Commit 51470222 authored by Shawn Guo's avatar Shawn Guo Committed by Linus Walleij

dt-bindings: pinctrl: qcom: Add QCM2290 pinctrl bindings

Add device tree bindings for QCM2290 pinctrl.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210923033224.29719-2-shawn.guo@linaro.orgSigned-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 7d74b55a
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Technologies, Inc. QCM2290 TLMM block
maintainers:
- Shawn Guo <shawn.guo@linaro.org>
description:
This binding describes the Top Level Mode Multiplexer block found in the
QCM2290 platform.
properties:
compatible:
const: qcom,qcm2290-tlmm
reg:
maxItems: 1
interrupts:
description: Specifies the TLMM summary IRQ
maxItems: 1
interrupt-controller: true
'#interrupt-cells':
description:
Specifies the PIN numbers and Flags, as defined in defined in
include/dt-bindings/interrupt-controller/irq.h
const: 2
gpio-controller: true
'#gpio-cells':
description: Specifying the pin number and flags, as defined in
include/dt-bindings/gpio/gpio.h
const: 2
gpio-ranges:
maxItems: 1
wakeup-parent:
maxItems: 1
#PIN CONFIGURATION NODES
patternProperties:
'-state$':
oneOf:
- $ref: "#/$defs/qcom-qcm2290-tlmm-state"
- patternProperties:
".*":
$ref: "#/$defs/qcom-qcm2290-tlmm-state"
'$defs':
qcom-qcm2290-tlmm-state:
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
properties:
pins:
description:
List of gpio pins affected by the properties specified in this
subnode.
items:
oneOf:
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[0-6])$"
- enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
sdc2_clk, sdc2_cmd, sdc2_data ]
minItems: 1
maxItems: 36
function:
description:
Specify the alternative function to be configured for the specified
pins.
enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c,
cci_timer0, cci_timer1, cci_timer2, cci_timer3, char_exec,
cri_trng, cri_trng0, cri_trng1, dac_calib, dbg_out, ddr_bist,
ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2,
gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx,
jitter_bist, mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1,
mpm_pwr, mss_lte, m_voc, nav_gpio, pa_indicator, pbs0, pbs1,
pbs2, pbs3, pbs4, pbs5, pbs6, pbs7, pbs8, pbs9, pbs10, pbs11,
pbs12, pbs13, pbs14, pbs15, pbs_out, phase_flag, pll_bist,
pll_bypassnl, pll_reset, prng_rosc, pwm_0, pwm_1, pwm_2, pwm_3,
pwm_4, pwm_5, pwm_6, pwm_7, pwm_8, pwm_9, qdss_cti, qdss_gpio,
qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb, sdc2_tb, sd_write,
ssbi_wtr1, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm,
uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1,
vsense_trigger, wlan1_adc0, wlan1_adc1 ]
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
default: 2
description:
Selects the drive strength for the specified pins, in mA.
bias-pull-down: true
bias-pull-up: true
bias-disable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
required:
- compatible
- reg
- interrupts
- interrupt-controller
- '#interrupt-cells'
- gpio-controller
- '#gpio-cells'
- gpio-ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
tlmm: pinctrl@500000 {
compatible = "qcom,qcm2290-tlmm";
reg = <0x500000 0x300000>;
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 127>;
sdc2_on_state: sdc2-on-state {
clk {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
cmd {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
data {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment