Commit 50fbabfe authored by Hemant Pedanekar's avatar Hemant Pedanekar Committed by Kevin Hilman

davinci: dm646x-evm: Add platform data for NAND

This patch adds platform data and partition info for NAND on dm6467 EVM.

Note that the partition layout is dependent on the UBL, U-Boot etc. used. This
patch tries to minimize that dependency by setting first partition for UBL,
U-Boot and environment altogether.
Signed-off-by: default avatarHemant Pedanekar <hemantp@ti.com>
Signed-off-by: default avatarKevin Hilman <khilman@deeprootsystems.com>
parent 42d399e4
......@@ -27,6 +27,10 @@
#include <media/tvp514x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -34,6 +38,7 @@
#include <mach/common.h>
#include <mach/serial.h>
#include <mach/i2c.h>
#include <mach/nand.h>
#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
......@@ -42,6 +47,11 @@
#define HAS_ATA 0
#endif
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x20008000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x42000000
#define NAND_BLOCK_SIZE SZ_128K
/* CPLD Register 0 bits to control ATA */
#define DM646X_EVM_ATA_RST BIT(0)
#define DM646X_EVM_ATA_PWD BIT(1)
......@@ -77,6 +87,63 @@ static struct davinci_uart_config uart_config __initdata = {
.enabled_uarts = (1 << 0),
};
/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
* and U-Boot environment this avoids dependency on any particular combination
* of UBL, U-Boot or flashing tools etc.
*/
static struct mtd_partition davinci_nand_partitions[] = {
{
/* UBL, U-Boot with environment */
.name = "bootloader",
.offset = MTDPART_OFS_APPEND,
.size = 16 * NAND_BLOCK_SIZE,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4M,
.mask_flags = 0,
}, {
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
}
};
static struct davinci_nand_pdata davinci_nand_data = {
.mask_cle = 0x80000,
.mask_ale = 0x40000,
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
.options = 0,
};
static struct resource davinci_nand_resources[] = {
{
.start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
.end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
.end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device davinci_nand_device = {
.name = "davinci_nand",
.id = 0,
.num_resources = ARRAY_SIZE(davinci_nand_resources),
.resource = davinci_nand_resources,
.dev = {
.platform_data = &davinci_nand_data,
},
};
/* CPLD Register 0 Client: used for I/O Control */
static int cpld_reg0_probe(struct i2c_client *client,
const struct i2c_device_id *id)
......@@ -632,6 +699,8 @@ static __init void evm_init(void)
dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
platform_device_register(&davinci_nand_device);
if (HAS_ATA)
dm646x_init_ide();
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment