Commit 511cdcc5 authored by Mike Frysinger's avatar Mike Frysinger

Blackfin: optimize startup code

Take advantage of more Blackfin-specific insns, and only initialize
registers required by the ABI.
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent c6345ab1
......@@ -31,6 +31,7 @@ ENDPROC(__init_clear_bss)
ENTRY(__start)
/* R0: argument of command line string, passed from uboot, save it */
R7 = R0;
/* Enable Cycle Counter and Nesting Of Interrupts */
#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
R0 = SYSCFG_SNEN;
......@@ -38,76 +39,49 @@ ENTRY(__start)
R0 = SYSCFG_SNEN | SYSCFG_CCEN;
#endif
SYSCFG = R0;
R0 = 0;
/* Clear Out All the data and pointer Registers */
R1 = R0;
R2 = R0;
R3 = R0;
R4 = R0;
R5 = R0;
R6 = R0;
P0 = R0;
P1 = R0;
P2 = R0;
P3 = R0;
P4 = R0;
P5 = R0;
LC0 = r0;
LC1 = r0;
L0 = r0;
L1 = r0;
L2 = r0;
L3 = r0;
/* Clear Out All the DAG Registers */
B0 = r0;
B1 = r0;
B2 = r0;
B3 = r0;
I0 = r0;
I1 = r0;
I2 = r0;
I3 = r0;
M0 = r0;
M1 = r0;
M2 = r0;
M3 = r0;
/* Optimization register tricks: keep a base value in the
* reserved P registers so we use the load/store with an
* offset syntax. R0 = [P5 + <constant>];
* P5 - core MMR base
* R6 - 0
*/
r6 = 0;
p5.l = 0;
p5.h = hi(COREMMR_BASE);
/* Zero out registers required by Blackfin ABI */
/* Disable circular buffers */
L0 = r6;
L1 = r6;
L2 = r6;
L3 = r6;
/* Disable hardware loops in case we were started by 'go' */
LC0 = r6;
LC1 = r6;
/*
* Clear ITEST_COMMAND and DTEST_COMMAND registers,
* Leaving these as non-zero can confuse the emulator
*/
p0.L = LO(DTEST_COMMAND);
p0.H = HI(DTEST_COMMAND);
[p0] = R0;
[p0 + (ITEST_COMMAND - DTEST_COMMAND)] = R0;
[p5 + (DTEST_COMMAND - COREMMR_BASE)] = r6;
[p5 + (ITEST_COMMAND - COREMMR_BASE)] = r6;
CSYNC;
trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
p0.l = LO(IMEM_CONTROL);
p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
[p0] = R0;
r1 = [p5 + (IMEM_CONTROL - COREMMR_BASE)];
BITCLR (r1, ENICPLB_P);
[p5 + (IMEM_CONTROL - COREMMR_BASE)] = r1;
SSYNC;
/* Turn off the dcache */
p0.l = LO(DMEM_CONTROL);
p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
[p0] = R0;
r1 = [p5 + (DMEM_CONTROL - COREMMR_BASE)];
BITCLR (r1, ENDCPLB_P);
[p5 + (DMEM_CONTROL - COREMMR_BASE)] = r1;
SSYNC;
/* in case of double faults, save a few things */
......@@ -122,25 +96,25 @@ ENTRY(__start)
* below
*/
GET_PDA(p0, r0);
r6 = [p0 + PDA_DF_RETX];
r5 = [p0 + PDA_DF_RETX];
p1.l = _init_saved_retx;
p1.h = _init_saved_retx;
[p1] = r6;
[p1] = r5;
r6 = [p0 + PDA_DF_DCPLB];
r5 = [p0 + PDA_DF_DCPLB];
p1.l = _init_saved_dcplb_fault_addr;
p1.h = _init_saved_dcplb_fault_addr;
[p1] = r6;
[p1] = r5;
r6 = [p0 + PDA_DF_ICPLB];
r5 = [p0 + PDA_DF_ICPLB];
p1.l = _init_saved_icplb_fault_addr;
p1.h = _init_saved_icplb_fault_addr;
[p1] = r6;
[p1] = r5;
r6 = [p0 + PDA_DF_SEQSTAT];
r5 = [p0 + PDA_DF_SEQSTAT];
p1.l = _init_saved_seqstat;
p1.h = _init_saved_seqstat;
[p1] = r6;
[p1] = r5;
#endif
/* Initialize stack pointer */
......@@ -155,7 +129,7 @@ ENTRY(__start)
sti r0;
#endif
r0 = 0 (x);
r0 = r6;
/* Zero out all of the fun bss regions */
#if L1_DATA_A_LENGTH > 0
r1.l = __sbss_l1;
......@@ -210,11 +184,9 @@ ENTRY(__start)
/* EVT15 = _real_start */
p0.l = lo(EVT15);
p0.h = hi(EVT15);
p1.l = _real_start;
p1.h = _real_start;
[p0] = p1;
[p5 + (EVT15 - COREMMR_BASE)] = p1;
csync;
#ifdef CONFIG_EARLY_PRINTK
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment