrator to set the state of a cooling
+device. It sets the cooling device to the deepest cooling state if
+possible.
+
+5.5:thermal_register_governor:
+This function lets the various thermal governors to register themselves
+with the Thermal framework. At run time, depending on a zone's platform
+data, a particular governor is used for throttling.
+
+5.6:thermal_unregister_governor:
+This function unregisters a governor from the thermal framework.

arch/arm/boot/dts/dbx5x0.dtsi

@@ -203,6 +203,14 @@ prcmu-timer-4@80157450 {
 				reg = <0x80157450 0xC>;
 			};
 
+			thermal@801573c0 {
+				compatible = "stericsson,db8500-thermal";
+				reg = <0x801573c0 0x40>;
+				interrupts = <21 0x4>, <22 0x4>;
+				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
+				status = "disabled";
+			 };
+
 			db8500-prcmu-regulators {
 				compatible = "stericsson,db8500-prcmu-regulator";
 
@@ -660,5 +668,11 @@ external-bus@50000000 {
 			ranges = <0 0x50000000 0x4000000>;
 			status = "disabled";
 		};
+
+		cpufreq-cooling {
+			compatible = "stericsson,db8500-cpufreq-cooling";
+			status = "disabled";
+		 };
+
 	};
 };

arch/arm/boot/dts/snowball.dts

@@ -99,6 +99,33 @@ msp3: msp@80125000 {
 			status = "okay";
 		};
 
+		prcmu@80157000 {
+			thermal@801573c0 {
+				num-trips = <4>;
+
+				trip0-temp = <70000>;
+				trip0-type = "active";
+				trip0-cdev-num = <1>;
+				trip0-cdev-name0 = "thermal-cpufreq-0";
+
+				trip1-temp = <75000>;
+				trip1-type = "active";
+				trip1-cdev-num = <1>;
+				trip1-cdev-name0 = "thermal-cpufreq-0";
+
+				trip2-temp = <80000>;
+				trip2-type = "active";
+				trip2-cdev-num = <1>;
+				trip2-cdev-name0 = "thermal-cpufreq-0";
+
+				trip3-temp = <85000>;
+				trip3-type = "critical";
+				trip3-cdev-num = <0>;
+
+				status = "okay";
+			 };
+		};
+
 		external-bus@50000000 {
 			status = "okay";
 
@@ -183,5 +210,9 @@ bh1780@0x29 {
 				reg = <0x33>;
 			};
 		};
+
+		cpufreq-cooling {
+			status = "okay";
+		};
 	};
 };

arch/arm/configs/u8500_defconfig

@@ -69,6 +69,8 @@ CONFIG_GPIO_TC3589X=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_AB8500_BM=y
 CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
+CONFIG_THERMAL=y
+CONFIG_CPU_THERMAL=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
 CONFIG_AB5500_CORE=y

arch/arm/mach-ux500/board-mop500.c

@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-nomadik.h>
+#include <linux/platform_data/db8500_thermal.h>
 #include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
@@ -228,6 +229,67 @@ static struct ab8500_platform_data ab8500_platdata = {
 	.codec		= &ab8500_codec_pdata,
 };
 
+/*
+ * Thermal Sensor
+ */
+
+static struct resource db8500_thsens_resources[] = {
+	{
+		.name = "IRQ_HOTMON_LOW",
+		.start  = IRQ_PRCMU_HOTMON_LOW,
+		.end    = IRQ_PRCMU_HOTMON_LOW,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.name = "IRQ_HOTMON_HIGH",
+		.start  = IRQ_PRCMU_HOTMON_HIGH,
+		.end    = IRQ_PRCMU_HOTMON_HIGH,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct db8500_thsens_platform_data db8500_thsens_data = {
+	.trip_points[0] = {
+		.temp = 70000,
+		.type = THERMAL_TRIP_ACTIVE,
+		.cdev_name = {
+			[0] = "thermal-cpufreq-0",
+		},
+	},
+	.trip_points[1] = {
+		.temp = 75000,
+		.type = THERMAL_TRIP_ACTIVE,
+		.cdev_name = {
+			[0] = "thermal-cpufreq-0",
+		},
+	},
+	.trip_points[2] = {
+		.temp = 80000,
+		.type = THERMAL_TRIP_ACTIVE,
+		.cdev_name = {
+			[0] = "thermal-cpufreq-0",
+		},
+	},
+	.trip_points[3] = {
+		.temp = 85000,
+		.type = THERMAL_TRIP_CRITICAL,
+	},
+	.num_trips = 4,
+};
+
+static struct platform_device u8500_thsens_device = {
+	.name           = "db8500-thermal",
+	.resource       = db8500_thsens_resources,
+	.num_resources  = ARRAY_SIZE(db8500_thsens_resources),
+	.dev	= {
+		.platform_data	= &db8500_thsens_data,
+	},
+};
+
+static struct platform_device u8500_cpufreq_cooling_device = {
+	.name           = "db8500-cpufreq-cooling",
+};
+
 /*
  * TPS61052
  */
@@ -583,6 +645,8 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 	&snowball_key_dev,
 	&snowball_sbnet_dev,
 	&snowball_gpio_en_3v3_regulator_dev,
+	&u8500_thsens_device,
+	&u8500_cpufreq_cooling_device,
 };
 
 static void __init mop500_init_machine(void)

drivers/acpi/thermal.c

@@ -900,14 +900,14 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
 	if (tz->trips.passive.flags.valid)
 		tz->thermal_zone =
 			thermal_zone_device_register("acpitz", trips, 0, tz,
-						     &acpi_thermal_zone_ops,
+						&acpi_thermal_zone_ops, NULL,
 						     tz->trips.passive.tsp*100,
 						     tz->polling_frequency*100);
 	else
 		tz->thermal_zone =
 			thermal_zone_device_register("acpitz", trips, 0, tz,
-						     &acpi_thermal_zone_ops, 0,
-						     tz->polling_frequency*100);
+						&acpi_thermal_zone_ops, NULL,
+						0, tz->polling_frequency*100);
 	if (IS_ERR(tz->thermal_zone))
 		return -ENODEV;
 

drivers/platform/x86/acerhdf.c

@@ -662,7 +662,7 @@ static int acerhdf_register_thermal(void)
 		return -EINVAL;
 
 	thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL,
-					      &acerhdf_dev_ops, 0,
+					      &acerhdf_dev_ops, NULL, 0,
 					      (kernelmode) ? interval*1000 : 0);
 	if (IS_ERR(thz_dev))
 		return -EINVAL;

drivers/platform/x86/intel_mid_thermal.c

@@ -502,7 +502,7 @@ static int mid_thermal_probe(struct platform_device *pdev)
 			goto err;
 		}
 		pinfo->tzd[i] = thermal_zone_device_register(name[i],
-				0, 0, td_info, &tzd_ops, 0, 0);
+				0, 0, td_info, &tzd_ops, NULL, 0, 0);
 		if (IS_ERR(pinfo->tzd[i])) {
 			kfree(td_info);
 			ret = PTR_ERR(pinfo->tzd[i]);

drivers/power/power_supply_core.c

@@ -201,7 +201,7 @@ static int psy_register_thermal(struct power_supply *psy)
 	for (i = 0; i < psy->num_properties; i++) {
 		if (psy->properties[i] == POWER_SUPPLY_PROP_TEMP) {
 			psy->tzd = thermal_zone_device_register(psy->name, 0, 0,
-					psy, &psy_tzd_ops, 0, 0);
+					psy, &psy_tzd_ops, NULL, 0, 0);
 			if (IS_ERR(psy->tzd))
 				return PTR_ERR(psy->tzd);
 			break;

drivers/staging/omap-thermal/omap-thermal-common.c

@@ -270,7 +270,7 @@ int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
 	/* Create thermal zone */
 	data->omap_thermal = thermal_zone_device_register(domain,
 				OMAP_TRIP_NUMBER, 0, data, &omap_thermal_ops,
-				FAST_TEMP_MONITORING_RATE,
+				NULL, FAST_TEMP_MONITORING_RATE,
 				FAST_TEMP_MONITORING_RATE);
 	if (IS_ERR_OR_NULL(data->omap_thermal)) {
 		dev_err(bg_ptr->dev, "thermal zone device is NULL\n");

drivers/thermal/Kconfig

@@ -13,15 +13,62 @@ menuconfig THERMAL
 	  All platforms with ACPI thermal support can use this driver.
 	  If you want this support, you should say Y or M here.
 
+if THERMAL
+
 config THERMAL_HWMON
 	bool
-	depends on THERMAL
 	depends on HWMON=y || HWMON=THERMAL
 	default y
 
+choice
+	prompt "Default Thermal governor"
+	default THERMAL_DEFAULT_GOV_STEP_WISE
+	help
+	  This option sets which thermal governor shall be loaded at
+	  startup. If in doubt, select 'step_wise'.
+
+config THERMAL_DEFAULT_GOV_STEP_WISE
+	bool "step_wise"
+	select STEP_WISE
+	help
+	  Use the step_wise governor as default. This throttles the
+	  devices one step at a time.
+
+config THERMAL_DEFAULT_GOV_FAIR_SHARE
+	bool "fair_share"
+	select FAIR_SHARE
+	help
+	  Use the fair_share governor as default. This throttles the
+	  devices based on their 'contribution' to a zone. The
+	  contribution should be provided through platform data.
+
+config THERMAL_DEFAULT_GOV_USER_SPACE
+	bool "user_space"
+	select USER_SPACE
+	help
+	  Select this if you want to let the user space manage the
+	  lpatform thermals.
+
+endchoice
+
+config FAIR_SHARE
+	bool "Fair-share thermal governor"
+	help
+	  Enable this to manage platform thermals using fair-share governor.
+
+config STEP_WISE
+	bool "Step_wise thermal governor"
+	help
+	  Enable this to manage platform thermals using a simple linear
+
+config USER_SPACE
+	bool "User_space thermal governor"
+	help
+	  Enable this to let the user space manage the platform thermals.
+
 config CPU_THERMAL
-	bool "generic cpu cooling support"
-	depends on THERMAL && CPU_FREQ
+	tristate "generic cpu cooling support"
+	depends on CPU_FREQ
 	select CPU_FREQ_TABLE
 	help
 	  This implements the generic cpu cooling mechanism through frequency
@@ -33,7 +80,6 @@ config CPU_THERMAL
 
 config SPEAR_THERMAL
 	bool "SPEAr thermal sensor driver"
-	depends on THERMAL
 	depends on PLAT_SPEAR
 	depends on OF
 	help
@@ -42,7 +88,6 @@ config SPEAR_THERMAL
 
 config RCAR_THERMAL
 	tristate "Renesas R-Car thermal driver"
-	depends on THERMAL
 	depends on ARCH_SHMOBILE
 	help
 	  Enable this to plug the R-Car thermal sensor driver into the Linux
@@ -50,8 +95,31 @@ config RCAR_THERMAL
 
 config EXYNOS_THERMAL
 	tristate "Temperature sensor on Samsung EXYNOS"
-	depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && THERMAL
-	select CPU_FREQ_TABLE
+	depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
+	depends on CPU_THERMAL
 	help
 	  If you say yes here you get support for TMU (Thermal Managment
 	  Unit) on SAMSUNG EXYNOS series of SoC.
+
+config DB8500_THERMAL
+	bool "DB8500 thermal management"
+	depends on ARCH_U8500
+	default y
+	help
+	  Adds DB8500 thermal management implementation according to the thermal
+	  management framework. A thermal zone with several trip points will be
+	  created. Cooling devices can be bound to the trip points to cool this
+	  thermal zone if trip points reached.
+
+config DB8500_CPUFREQ_COOLING
+	tristate "DB8500 cpufreq cooling"
+	depends on ARCH_U8500
+	depends on CPU_THERMAL
+	default y
+	help
+	  Adds DB8500 cpufreq cooling devices, and these cooling devices can be
+	  bound to thermal zone trip points. When a trip point reached, the
+	  bound cpufreq cooling device turns active to set CPU frequency low to
+	  cool down the CPU.
+
+endif

drivers/thermal/Makefile

@@ -3,7 +3,18 @@
 #
 
 obj-$(CONFIG_THERMAL)		+= thermal_sys.o
-obj-$(CONFIG_CPU_THERMAL)		+= cpu_cooling.o
-obj-$(CONFIG_SPEAR_THERMAL)		+= spear_thermal.o
+
+# governors
+obj-$(CONFIG_FAIR_SHARE)	+= fair_share.o
+obj-$(CONFIG_STEP_WISE)		+= step_wise.o
+obj-$(CONFIG_USER_SPACE)	+= user_space.o
+
+# cpufreq cooling
+obj-$(CONFIG_CPU_THERMAL)	+= cpu_cooling.o
+
+# platform thermal drivers
+obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
 obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
-obj-$(CONFIG_EXYNOS_THERMAL)		+= exynos_thermal.o
+obj-$(CONFIG_EXYNOS_THERMAL)	+= exynos_thermal.o
+obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
+obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o

drivers/thermal/cpu_cooling.c

@@ -58,12 +58,13 @@ struct cpufreq_cooling_device {
 };
 static LIST_HEAD(cooling_cpufreq_list);
 static DEFINE_IDR(cpufreq_idr);
+static DEFINE_MUTEX(cooling_cpufreq_lock);
 
-static struct mutex cooling_cpufreq_lock;
+static unsigned int cpufreq_dev_count;
 
 /* notify_table passes value to the CPUFREQ_ADJUST callback function. */
 #define NOTIFY_INVALID NULL
-struct cpufreq_cooling_device *notify_device;
+static struct cpufreq_cooling_device *notify_device;
 
 /**
  * get_idr - function to get a unique id.
@@ -240,42 +241,32 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb,
 static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
 				 unsigned long *state)
 {
-	int ret = -EINVAL, i = 0;
-	struct cpufreq_cooling_device *cpufreq_device;
-	struct cpumask *maskPtr;
+	struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
+	struct cpumask *maskPtr = &cpufreq_device->allowed_cpus;
 	unsigned int cpu;
 	struct cpufreq_frequency_table *table;
+	unsigned long count = 0;
+	int i = 0;
 
-	mutex_lock(&cooling_cpufreq_lock);
-	list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) {
-		if (cpufreq_device && cpufreq_device->cool_dev == cdev)
-			break;
-	}
-	if (cpufreq_device == NULL)
-		goto return_get_max_state;
-
-	maskPtr = &cpufreq_device->allowed_cpus;
 	cpu = cpumask_any(maskPtr);
 	table = cpufreq_frequency_get_table(cpu);
 	if (!table) {
 		*state = 0;
-		ret = 0;
-		goto return_get_max_state;
+		return 0;
 	}
 
-	while (table[i].frequency != CPUFREQ_TABLE_END) {
+	for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
 		if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
 			continue;
-		i++;
+		count++;
 	}
-	if (i > 0) {
-		*state = --i;
-		ret = 0;
+
+	if (count > 0) {
+		*state = --count;
+		return 0;
 	}
 
-return_get_max_state:
-	mutex_unlock(&cooling_cpufreq_lock);
-	return ret;
+	return -EINVAL;
 }
 
 /**
@@ -286,20 +277,10 @@ static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
 static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
 				 unsigned long *state)
 {
-	int ret = -EINVAL;
-	struct cpufreq_cooling_device *cpufreq_device;
+	struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
 
-	mutex_lock(&cooling_cpufreq_lock);
-	list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) {
-		if (cpufreq_device && cpufreq_device->cool_dev == cdev) {
-			*state = cpufreq_device->cpufreq_state;
-			ret = 0;
-			break;
-		}
-	}
-	mutex_unlock(&cooling_cpufreq_lock);
-
-	return ret;
+	*state = cpufreq_device->cpufreq_state;
+	return 0;
 }
 
 /**
@@ -310,22 +291,9 @@ static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
 static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 				 unsigned long state)
 {
-	int ret = -EINVAL;
-	struct cpufreq_cooling_device *cpufreq_device;
+	struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
 
-	mutex_lock(&cooling_cpufreq_lock);
-	list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) {
-		if (cpufreq_device && cpufreq_device->cool_dev == cdev) {
-			ret = 0;
-			break;
-		}
-	}
-	if (!ret)
-		ret = cpufreq_apply_cooling(cpufreq_device, state);
-
-	mutex_unlock(&cooling_cpufreq_lock);
-
-	return ret;
+	return cpufreq_apply_cooling(cpufreq_device, state);
 }
 
 /* Bind cpufreq callbacks to thermal cooling device ops */
@@ -345,18 +313,15 @@ static struct notifier_block thermal_cpufreq_notifier_block = {
  * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
  */
 struct thermal_cooling_device *cpufreq_cooling_register(
-	struct cpumask *clip_cpus)
+	const struct cpumask *clip_cpus)
 {
 	struct thermal_cooling_device *cool_dev;
 	struct cpufreq_cooling_device *cpufreq_dev = NULL;
-	unsigned int cpufreq_dev_count = 0, min = 0, max = 0;
+	unsigned int min = 0, max = 0;
 	char dev_name[THERMAL_NAME_LENGTH];
 	int ret = 0, i;
 	struct cpufreq_policy policy;
 
-	list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node)
-		cpufreq_dev_count++;
-
 	/*Verify that all the clip cpus have same freq_min, freq_max limit*/
 	for_each_cpu(i, clip_cpus) {
 		/*continue if cpufreq policy not found and not return error*/
@@ -369,7 +334,7 @@ struct thermal_cooling_device *cpufreq_cooling_register(
 			if (min != policy.cpuinfo.min_freq ||
 				max != policy.cpuinfo.max_freq)
 				return ERR_PTR(-EINVAL);
-}
+		}
 	}
 	cpufreq_dev = kzalloc(sizeof(struct cpufreq_cooling_device),
 			GFP_KERNEL);
@@ -378,9 +343,6 @@ struct thermal_cooling_device *cpufreq_cooling_register(
 
 	cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus);
 
-	if (cpufreq_dev_count == 0)
-		mutex_init(&cooling_cpufreq_lock);
-
 	ret = get_idr(&cpufreq_idr, &cpufreq_dev->id);
 	if (ret) {
 		kfree(cpufreq_dev);
@@ -399,12 +361,12 @@ struct thermal_cooling_device *cpufreq_cooling_register(
 	cpufreq_dev->cool_dev = cool_dev;
 	cpufreq_dev->cpufreq_state = 0;
 	mutex_lock(&cooling_cpufreq_lock);
-	list_add_tail(&cpufreq_dev->node, &cooling_cpufreq_list);
 
 	/* Register the notifier for first cpufreq cooling device */
 	if (cpufreq_dev_count == 0)
 		cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
 						CPUFREQ_POLICY_NOTIFIER);
+	cpufreq_dev_count++;
 
 	mutex_unlock(&cooling_cpufreq_lock);
 	return cool_dev;
@@ -417,33 +379,20 @@ EXPORT_SYMBOL(cpufreq_cooling_register);
  */
 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 {
-	struct cpufreq_cooling_device *cpufreq_dev = NULL;
-	unsigned int cpufreq_dev_count = 0;
+	struct cpufreq_cooling_device *cpufreq_dev = cdev->devdata;
 
 	mutex_lock(&cooling_cpufreq_lock);
-	list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node) {
-		if (cpufreq_dev && cpufreq_dev->cool_dev == cdev)
-			break;
-		cpufreq_dev_count++;
-	}
-
-	if (!cpufreq_dev || cpufreq_dev->cool_dev != cdev) {
-		mutex_unlock(&cooling_cpufreq_lock);
-		return;
-	}
-
-	list_del(&cpufreq_dev->node);
+	cpufreq_dev_count--;
 
 	/* Unregister the notifier for the last cpufreq cooling device */
-	if (cpufreq_dev_count == 1) {
+	if (cpufreq_dev_count == 0) {
 		cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
 					CPUFREQ_POLICY_NOTIFIER);
 	}
 	mutex_unlock(&cooling_cpufreq_lock);
+
 	thermal_cooling_device_unregister(cpufreq_dev->cool_dev);
 	release_idr(&cpufreq_idr, cpufreq_dev->id);
-	if (cpufreq_dev_count == 1)
-		mutex_destroy(&cooling_cpufreq_lock);
 	kfree(cpufreq_dev);
 }
 EXPORT_SYMBOL(cpufreq_cooling_unregister);

drivers/thermal/db8500_cpufreq_cooling.c

+/*
+ * db8500_cpufreq_cooling.c - DB8500 cpufreq works as cooling device.
+ *
+ * Copyright (C) 2012 ST-Ericsson
+ * Copyright (C) 2012 Linaro Ltd.
+ *
+ * Author: Hongbo Zhang <hongbo.zhang@linaro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/cpu_cooling.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+static int db8500_cpufreq_cooling_probe(struct platform_device *pdev)
+{
+	struct thermal_cooling_device *cdev;
+	struct cpumask mask_val;
+
+	/* make sure cpufreq driver has been initialized */
+	if (!cpufreq_frequency_get_table(0))
+		return -EPROBE_DEFER;
+
+	cpumask_set_cpu(0, &mask_val);
+	cdev = cpufreq_cooling_register(&mask_val);
+
+	if (IS_ERR_OR_NULL(cdev)) {
+		dev_err(&pdev->dev, "Failed to register cooling device\n");
+		return PTR_ERR(cdev);
+	}
+
+	platform_set_drvdata(pdev, cdev);
+
+	dev_info(&pdev->dev, "Cooling device registered: %s\n",	cdev->type);
+
+	return 0;
+}
+
+static int db8500_cpufreq_cooling_remove(struct platform_device *pdev)
+{
+	struct thermal_cooling_device *cdev = platform_get_drvdata(pdev);
+
+	cpufreq_cooling_unregister(cdev);
+
+	return 0;
+}
+
+static int db8500_cpufreq_cooling_suspend(struct platform_device *pdev,
+		pm_message_t state)
+{
+	return -ENOSYS;
+}
+
+static int db8500_cpufreq_cooling_resume(struct platform_device *pdev)
+{
+	return -ENOSYS;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id db8500_cpufreq_cooling_match[] = {
+	{ .compatible = "stericsson,db8500-cpufreq-cooling" },
+	{},
+};
+#else
+#define db8500_cpufreq_cooling_match NULL
+#endif
+
+static struct platform_driver db8500_cpufreq_cooling_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "db8500-cpufreq-cooling",
+		.of_match_table = db8500_cpufreq_cooling_match,
+	},
+	.probe = db8500_cpufreq_cooling_probe,
+	.suspend = db8500_cpufreq_cooling_suspend,
+	.resume = db8500_cpufreq_cooling_resume,
+	.remove = db8500_cpufreq_cooling_remove,
+};
+
+static int __init db8500_cpufreq_cooling_init(void)
+{
+	return platform_driver_register(&db8500_cpufreq_cooling_driver);
+}
+
+static void __exit db8500_cpufreq_cooling_exit(void)
+{
+	platform_driver_unregister(&db8500_cpufreq_cooling_driver);
+}
+
+/* Should be later than db8500_cpufreq_register */
+late_initcall(db8500_cpufreq_cooling_init);
+module_exit(db8500_cpufreq_cooling_exit);
+
+MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>");
+MODULE_DESCRIPTION("DB8500 cpufreq cooling driver");
+MODULE_LICENSE("GPL");

drivers/thermal/exynos_thermal.c

@@ -451,7 +451,7 @@ static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
 	th_zone->cool_dev_size++;
 
 	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
-			EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, 0,
+			EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
 			IDLE_INTERVAL);
 
 	if (IS_ERR(th_zone->therm_dev)) {

drivers/thermal/fair_share.c

+/*
+ *  fair_share.c - A simple weight based Thermal governor
+ *
+ *  Copyright (C) 2012 Intel Corp
+ *  Copyright (C) 2012 Durgadoss R <durgadoss.r@intel.com>
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+/**
+ * get_trip_level: - obtains the current trip level for a zone
+ * @tz:		thermal zone device
+ */
+static int get_trip_level(struct thermal_zone_device *tz)
+{
+	int count = 0;
+	unsigned long trip_temp;
+
+	if (tz->trips == 0 || !tz->ops->get_trip_temp)
+		return 0;
+
+	for (count = 0; count < tz->trips; count++) {
+		tz->ops->get_trip_temp(tz, count, &trip_temp);
+		if (tz->temperature < trip_temp)
+			break;
+	}
+	return count;
+}
+
+static long get_target_state(struct thermal_zone_device *tz,
+		struct thermal_cooling_device *cdev, int weight, int level)
+{
+	unsigned long max_state;
+
+	cdev->ops->get_max_state(cdev, &max_state);
+
+	return (long)(weight * level * max_state) / (100 * tz->trips);
+}
+
+/**
+ * fair_share_throttle - throttles devices asscciated with the given zone
+ * @tz - thermal_zone_device
+ *
+ * Throttling Logic: This uses three parameters to calculate the new
+ * throttle state of the cooling devices associated with the given zone.
+ *
+ * Parameters used for Throttling:
+ * P1. max_state: Maximum throttle state exposed by the cooling device.
+ * P2. weight[i]/100:
+ *	How 'effective' the 'i'th device is, in cooling the given zone.
+ * P3. cur_trip_level/max_no_of_trips:
+ *	This describes the extent to which the devices should be throttled.
+ *	We do not want to throttle too much when we trip a lower temperature,
+ *	whereas the throttling is at full swing if we trip critical levels.
+ *	(Heavily assumes the trip points are in ascending order)
+ * new_state of cooling device = P3 * P2 * P1
+ */
+static int fair_share_throttle(struct thermal_zone_device *tz, int trip)
+{
+	const struct thermal_zone_params *tzp;
+	struct thermal_cooling_device *cdev;
+	struct thermal_instance *instance;
+	int i;
+	int cur_trip_level = get_trip_level(tz);
+
+	if (!tz->tzp || !tz->tzp->tbp)
+		return -EINVAL;
+
+	tzp = tz->tzp;
+
+	for (i = 0; i < tzp->num_tbps; i++) {
+		if (!tzp->tbp[i].cdev)
+			continue;
+
+		cdev = tzp->tbp[i].cdev;
+		instance = get_thermal_instance(tz, cdev, trip);
+		if (!instance)
+			continue;
+
+		instance->target = get_target_state(tz, cdev,
+					tzp->tbp[i].weight, cur_trip_level);
+
+		instance->cdev->updated = false;
+		thermal_cdev_update(cdev);
+	}
+	return 0;
+}
+
+static struct thermal_governor thermal_gov_fair_share = {
+	.name		= "fair_share",
+	.throttle	= fair_share_throttle,
+	.owner		= THIS_MODULE,
+};
+
+static int __init thermal_gov_fair_share_init(void)
+{
+	return thermal_register_governor(&thermal_gov_fair_share);
+}
+
+static void __exit thermal_gov_fair_share_exit(void)
+{
+	thermal_unregister_governor(&thermal_gov_fair_share);
+}
+
+/* This should load after thermal framework */
+fs_initcall(thermal_gov_fair_share_init);
+module_exit(thermal_gov_fair_share_exit);
+
+MODULE_AUTHOR("Durgadoss R");
+MODULE_DESCRIPTION("A simple weight based thermal throttling governor");
+MODULE_LICENSE("GPL");

drivers/thermal/rcar_thermal.c

@@ -43,6 +43,9 @@ struct rcar_thermal_priv {
 	u32 comp;
 };
 
+#define MCELSIUS(temp)			((temp) * 1000)
+#define rcar_zone_to_priv(zone)		(zone->devdata)
+
 /*
  *		basic functions
  */
@@ -96,7 +99,7 @@ static void rcar_thermal_bset(struct rcar_thermal_priv *priv, u32 reg,
 static int rcar_thermal_get_temp(struct thermal_zone_device *zone,
 			   unsigned long *temp)
 {
-	struct rcar_thermal_priv *priv = zone->devdata;
+	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
 	int val, min, max, tmp;
 
 	tmp = -200; /* default */
@@ -169,7 +172,7 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone,
 		}
 	}
 
-	*temp = tmp;
+	*temp = MCELSIUS(tmp);
 	return 0;
 }
 
@@ -185,7 +188,6 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	struct thermal_zone_device *zone;
 	struct rcar_thermal_priv *priv;
 	struct resource *res;
-	int ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -206,16 +208,14 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 					  res->start, resource_size(res));
 	if (!priv->base) {
 		dev_err(&pdev->dev, "Unable to ioremap thermal register\n");
-		ret = -ENOMEM;
-		goto error_free_priv;
+		return -ENOMEM;
 	}
 
 	zone = thermal_zone_device_register("rcar_thermal", 0, 0, priv,
-					    &rcar_thermal_zone_ops, 0, 0);
+				    &rcar_thermal_zone_ops, NULL, 0, 0);
 	if (IS_ERR(zone)) {
 		dev_err(&pdev->dev, "thermal zone device is NULL\n");
-		ret = PTR_ERR(zone);
-		goto error_iounmap;
+		return PTR_ERR(zone);
 	}
 
 	platform_set_drvdata(pdev, zone);
@@ -223,26 +223,15 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "proved\n");
 
 	return 0;
-
-error_iounmap:
-	devm_iounmap(&pdev->dev, priv->base);
-error_free_priv:
-	devm_kfree(&pdev->dev, priv);
-
-	return ret;
 }
 
 static int rcar_thermal_remove(struct platform_device *pdev)
 {
 	struct thermal_zone_device *zone = platform_get_drvdata(pdev);
-	struct rcar_thermal_priv *priv = zone->devdata;
 
 	thermal_zone_device_unregister(zone);
 	platform_set_drvdata(pdev, NULL);
 
-	devm_iounmap(&pdev->dev, priv->base);
-	devm_kfree(&pdev->dev, priv);
-
 	return 0;
 }
 

drivers/thermal/spear_thermal.c

@@ -147,7 +147,7 @@ static int spear_thermal_probe(struct platform_device *pdev)
 	writel_relaxed(stdev->flags, stdev->thermal_base);
 
 	spear_thermal = thermal_zone_device_register("spear_thermal", 0, 0,
-				stdev, &ops, 0, 0);
+				stdev, &ops, NULL, 0, 0);
 	if (IS_ERR(spear_thermal)) {
 		dev_err(&pdev->dev, "thermal zone device is NULL\n");
 		ret = PTR_ERR(spear_thermal);

drivers/thermal/step_wise.c

+/*
+ *  step_wise.c - A step-by-step Thermal throttling governor
+ *
+ *  Copyright (C) 2012 Intel Corp
+ *  Copyright (C) 2012 Durgadoss R <durgadoss.r@intel.com>
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+/*
+ * If the temperature is higher than a trip point,
+ *    a. if the trend is THERMAL_TREND_RAISING, use higher cooling
+ *       state for this trip point
+ *    b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
+ *       state for this trip point
+ */
+static unsigned long get_target_state(struct thermal_instance *instance,
+					enum thermal_trend trend)
+{
+	struct thermal_cooling_device *cdev = instance->cdev;
+	unsigned long cur_state;
+
+	cdev->ops->get_cur_state(cdev, &cur_state);
+
+	if (trend == THERMAL_TREND_RAISING) {
+		cur_state = cur_state < instance->upper ?
+			    (cur_state + 1) : instance->upper;
+	} else if (trend == THERMAL_TREND_DROPPING) {
+		cur_state = cur_state > instance->lower ?
+			    (cur_state - 1) : instance->lower;
+	}
+
+	return cur_state;
+}
+
+static void update_passive_instance(struct thermal_zone_device *tz,
+				enum thermal_trip_type type, int value)
+{
+	/*
+	 * If value is +1, activate a passive instance.
+	 * If value is -1, deactivate a passive instance.
+	 */
+	if (type == THERMAL_TRIP_PASSIVE || type == THERMAL_TRIPS_NONE)
+		tz->passive += value;
+}
+
+static void update_instance_for_throttle(struct thermal_zone_device *tz,
+				int trip, enum thermal_trip_type trip_type,
+				enum thermal_trend trend)
+{
+	struct thermal_instance *instance;
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		if (instance->trip != trip)
+			continue;
+
+		instance->target = get_target_state(instance, trend);
+
+		/* Activate a passive thermal instance */
+		if (instance->target == THERMAL_NO_TARGET)
+			update_passive_instance(tz, trip_type, 1);
+
+		instance->cdev->updated = false; /* cdev needs update */
+	}
+}
+
+static void update_instance_for_dethrottle(struct thermal_zone_device *tz,
+				int trip, enum thermal_trip_type trip_type)
+{
+	struct thermal_instance *instance;
+	struct thermal_cooling_device *cdev;
+	unsigned long cur_state;
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		if (instance->trip != trip ||
+			instance->target == THERMAL_NO_TARGET)
+			continue;
+
+		cdev = instance->cdev;
+		cdev->ops->get_cur_state(cdev, &cur_state);
+
+		instance->target = cur_state > instance->lower ?
+			    (cur_state - 1) : THERMAL_NO_TARGET;
+
+		/* Deactivate a passive thermal instance */
+		if (instance->target == THERMAL_NO_TARGET)
+			update_passive_instance(tz, trip_type, -1);
+
+		cdev->updated = false; /* cdev needs update */
+	}
+}
+
+static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
+{
+	long trip_temp;
+	enum thermal_trip_type trip_type;
+	enum thermal_trend trend;
+
+	if (trip == THERMAL_TRIPS_NONE) {
+		trip_temp = tz->forced_passive;
+		trip_type = THERMAL_TRIPS_NONE;
+	} else {
+		tz->ops->get_trip_temp(tz, trip, &trip_temp);
+		tz->ops->get_trip_type(tz, trip, &trip_type);
+	}
+
+	trend = get_tz_trend(tz, trip);
+
+	mutex_lock(&tz->lock);
+
+	if (tz->temperature >= trip_temp)
+		update_instance_for_throttle(tz, trip, trip_type, trend);
+	else
+		update_instance_for_dethrottle(tz, trip, trip_type);
+
+	mutex_unlock(&tz->lock);
+}
+
+/**
+ * step_wise_throttle - throttles devices asscciated with the given zone
+ * @tz - thermal_zone_device
+ * @trip - the trip point
+ * @trip_type - type of the trip point
+ *
+ * Throttling Logic: This uses the trend of the thermal zone to throttle.
+ * If the thermal zone is 'heating up' this throttles all the cooling
+ * devices associated with the zone and its particular trip point, by one
+ * step. If the zone is 'cooling down' it brings back the performance of
+ * the devices by one step.
+ */
+static int step_wise_throttle(struct thermal_zone_device *tz, int trip)
+{
+	struct thermal_instance *instance;
+
+	thermal_zone_trip_update(tz, trip);
+
+	if (tz->forced_passive)
+		thermal_zone_trip_update(tz, THERMAL_TRIPS_NONE);
+
+	mutex_lock(&tz->lock);
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node)
+		thermal_cdev_update(instance->cdev);
+
+	mutex_unlock(&tz->lock);
+
+	return 0;
+}
+
+static struct thermal_governor thermal_gov_step_wise = {
+	.name		= "step_wise",
+	.throttle	= step_wise_throttle,
+	.owner		= THIS_MODULE,
+};
+
+static int __init thermal_gov_step_wise_init(void)
+{
+	return thermal_register_governor(&thermal_gov_step_wise);
+}
+
+static void __exit thermal_gov_step_wise_exit(void)
+{
+	thermal_unregister_governor(&thermal_gov_step_wise);
+}
+
+/* This should load after thermal framework */
+fs_initcall(thermal_gov_step_wise_init);
+module_exit(thermal_gov_step_wise_exit);
+
+MODULE_AUTHOR("Durgadoss R");
+MODULE_DESCRIPTION("A step-by-step thermal throttling governor");
+MODULE_LICENSE("GPL");

drivers/thermal/thermal_core.h

+/*
+ *  thermal_core.h
+ *
+ *  Copyright (C) 2012  Intel Corp
+ *  Author: Durgadoss R <durgadoss.r@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef __THERMAL_CORE_H__
+#define __THERMAL_CORE_H__
+
+#include <linux/device.h>
+#include <linux/thermal.h>
+
+/* Initial state of a cooling device during binding */
+#define THERMAL_NO_TARGET -1UL
+
+/*
+ * This structure is used to describe the behavior of
+ * a certain cooling device on a certain trip point
+ * in a certain thermal zone
+ */
+struct thermal_instance {
+	int id;
+	char name[THERMAL_NAME_LENGTH];
+	struct thermal_zone_device *tz;
+	struct thermal_cooling_device *cdev;
+	int trip;
+	unsigned long upper;	/* Highest cooling state for this trip point */
+	unsigned long lower;	/* Lowest cooling state for this trip point */
+	unsigned long target;	/* expected cooling state */
+	char attr_name[THERMAL_NAME_LENGTH];
+	struct device_attribute attr;
+	struct list_head tz_node; /* node in tz->thermal_instances */
+	struct list_head cdev_node; /* node in cdev->thermal_instances */
+};
+
+#endif /* __THERMAL_CORE_H__ */

drivers/thermal/user_space.c

+/*
+ *  user_space.c - A simple user space Thermal events notifier
+ *
+ *  Copyright (C) 2012 Intel Corp
+ *  Copyright (C) 2012 Durgadoss R <durgadoss.r@intel.com>
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+/**
+ * notify_user_space - Notifies user space about thermal events
+ * @tz - thermal_zone_device
+ *
+ * This function notifies the user space through UEvents.
+ */
+static int notify_user_space(struct thermal_zone_device *tz, int trip)
+{
+	mutex_lock(&tz->lock);
+	kobject_uevent(&tz->device.kobj, KOBJ_CHANGE);
+	mutex_unlock(&tz->lock);
+	return 0;
+}
+
+static struct thermal_governor thermal_gov_user_space = {
+	.name		= "user_space",
+	.throttle	= notify_user_space,
+	.owner		= THIS_MODULE,
+};
+
+static int __init thermal_gov_user_space_init(void)
+{
+	return thermal_register_governor(&thermal_gov_user_space);
+}
+
+static void __exit thermal_gov_user_space_exit(void)
+{
+	thermal_unregister_governor(&thermal_gov_user_space);
+}
+
+/* This should load after thermal framework */
+fs_initcall(thermal_gov_user_space_init);
+module_exit(thermal_gov_user_space_exit);
+
+MODULE_AUTHOR("Durgadoss R");
+MODULE_DESCRIPTION("A user space Thermal notifier");
+MODULE_LICENSE("GPL");

include/linux/cpu_cooling.h

@@ -29,13 +29,13 @@
 #define CPUFREQ_COOLING_START		0
 #define CPUFREQ_COOLING_STOP		1
 
-#ifdef CONFIG_CPU_THERMAL
+#if defined(CONFIG_CPU_THERMAL) || defined(CONFIG_CPU_THERMAL_MODULE)
 /**
  * cpufreq_cooling_register - function to create cpufreq cooling device.
  * @clip_cpus: cpumask of cpus where the frequency constraints will happen
  */
 struct thermal_cooling_device *cpufreq_cooling_register(
-		struct cpumask *clip_cpus);
+		const struct cpumask *clip_cpus);
 
 /**
  * cpufreq_cooling_unregister - function to remove cpufreq cooling device.
@@ -44,7 +44,7 @@ struct thermal_cooling_device *cpufreq_cooling_register(
 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev);
 #else /* !CONFIG_CPU_THERMAL */
 static inline struct thermal_cooling_device *cpufreq_cooling_register(
-	struct cpumask *clip_cpus)
+	const struct cpumask *clip_cpus)
 {
 	return NULL;
 }

include/linux/platform_data/db8500_thermal.h

+/*
+ * db8500_thermal.h - DB8500 Thermal Management Implementation
+ *
+ * Copyright (C) 2012 ST-Ericsson
+ * Copyright (C) 2012 Linaro Ltd.
+ *
+ * Author: Hongbo Zhang <hongbo.zhang@linaro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DB8500_THERMAL_H_
+#define _DB8500_THERMAL_H_
+
+#include <linux/thermal.h>
+
+#define COOLING_DEV_MAX 8
+
+struct db8500_trip_point {
+	unsigned long temp;
+	enum thermal_trip_type type;
+	char cdev_name[COOLING_DEV_MAX][THERMAL_NAME_LENGTH];
+};
+
+struct db8500_thsens_platform_data {
+	struct db8500_trip_point trip_points[THERMAL_MAX_TRIPS];
+	int num_trips;
+};
+
+#endif /* _DB8500_THERMAL_H_ */

include/linux/thermal.h

@@ -29,6 +29,32 @@
 #include <linux/device.h>
 #include <linux/workqueue.h>
 
+#define THERMAL_TRIPS_NONE	-1
+#define THERMAL_MAX_TRIPS	12
+#define THERMAL_NAME_LENGTH	20
+
+/* No upper/lower limit requirement */
+#define THERMAL_NO_LIMIT	-1UL
+
+/* Unit conversion macros */
+#define KELVIN_TO_CELSIUS(t)	(long)(((long)t-2732 >= 0) ?	\
+				((long)t-2732+5)/10 : ((long)t-2732-5)/10)
+#define CELSIUS_TO_KELVIN(t)	((t)*10+2732)
+
+/* Adding event notification support elements */
+#define THERMAL_GENL_FAMILY_NAME                "thermal_event"
+#define THERMAL_GENL_VERSION                    0x01
+#define THERMAL_GENL_MCAST_GROUP_NAME           "thermal_mc_group"
+
+/* Default Thermal Governor */
+#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
+#define DEFAULT_THERMAL_GOVERNOR       "step_wise"
+#elif defined(CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE)
+#define DEFAULT_THERMAL_GOVERNOR       "fair_share"
+#elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE)
+#define DEFAULT_THERMAL_GOVERNOR       "user_space"
+#endif
+
 struct thermal_zone_device;
 struct thermal_cooling_device;
 
@@ -50,6 +76,30 @@ enum thermal_trend {
 	THERMAL_TREND_DROPPING, /* temperature is dropping */
 };
 
+/* Events supported by Thermal Netlink */
+enum events {
+	THERMAL_AUX0,
+	THERMAL_AUX1,
+	THERMAL_CRITICAL,
+	THERMAL_DEV_FAULT,
+};
+
+/* attributes of thermal_genl_family */
+enum {
+	THERMAL_GENL_ATTR_UNSPEC,
+	THERMAL_GENL_ATTR_EVENT,
+	__THERMAL_GENL_ATTR_MAX,
+};
+#define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1)
+
+/* commands supported by the thermal_genl_family */
+enum {
+	THERMAL_GENL_CMD_UNSPEC,
+	THERMAL_GENL_CMD_EVENT,
+	__THERMAL_GENL_CMD_MAX,
+};
+#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1)
+
 struct thermal_zone_device_ops {
 	int (*bind) (struct thermal_zone_device *,
 		     struct thermal_cooling_device *);
@@ -83,11 +133,6 @@ struct thermal_cooling_device_ops {
 	int (*set_cur_state) (struct thermal_cooling_device *, unsigned long);
 };
 
-#define THERMAL_NO_LIMIT -1UL /* no upper/lower limit requirement */
-
-#define THERMAL_TRIPS_NONE -1
-#define THERMAL_MAX_TRIPS 12
-#define THERMAL_NAME_LENGTH 20
 struct thermal_cooling_device {
 	int id;
 	char type[THERMAL_NAME_LENGTH];
@@ -100,10 +145,6 @@ struct thermal_cooling_device {
 	struct list_head node;
 };
 
-#define KELVIN_TO_CELSIUS(t)	(long)(((long)t-2732 >= 0) ?	\
-				((long)t-2732+5)/10 : ((long)t-2732-5)/10)
-#define CELSIUS_TO_KELVIN(t)	((t)*10+2732)
-
 struct thermal_attr {
 	struct device_attribute attr;
 	char name[THERMAL_NAME_LENGTH];
@@ -125,46 +166,61 @@ struct thermal_zone_device {
 	int passive;
 	unsigned int forced_passive;
 	const struct thermal_zone_device_ops *ops;
+	const struct thermal_zone_params *tzp;
+	struct thermal_governor *governor;
 	struct list_head thermal_instances;
 	struct idr idr;
 	struct mutex lock; /* protect thermal_instances list */
 	struct list_head node;
 	struct delayed_work poll_queue;
 };
-/* Adding event notification support elements */
-#define THERMAL_GENL_FAMILY_NAME                "thermal_event"
-#define THERMAL_GENL_VERSION                    0x01
-#define THERMAL_GENL_MCAST_GROUP_NAME           "thermal_mc_group"
 
-enum events {
-	THERMAL_AUX0,
-	THERMAL_AUX1,
-	THERMAL_CRITICAL,
-	THERMAL_DEV_FAULT,
+/* Structure that holds thermal governor information */
+struct thermal_governor {
+	char name[THERMAL_NAME_LENGTH];
+	int (*throttle)(struct thermal_zone_device *tz, int trip);
+	struct list_head	governor_list;
+	struct module		*owner;
 };
 
-struct thermal_genl_event {
-	u32 orig;
-	enum events event;
+/* Structure that holds binding parameters for a zone */
+struct thermal_bind_params {
+	struct thermal_cooling_device *cdev;
+
+	/*
+	 * This is a measure of 'how effectively these devices can
+	 * cool 'this' thermal zone. The shall be determined by platform
+	 * characterization. This is on a 'percentage' scale.
+	 * See Documentation/thermal/sysfs-api.txt for more information.
+	 */
+	int weight;
+
+	/*
+	 * This is a bit mask that gives the binding relation between this
+	 * thermal zone and cdev, for a particular trip point.
+	 * See Documentation/thermal/sysfs-api.txt for more information.
+	 */
+	int trip_mask;
+	int (*match) (struct thermal_zone_device *tz,
+			struct thermal_cooling_device *cdev);
 };
-/* attributes of thermal_genl_family */
-enum {
-	THERMAL_GENL_ATTR_UNSPEC,
-	THERMAL_GENL_ATTR_EVENT,
-	__THERMAL_GENL_ATTR_MAX,
+
+/* Structure to define Thermal Zone parameters */
+struct thermal_zone_params {
+	char governor_name[THERMAL_NAME_LENGTH];
+	int num_tbps;	/* Number of tbp entries */
+	struct thermal_bind_params *tbp;
 };
-#define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1)
 
-/* commands supported by the thermal_genl_family */
-enum {
-	THERMAL_GENL_CMD_UNSPEC,
-	THERMAL_GENL_CMD_EVENT,
-	__THERMAL_GENL_CMD_MAX,
+struct thermal_genl_event {
+	u32 orig;
+	enum events event;
 };
-#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1)
 
+/* Function declarations */
 struct thermal_zone_device *thermal_zone_device_register(const char *, int, int,
-		void *, const struct thermal_zone_device_ops *, int, int);
+		void *, const struct thermal_zone_device_ops *,
+		const struct thermal_zone_params *, int, int);
 void thermal_zone_device_unregister(struct thermal_zone_device *);
 
 int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
@@ -173,10 +229,20 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int,
 				       struct thermal_cooling_device *);
 void thermal_zone_device_update(struct thermal_zone_device *);
+
 struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
 		const struct thermal_cooling_device_ops *);
 void thermal_cooling_device_unregister(struct thermal_cooling_device *);
 
+int get_tz_trend(struct thermal_zone_device *, int);
+struct thermal_instance *get_thermal_instance(struct thermal_zone_device *,
+		struct thermal_cooling_device *, int);
+void thermal_cdev_update(struct thermal_cooling_device *);
+void notify_thermal_framework(struct thermal_zone_device *, int);
+
+int thermal_register_governor(struct thermal_governor *);
+void thermal_unregister_governor(struct thermal_governor *);
+
 #ifdef CONFIG_NET
 extern int thermal_generate_netlink_event(u32 orig, enum events event);
 #else