Merge tag 'thermal-v6.4-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull more thermal control changes for 6.4-rc1 from Daniel Lezcano:

"- Do preparating cleaning and DT bindings for RK3588 support
   (Sebastian Reichel)

 - Add driver support for RK3588 (Finley Xiao)

 - Use devm_reset_control_array_get_exclusive() for the Rockchip driver
   (Ye Xingchen)

 - Detect power gated thermal zones and return -EAGAIN when reading the
   temperature (Mikko Perttunen)

 - Remove thermal_bind_params structure as it is unused (Zhang Rui)

 - Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
   Herring)

 - Update the power allocator documentation according to the thermal
   trace relocation (Lukas Bulwahn)

 - Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
   (Chen-Yu Tsai)

 - Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen)

 - Add AP domain support to LVTS thermal controllers for mt8195
   (Balsam CHIHI)

 - Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano)

 - Make thermal_of_zone_[un]register() private to the thermal OF code
   (Daniel Lezcano)

 - Create a private copy of the thermal zone device parameters
   structure when registering a thermal zone (Daniel Lezcano)"

* tag 'thermal-v6.4-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/core: Alloc-copy-free the thermal zone parameters structure
  thermal/of: Unexport unused OF functions
  thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister
  thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195
  dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195
  thermal: amlogic: Use dev_err_probe()
  thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask
  MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement
  dt-bindings: thermal: Drop unneeded quotes
  thermal/core: Remove thermal_bind_params structure
  thermal/drivers/tegra-bpmp: Handle offline zones
  thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive()
  dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible
  thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver
  thermal/drivers/rockchip: Support dynamic sized sensor array
  thermal/drivers/rockchip: Simplify channel id logic
  thermal/drivers/rockchip: Use dev_err_probe
  thermal/drivers/rockchip: Simplify clock logic
  thermal/drivers/rockchip: Simplify getting match data

Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml

@@ -30,7 +30,7 @@ properties:
 
   amlogic,ao-secure:
     description: phandle to the ao-secure syscon
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   '#thermal-sensor-cells':
     const: 0

Documentation/devicetree/bindings/thermal/imx-thermal.yaml

@@ -40,11 +40,11 @@ properties:
       - const: temp_grade
 
   fsl,tempmon:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: Phandle to anatop system controller node.
 
   fsl,tempmon-data:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Deprecated property, phandle pointer to fuse controller that contains
       TEMPMON calibration data, e.g. OCOTP on imx6q. The details about

Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml

@@ -29,14 +29,14 @@ properties:
     maxItems: 1
 
   fsl,tmu-range:
-    $ref: '/schemas/types.yaml#/definitions/uint32-array'
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
       The values to be programmed into TTRnCR, as specified by the SoC
       reference manual. The first cell is TTR0CR, the second is TTR1CR, etc.
     maxItems: 4
 
   fsl,tmu-calibration:
-    $ref: '/schemas/types.yaml#/definitions/uint32-matrix'
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
     description: |
       A list of cell pairs containing temperature calibration data, as
       specified by the SoC reference manual. The first cell of each pair

Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml

@@ -19,6 +19,7 @@ properties:
       - rockchip,rk3368-tsadc
       - rockchip,rk3399-tsadc
       - rockchip,rk3568-tsadc
+      - rockchip,rk3588-tsadc
       - rockchip,rv1108-tsadc
 
   reg:

Documentation/driver-api/thermal/sysfs-api.rst

@@ -304,42 +304,6 @@ temperature) and throttle appropriate devices.
 1.4 Thermal Zone Parameters
 ---------------------------
 
-    ::
-
-	struct thermal_bind_params
-
-    This structure defines the following parameters that are used to bind
-    a zone with a cooling device for a particular trip point.
-
-    .cdev:
-	     The cooling device pointer
-    .weight:
-	     The 'influence' of a particular cooling device on this
-	     zone. This is relative to the rest of the cooling
-	     devices. For example, if all cooling devices have a
-	     weight of 1, then they all contribute the same. You can
-	     use percentages if you want, but it's not mandatory. A
-	     weight of 0 means that this cooling device doesn't
-	     contribute to the cooling of this zone unless all cooling
-	     devices have a weight of 0. If all weights are 0, then
-	     they all contribute the same.
-    .trip_mask:
-	       This is a bit mask that gives the binding relation between
-	       this thermal zone and cdev, for a particular trip point.
-	       If nth bit is set, then the cdev and thermal zone are bound
-	       for trip point n.
-    .binding_limits:
-		     This is an array of cooling state limits. Must have
-		     exactly 2 * thermal_zone.number_of_trip_points. It is an
-		     array consisting of tuples <lower-state upper-state> of
-		     state limits. Each trip will be associated with one state
-		     limit tuple when binding. A NULL pointer means
-		     <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> on all trips.
-		     These limits are used when binding a cdev to a trip point.
-    .match:
-	    This call back returns success(0) if the 'tz and cdev' need to
-	    be bound, as per platform data.
-
     ::
 
 	struct thermal_zone_params
@@ -357,10 +321,6 @@ temperature) and throttle appropriate devices.
 	       will be created. when no_hwmon == true, nothing will be done.
 	       In case the thermal_zone_params is NULL, the hwmon interface
 	       will be created (for backward compatibility).
-    .num_tbps:
-	       Number of thermal_bind_params entries for this zone
-    .tbp:
-	       thermal_bind_params entries
 
 2. sysfs attributes structure
 =============================

MAINTAINERS

@@ -20771,7 +20771,7 @@ L:	linux-pm@vger.kernel.org
 S:	Maintained
 F:	Documentation/driver-api/thermal/power_allocator.rst
 F:	drivers/thermal/gov_power_allocator.c
-F:	include/trace/events/thermal_power_allocator.h
+F:	drivers/thermal/thermal_trace_ipa.h
 
 THINKPAD ACPI EXTRAS DRIVER
 M:	Henrique de Moraes Holschuh <hmh@hmh.eng.br>

drivers/thermal/amlogic_thermal.c

@@ -262,11 +262,8 @@ static int amlogic_thermal_probe(struct platform_device *pdev)
 		return PTR_ERR(pdata->regmap);
 
 	pdata->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(pdata->clk)) {
-		if (PTR_ERR(pdata->clk) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get clock\n");
-		return PTR_ERR(pdata->clk);
-	}
+	if (IS_ERR(pdata->clk))
+		return dev_err_probe(dev, PTR_ERR(pdata->clk), "failed to get clock\n");
 
 	pdata->sec_ao_map = syscon_regmap_lookup_by_phandle
 		(pdev->dev.of_node, "amlogic,ao-secure");

drivers/thermal/broadcom/bcm2835_thermal.c

@@ -275,7 +275,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 
 	return 0;
 err_tz:
-	thermal_of_zone_unregister(tz);
+	devm_thermal_of_zone_unregister(&pdev->dev, tz);
 err_clk:
 	clk_disable_unprepare(data->clk);
 
@@ -285,10 +285,8 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 static int bcm2835_thermal_remove(struct platform_device *pdev)
 {
 	struct bcm2835_thermal_data *data = platform_get_drvdata(pdev);
-	struct thermal_zone_device *tz = data->tz;
 
 	debugfs_remove_recursive(data->debugfsdir);
-	thermal_of_zone_unregister(tz);
 	clk_disable_unprepare(data->clk);
 
 	return 0;

drivers/thermal/mediatek/lvts_thermal.c

@@ -66,7 +66,7 @@
 #define LVTS_MONINT_CONF			0x9FBF7BDE
 
 #define LVTS_INT_SENSOR0			0x0009001F
-#define LVTS_INT_SENSOR1			0X000881F0
+#define LVTS_INT_SENSOR1			0x001203E0
 #define LVTS_INT_SENSOR2			0x00247C00
 #define LVTS_INT_SENSOR3			0x1FC00000
 
@@ -395,8 +395,8 @@ static irqreturn_t lvts_ctrl_irq_handler(struct lvts_ctrl *lvts_ctrl)
 	 *                  => 0x1FC00000
 	 * sensor 2 interrupt: 0000 0000 0010 0100 0111 1100 0000 0000
 	 *                  => 0x00247C00
-	 * sensor 1 interrupt: 0000 0000 0001 0001 0000 0011 1110 0000
-	 *                  => 0X000881F0
+	 * sensor 1 interrupt: 0000 0000 0001 0010 0000 0011 1110 0000
+	 *                  => 0X001203E0
 	 * sensor 0 interrupt: 0000 0000 0000 1001 0000 0000 0001 1111
 	 *                  => 0x0009001F
 	 */
@@ -530,29 +530,33 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
  * The efuse blob values follows the sensor enumeration per thermal
  * controller. The decoding of the stream is as follow:
  *
- *                        <--?-> <----big0 ???---> <-sensor0-> <-0->
- *                        ------------------------------------------
- * index in the stream: : | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 |
- *                        ------------------------------------------
+ * stream index map for MCU Domain :
  *
- *                        <--sensor1--><-0-> <----big1 ???---> <-sen
- *                        ------------------------------------------
- *                        | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD |
- *                        ------------------------------------------
+ * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1----->
+ *  0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09
  *
- *                        sor0-> <-0-> <-sensor1-> <-0-> ..........
- *                        ------------------------------------------
- *                        | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD |
- *                        ------------------------------------------
+ * <-----mcu-tc#1-----> <-----sensor#2-----> <-----sensor#3----->
+ *  0x0A | 0x0B | 0x0C | 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12
  *
- * And so on ...
+ * <-----mcu-tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7----->
+ *  0x13 | 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21
+ *
+ * stream index map for AP Domain :
+ *
+ * <-----ap--tc#0-----> <-----sensor#0-----> <-----sensor#1----->
+ *  0x22 | 0x23 | 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A
+ *
+ * <-----ap--tc#1-----> <-----sensor#2-----> <-----sensor#3----->
+ *  0x2B | 0x2C | 0x2D | 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33
+ *
+ * <-----ap--tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6----->
+ *  0x34 | 0x35 | 0x36 | 0x37 | 0x38 | 0x39 | 0x3A | 0x3B | 0x3C | 0x3D | 0x3E | 0x3F
+ *
+ * <-----ap--tc#3-----> <-----sensor#7-----> <-----sensor#8----->
+ *  0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47 | 0x48
  *
  * The data description gives the offset of the calibration data in
  * this bytes stream for each sensor.
- *
- * Each thermal controller can handle up to 4 sensors max, we don't
- * care if there are less as the array of calibration is sized to 4
- * anyway. The unused sensor slot will be zeroed.
  */
 static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
 					const struct lvts_ctrl_data *lvts_ctrl_data,
@@ -1165,7 +1169,7 @@ static int lvts_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct lvts_ctrl_data mt8195_lvts_data_ctrl[] = {
+static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
 	{
 		.cal_offset = { 0x04, 0x07 },
 		.lvts_sensor = {
@@ -1200,13 +1204,63 @@ static const struct lvts_ctrl_data mt8195_lvts_data_ctrl[] = {
 	}
 };
 
+static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
+		{
+		.cal_offset = { 0x25, 0x28 },
+		.lvts_sensor = {
+			{ .dt_id = MT8195_AP_VPU0 },
+			{ .dt_id = MT8195_AP_VPU1 }
+		},
+		.num_lvts_sensor = 2,
+		.offset = 0x0,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
+	},
+	{
+		.cal_offset = { 0x2e, 0x31 },
+		.lvts_sensor = {
+			{ .dt_id = MT8195_AP_GPU0 },
+			{ .dt_id = MT8195_AP_GPU1 }
+		},
+		.num_lvts_sensor = 2,
+		.offset = 0x100,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
+	},
+	{
+		.cal_offset = { 0x37, 0x3a, 0x3d },
+		.lvts_sensor = {
+			{ .dt_id = MT8195_AP_VDEC },
+			{ .dt_id = MT8195_AP_IMG },
+			{ .dt_id = MT8195_AP_INFRA },
+		},
+		.num_lvts_sensor = 3,
+		.offset = 0x200,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
+	},
+	{
+		.cal_offset = { 0x43, 0x46 },
+		.lvts_sensor = {
+			{ .dt_id = MT8195_AP_CAM0 },
+			{ .dt_id = MT8195_AP_CAM1 }
+		},
+		.num_lvts_sensor = 2,
+		.offset = 0x300,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
+	}
+};
+
 static const struct lvts_data mt8195_lvts_mcu_data = {
-	.lvts_ctrl	= mt8195_lvts_data_ctrl,
-	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_data_ctrl),
+	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
+	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
+};
+
+static const struct lvts_data mt8195_lvts_ap_data = {
+	.lvts_ctrl	= mt8195_lvts_ap_data_ctrl,
+	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_ap_data_ctrl),
 };
 
 static const struct of_device_id lvts_of_match[] = {
 	{ .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
+	{ .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data },
 	{},
 };
 MODULE_DEVICE_TABLE(of, lvts_of_match);

drivers/thermal/rockchip_thermal.c

@@ -39,15 +39,6 @@ enum tshut_polarity {
 	TSHUT_HIGH_ACTIVE,
 };
 
-/*
- * The system has two Temperature Sensors.
- * sensor0 is for CPU, and sensor1 is for GPU.
- */
-enum sensor_id {
-	SENSOR_CPU = 0,
-	SENSOR_GPU,
-};
-
 /*
  * The conversion table has the adc value and temperature.
  * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
@@ -60,12 +51,6 @@ enum adc_sort_mode {
 
 #include "thermal_hwmon.h"
 
-/*
- * The max sensors is two in rockchip SoCs.
- * Two sensors: CPU and GPU sensor.
- */
-#define SOC_MAX_SENSORS	2
-
 /**
  * struct chip_tsadc_table - hold information about chip-specific differences
  * @id: conversion table
@@ -82,7 +67,7 @@ struct chip_tsadc_table {
 
 /**
  * struct rockchip_tsadc_chip - hold the private data of tsadc chip
- * @chn_id: array of sensor ids of chip corresponding to the channel
+ * @chn_offset: the channel offset of the first channel
  * @chn_num: the channel number of tsadc chip
  * @tshut_temp: the hardware-controlled shutdown temperature value
  * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
@@ -98,7 +83,7 @@ struct chip_tsadc_table {
  */
 struct rockchip_tsadc_chip {
 	/* The sensor id of chip correspond to the ADC channel */
-	int chn_id[SOC_MAX_SENSORS];
+	int chn_offset;
 	int chn_num;
 
 	/* The hardware-controlled tshut property */
@@ -156,7 +141,7 @@ struct rockchip_thermal_data {
 	struct platform_device *pdev;
 	struct reset_control *reset;
 
-	struct rockchip_thermal_sensor sensors[SOC_MAX_SENSORS];
+	struct rockchip_thermal_sensor *sensors;
 
 	struct clk *clk;
 	struct clk *pclk;
@@ -180,29 +165,49 @@ struct rockchip_thermal_data {
 #define TSADCV2_AUTO_CON			0x04
 #define TSADCV2_INT_EN				0x08
 #define TSADCV2_INT_PD				0x0c
+#define TSADCV3_AUTO_SRC_CON			0x0c
+#define TSADCV3_HT_INT_EN			0x14
+#define TSADCV3_HSHUT_GPIO_INT_EN		0x18
+#define TSADCV3_HSHUT_CRU_INT_EN		0x1c
+#define TSADCV3_INT_PD				0x24
+#define TSADCV3_HSHUT_PD			0x28
 #define TSADCV2_DATA(chn)			(0x20 + (chn) * 0x04)
 #define TSADCV2_COMP_INT(chn)		        (0x30 + (chn) * 0x04)
 #define TSADCV2_COMP_SHUT(chn)		        (0x40 + (chn) * 0x04)
+#define TSADCV3_DATA(chn)			(0x2c + (chn) * 0x04)
+#define TSADCV3_COMP_INT(chn)		        (0x6c + (chn) * 0x04)
+#define TSADCV3_COMP_SHUT(chn)		        (0x10c + (chn) * 0x04)
 #define TSADCV2_HIGHT_INT_DEBOUNCE		0x60
 #define TSADCV2_HIGHT_TSHUT_DEBOUNCE		0x64
+#define TSADCV3_HIGHT_INT_DEBOUNCE		0x14c
+#define TSADCV3_HIGHT_TSHUT_DEBOUNCE		0x150
 #define TSADCV2_AUTO_PERIOD			0x68
 #define TSADCV2_AUTO_PERIOD_HT			0x6c
+#define TSADCV3_AUTO_PERIOD			0x154
+#define TSADCV3_AUTO_PERIOD_HT			0x158
 
 #define TSADCV2_AUTO_EN				BIT(0)
+#define TSADCV2_AUTO_EN_MASK			BIT(16)
 #define TSADCV2_AUTO_SRC_EN(chn)		BIT(4 + (chn))
+#define TSADCV3_AUTO_SRC_EN(chn)		BIT(chn)
+#define TSADCV3_AUTO_SRC_EN_MASK(chn)		BIT(16 + chn)
 #define TSADCV2_AUTO_TSHUT_POLARITY_HIGH	BIT(8)
+#define TSADCV2_AUTO_TSHUT_POLARITY_MASK	BIT(24)
 
 #define TSADCV3_AUTO_Q_SEL_EN			BIT(1)
 
 #define TSADCV2_INT_SRC_EN(chn)			BIT(chn)
+#define TSADCV2_INT_SRC_EN_MASK(chn)		BIT(16 + (chn))
 #define TSADCV2_SHUT_2GPIO_SRC_EN(chn)		BIT(4 + (chn))
 #define TSADCV2_SHUT_2CRU_SRC_EN(chn)		BIT(8 + (chn))
 
 #define TSADCV2_INT_PD_CLEAR_MASK		~BIT(8)
 #define TSADCV3_INT_PD_CLEAR_MASK		~BIT(16)
+#define TSADCV4_INT_PD_CLEAR_MASK		0xffffffff
 
 #define TSADCV2_DATA_MASK			0xfff
 #define TSADCV3_DATA_MASK			0x3ff
+#define TSADCV4_DATA_MASK			0x1ff
 
 #define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT	4
 #define TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT	4
@@ -213,6 +218,8 @@ struct rockchip_thermal_data {
 
 #define TSADCV5_AUTO_PERIOD_TIME		1622 /* 2.5ms */
 #define TSADCV5_AUTO_PERIOD_HT_TIME		1622 /* 2.5ms */
+#define TSADCV6_AUTO_PERIOD_TIME		5000 /* 2.5ms */
+#define TSADCV6_AUTO_PERIOD_HT_TIME		5000 /* 2.5ms */
 
 #define TSADCV2_USER_INTER_PD_SOC		0x340 /* 13 clocks */
 #define TSADCV5_USER_INTER_PD_SOC		0xfc0 /* 97us, at least 90us */
@@ -229,6 +236,12 @@ struct rockchip_thermal_data {
 #define RK3568_GRF_TSADC_ANA_REG2		(0x10001 << 2)
 #define RK3568_GRF_TSADC_TSEN			(0x10001 << 8)
 
+#define RK3588_GRF0_TSADC_CON			0x0100
+
+#define RK3588_GRF0_TSADC_TRM			(0xff0077 << 0)
+#define RK3588_GRF0_TSADC_SHUT_2CRU		(0x30003 << 10)
+#define RK3588_GRF0_TSADC_SHUT_2GPIO		(0x70007 << 12)
+
 #define GRF_SARADC_TESTBIT_ON			(0x10001 << 2)
 #define GRF_TSADC_TESTBIT_H_ON			(0x10001 << 2)
 #define GRF_TSADC_VCM_EN_L			(0x10001 << 7)
@@ -523,6 +536,15 @@ static const struct tsadc_table rk3568_code_table[] = {
 	{TSADCV2_DATA_MASK, 125000},
 };
 
+static const struct tsadc_table rk3588_code_table[] = {
+	{0, -40000},
+	{215, -40000},
+	{285, 25000},
+	{350, 85000},
+	{395, 125000},
+	{TSADCV4_DATA_MASK, 125000},
+};
+
 static u32 rk_tsadcv2_temp_to_code(const struct chip_tsadc_table *table,
 				   int temp)
 {
@@ -793,6 +815,25 @@ static void rk_tsadcv7_initialize(struct regmap *grf, void __iomem *regs,
 	}
 }
 
+static void rk_tsadcv8_initialize(struct regmap *grf, void __iomem *regs,
+				  enum tshut_polarity tshut_polarity)
+{
+	writel_relaxed(TSADCV6_AUTO_PERIOD_TIME, regs + TSADCV3_AUTO_PERIOD);
+	writel_relaxed(TSADCV6_AUTO_PERIOD_HT_TIME,
+		       regs + TSADCV3_AUTO_PERIOD_HT);
+	writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
+		       regs + TSADCV3_HIGHT_INT_DEBOUNCE);
+	writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
+		       regs + TSADCV3_HIGHT_TSHUT_DEBOUNCE);
+	if (tshut_polarity == TSHUT_HIGH_ACTIVE)
+		writel_relaxed(TSADCV2_AUTO_TSHUT_POLARITY_HIGH |
+			       TSADCV2_AUTO_TSHUT_POLARITY_MASK,
+			       regs + TSADCV2_AUTO_CON);
+	else
+		writel_relaxed(TSADCV2_AUTO_TSHUT_POLARITY_MASK,
+			       regs + TSADCV2_AUTO_CON);
+}
+
 static void rk_tsadcv2_irq_ack(void __iomem *regs)
 {
 	u32 val;
@@ -809,6 +850,17 @@ static void rk_tsadcv3_irq_ack(void __iomem *regs)
 	writel_relaxed(val & TSADCV3_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
 }
 
+static void rk_tsadcv4_irq_ack(void __iomem *regs)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV3_INT_PD);
+	writel_relaxed(val & TSADCV4_INT_PD_CLEAR_MASK, regs + TSADCV3_INT_PD);
+	val = readl_relaxed(regs + TSADCV3_HSHUT_PD);
+	writel_relaxed(val & TSADCV3_INT_PD_CLEAR_MASK,
+		       regs + TSADCV3_HSHUT_PD);
+}
+
 static void rk_tsadcv2_control(void __iomem *regs, bool enable)
 {
 	u32 val;
@@ -844,6 +896,18 @@ static void rk_tsadcv3_control(void __iomem *regs, bool enable)
 	writel_relaxed(val, regs + TSADCV2_AUTO_CON);
 }
 
+static void rk_tsadcv4_control(void __iomem *regs, bool enable)
+{
+	u32 val;
+
+	if (enable)
+		val = TSADCV2_AUTO_EN | TSADCV2_AUTO_EN_MASK;
+	else
+		val = TSADCV2_AUTO_EN_MASK;
+
+	writel_relaxed(val, regs + TSADCV2_AUTO_CON);
+}
+
 static int rk_tsadcv2_get_temp(const struct chip_tsadc_table *table,
 			       int chn, void __iomem *regs, int *temp)
 {
@@ -854,6 +918,16 @@ static int rk_tsadcv2_get_temp(const struct chip_tsadc_table *table,
 	return rk_tsadcv2_code_to_temp(table, val, temp);
 }
 
+static int rk_tsadcv4_get_temp(const struct chip_tsadc_table *table,
+			       int chn, void __iomem *regs, int *temp)
+{
+	u32 val;
+
+	val = readl_relaxed(regs + TSADCV3_DATA(chn));
+
+	return rk_tsadcv2_code_to_temp(table, val, temp);
+}
+
 static int rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table,
 				 int chn, void __iomem *regs, int temp)
 {
@@ -888,6 +962,33 @@ static int rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table,
 	return 0;
 }
 
+static int rk_tsadcv3_alarm_temp(const struct chip_tsadc_table *table,
+				 int chn, void __iomem *regs, int temp)
+{
+	u32 alarm_value;
+
+	/*
+	 * In some cases, some sensors didn't need the trip points, the
+	 * set_trips will pass {-INT_MAX, INT_MAX} to trigger tsadc alarm
+	 * in the end, ignore this case and disable the high temperature
+	 * interrupt.
+	 */
+	if (temp == INT_MAX) {
+		writel_relaxed(TSADCV2_INT_SRC_EN_MASK(chn),
+			       regs + TSADCV3_HT_INT_EN);
+		return 0;
+	}
+	/* Make sure the value is valid */
+	alarm_value = rk_tsadcv2_temp_to_code(table, temp);
+	if (alarm_value == table->data_mask)
+		return -ERANGE;
+	writel_relaxed(alarm_value & table->data_mask,
+		       regs + TSADCV3_COMP_INT(chn));
+	writel_relaxed(TSADCV2_INT_SRC_EN(chn) | TSADCV2_INT_SRC_EN_MASK(chn),
+		       regs + TSADCV3_HT_INT_EN);
+	return 0;
+}
+
 static int rk_tsadcv2_tshut_temp(const struct chip_tsadc_table *table,
 				 int chn, void __iomem *regs, int temp)
 {
@@ -907,6 +1008,25 @@ static int rk_tsadcv2_tshut_temp(const struct chip_tsadc_table *table,
 	return 0;
 }
 
+static int rk_tsadcv3_tshut_temp(const struct chip_tsadc_table *table,
+				 int chn, void __iomem *regs, int temp)
+{
+	u32 tshut_value;
+
+	/* Make sure the value is valid */
+	tshut_value = rk_tsadcv2_temp_to_code(table, temp);
+	if (tshut_value == table->data_mask)
+		return -ERANGE;
+
+	writel_relaxed(tshut_value, regs + TSADCV3_COMP_SHUT(chn));
+
+	/* TSHUT will be valid */
+	writel_relaxed(TSADCV3_AUTO_SRC_EN(chn) | TSADCV3_AUTO_SRC_EN_MASK(chn),
+		       regs + TSADCV3_AUTO_SRC_CON);
+
+	return 0;
+}
+
 static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
 				  enum tshut_mode mode)
 {
@@ -924,9 +1044,25 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
 	writel_relaxed(val, regs + TSADCV2_INT_EN);
 }
 
+static void rk_tsadcv3_tshut_mode(int chn, void __iomem *regs,
+				  enum tshut_mode mode)
+{
+	u32 val_gpio, val_cru;
+
+	if (mode == TSHUT_MODE_GPIO) {
+		val_gpio = TSADCV2_INT_SRC_EN(chn) | TSADCV2_INT_SRC_EN_MASK(chn);
+		val_cru = TSADCV2_INT_SRC_EN_MASK(chn);
+	} else {
+		val_cru = TSADCV2_INT_SRC_EN(chn) | TSADCV2_INT_SRC_EN_MASK(chn);
+		val_gpio = TSADCV2_INT_SRC_EN_MASK(chn);
+	}
+	writel_relaxed(val_gpio, regs + TSADCV3_HSHUT_GPIO_INT_EN);
+	writel_relaxed(val_cru, regs + TSADCV3_HSHUT_CRU_INT_EN);
+}
+
 static const struct rockchip_tsadc_chip px30_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
-	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	/* cpu, gpu */
+	.chn_offset = 0,
 	.chn_num = 2, /* 2 channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
@@ -949,7 +1085,8 @@ static const struct rockchip_tsadc_chip px30_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	/* cpu */
+	.chn_offset = 0,
 	.chn_num = 1, /* one channel for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -973,7 +1110,8 @@ static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	/* cpu */
+	.chn_offset = 0,
 	.chn_num = 1, /* one channel for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -997,8 +1135,8 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
-	.chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
+	/* cpu, gpu */
+	.chn_offset = 1,
 	.chn_num = 2, /* two channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -1022,7 +1160,8 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	/* cpu */
+	.chn_offset = 0,
 	.chn_num = 1, /* one channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
@@ -1045,8 +1184,8 @@ static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
-	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	/* cpu, gpu */
+	.chn_offset = 0,
 	.chn_num = 2, /* two channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -1070,8 +1209,8 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
-	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	/* cpu, gpu */
+	.chn_offset = 0,
 	.chn_num = 2, /* two channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -1095,8 +1234,8 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
-	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	/* cpu, gpu */
+	.chn_offset = 0,
 	.chn_num = 2, /* two channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -1120,8 +1259,8 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
 };
 
 static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
-	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
-	.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+	/* cpu, gpu */
+	.chn_offset = 0,
 	.chn_num = 2, /* two channels for tsadc */
 
 	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
@@ -1144,6 +1283,28 @@ static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
 	},
 };
 
+static const struct rockchip_tsadc_chip rk3588_tsadc_data = {
+	/* top, big_core0, big_core1, little_core, center, gpu, npu */
+	.chn_offset = 0,
+	.chn_num = 7, /* seven channels for tsadc */
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+	.initialize = rk_tsadcv8_initialize,
+	.irq_ack = rk_tsadcv4_irq_ack,
+	.control = rk_tsadcv4_control,
+	.get_temp = rk_tsadcv4_get_temp,
+	.set_alarm_temp = rk_tsadcv3_alarm_temp,
+	.set_tshut_temp = rk_tsadcv3_tshut_temp,
+	.set_tshut_mode = rk_tsadcv3_tshut_mode,
+	.table = {
+		.id = rk3588_code_table,
+		.length = ARRAY_SIZE(rk3588_code_table),
+		.data_mask = TSADCV4_DATA_MASK,
+		.mode = ADC_INCREMENT,
+	},
+};
+
 static const struct of_device_id of_rockchip_thermal_match[] = {
 	{	.compatible = "rockchip,px30-tsadc",
 		.data = (void *)&px30_tsadc_data,
@@ -1180,6 +1341,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = {
 		.compatible = "rockchip,rk3568-tsadc",
 		.data = (void *)&rk3568_tsadc_data,
 	},
+	{
+		.compatible = "rockchip,rk3588-tsadc",
+		.data = (void *)&rk3588_tsadc_data,
+	},
 	{ /* end */ },
 };
 MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
@@ -1350,15 +1515,10 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct rockchip_thermal_data *thermal;
-	const struct of_device_id *match;
 	int irq;
 	int i;
 	int error;
 
-	match = of_match_node(of_rockchip_thermal_match, np);
-	if (!match)
-		return -ENXIO;
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return -EINVAL;
@@ -1370,57 +1530,40 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
 
 	thermal->pdev = pdev;
 
-	thermal->chip = (const struct rockchip_tsadc_chip *)match->data;
+	thermal->chip = device_get_match_data(&pdev->dev);
 	if (!thermal->chip)
 		return -EINVAL;
 
+	thermal->sensors = devm_kcalloc(&pdev->dev, thermal->chip->chn_num,
+					sizeof(*thermal->sensors), GFP_KERNEL);
+	if (!thermal->sensors)
+		return -ENOMEM;
+
 	thermal->regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
 	if (IS_ERR(thermal->regs))
 		return PTR_ERR(thermal->regs);
 
-	thermal->reset = devm_reset_control_array_get(&pdev->dev, false, false);
-	if (IS_ERR(thermal->reset)) {
-		error = PTR_ERR(thermal->reset);
-		dev_err(&pdev->dev, "failed to get tsadc reset: %d\n", error);
-		return error;
-	}
-
-	thermal->clk = devm_clk_get(&pdev->dev, "tsadc");
-	if (IS_ERR(thermal->clk)) {
-		error = PTR_ERR(thermal->clk);
-		dev_err(&pdev->dev, "failed to get tsadc clock: %d\n", error);
-		return error;
-	}
+	thermal->reset = devm_reset_control_array_get_exclusive(&pdev->dev);
+	if (IS_ERR(thermal->reset))
+		return dev_err_probe(&pdev->dev, PTR_ERR(thermal->reset),
+				     "failed to get tsadc reset.\n");
 
-	thermal->pclk = devm_clk_get(&pdev->dev, "apb_pclk");
-	if (IS_ERR(thermal->pclk)) {
-		error = PTR_ERR(thermal->pclk);
-		dev_err(&pdev->dev, "failed to get apb_pclk clock: %d\n",
-			error);
-		return error;
-	}
+	thermal->clk = devm_clk_get_enabled(&pdev->dev, "tsadc");
+	if (IS_ERR(thermal->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(thermal->clk),
+				     "failed to get tsadc clock.\n");
 
-	error = clk_prepare_enable(thermal->clk);
-	if (error) {
-		dev_err(&pdev->dev, "failed to enable converter clock: %d\n",
-			error);
-		return error;
-	}
-
-	error = clk_prepare_enable(thermal->pclk);
-	if (error) {
-		dev_err(&pdev->dev, "failed to enable pclk: %d\n", error);
-		goto err_disable_clk;
-	}
+	thermal->pclk = devm_clk_get_enabled(&pdev->dev, "apb_pclk");
+	if (IS_ERR(thermal->pclk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(thermal->pclk),
+				     "failed to get apb_pclk clock.\n");
 
 	rockchip_thermal_reset_controller(thermal->reset);
 
 	error = rockchip_configure_from_dt(&pdev->dev, np, thermal);
-	if (error) {
-		dev_err(&pdev->dev, "failed to parse device tree data: %d\n",
-			error);
-		goto err_disable_pclk;
-	}
+	if (error)
+		return dev_err_probe(&pdev->dev, error,
+				"failed to parse device tree data\n");
 
 	thermal->chip->initialize(thermal->grf, thermal->regs,
 				  thermal->tshut_polarity);
@@ -1428,24 +1571,19 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
 	for (i = 0; i < thermal->chip->chn_num; i++) {
 		error = rockchip_thermal_register_sensor(pdev, thermal,
 						&thermal->sensors[i],
-						thermal->chip->chn_id[i]);
-		if (error) {
-			dev_err(&pdev->dev,
-				"failed to register sensor[%d] : error = %d\n",
-				i, error);
-			goto err_disable_pclk;
-		}
+						thermal->chip->chn_offset + i);
+		if (error)
+			return dev_err_probe(&pdev->dev, error,
+				"failed to register sensor[%d].\n", i);
 	}
 
 	error = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					  &rockchip_thermal_alarm_irq_thread,
 					  IRQF_ONESHOT,
 					  "rockchip_thermal", thermal);
-	if (error) {
-		dev_err(&pdev->dev,
-			"failed to request tsadc irq: %d\n", error);
-		goto err_disable_pclk;
-	}
+	if (error)
+		return dev_err_probe(&pdev->dev, error,
+				     "failed to request tsadc irq.\n");
 
 	thermal->chip->control(thermal->regs, true);
 
@@ -1461,13 +1599,6 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, thermal);
 
 	return 0;
-
-err_disable_pclk:
-	clk_disable_unprepare(thermal->pclk);
-err_disable_clk:
-	clk_disable_unprepare(thermal->clk);
-
-	return error;
 }
 
 static int rockchip_thermal_remove(struct platform_device *pdev)
@@ -1484,9 +1615,6 @@ static int rockchip_thermal_remove(struct platform_device *pdev)
 
 	thermal->chip->control(thermal->regs, false);
 
-	clk_disable_unprepare(thermal->pclk);
-	clk_disable_unprepare(thermal->clk);
-
 	return 0;
 }
 

drivers/thermal/tegra/tegra-bpmp-thermal.c

@@ -52,6 +52,8 @@ static int __tegra_bpmp_thermal_get_temp(struct tegra_bpmp_thermal_zone *zone,
 	err = tegra_bpmp_transfer(zone->tegra->bpmp, &msg);
 	if (err)
 		return err;
+	if (msg.rx.ret == -BPMP_EFAULT)
+		return -EAGAIN;
 	if (msg.rx.ret)
 		return -EINVAL;
 
@@ -209,7 +211,12 @@ static int tegra_bpmp_thermal_probe(struct platform_device *pdev)
 		zone->tegra = tegra;
 
 		err = __tegra_bpmp_thermal_get_temp(zone, &temp);
-		if (err < 0) {
+
+		/*
+		 * Sensors in powergated domains may temporarily fail to be read
+		 * (-EAGAIN), but will become accessible when the domain is powered on.
+		 */
+		if (err < 0 && err != -EAGAIN) {
 			devm_kfree(&pdev->dev, zone);
 			continue;
 		}

drivers/thermal/thermal_core.c

@@ -794,62 +794,16 @@ void print_bind_err_msg(struct thermal_zone_device *tz,
 		tz->type, cdev->type, ret);
 }
 
-static void __bind(struct thermal_zone_device *tz, int mask,
-		   struct thermal_cooling_device *cdev,
-		   unsigned long *limits,
-		   unsigned int weight)
-{
-	int i, ret;
-
-	for (i = 0; i < tz->num_trips; i++) {
-		if (mask & (1 << i)) {
-			unsigned long upper, lower;
-
-			upper = THERMAL_NO_LIMIT;
-			lower = THERMAL_NO_LIMIT;
-			if (limits) {
-				lower = limits[i * 2];
-				upper = limits[i * 2 + 1];
-			}
-			ret = thermal_zone_bind_cooling_device(tz, i, cdev,
-							       upper, lower,
-							       weight);
-			if (ret)
-				print_bind_err_msg(tz, cdev, ret);
-		}
-	}
-}
-
 static void bind_cdev(struct thermal_cooling_device *cdev)
 {
-	int i, ret;
-	const struct thermal_zone_params *tzp;
+	int ret;
 	struct thermal_zone_device *pos = NULL;
 
 	list_for_each_entry(pos, &thermal_tz_list, node) {
-		if (!pos->tzp && !pos->ops->bind)
-			continue;
-
 		if (pos->ops->bind) {
 			ret = pos->ops->bind(pos, cdev);
 			if (ret)
 				print_bind_err_msg(pos, cdev, ret);
-			continue;
-		}
-
-		tzp = pos->tzp;
-		if (!tzp || !tzp->tbp)
-			continue;
-
-		for (i = 0; i < tzp->num_tbps; i++) {
-			if (tzp->tbp[i].cdev || !tzp->tbp[i].match)
-				continue;
-			if (tzp->tbp[i].match(pos, cdev))
-				continue;
-			tzp->tbp[i].cdev = cdev;
-			__bind(pos, tzp->tbp[i].trip_mask, cdev,
-			       tzp->tbp[i].binding_limits,
-			       tzp->tbp[i].weight);
 		}
 	}
 }
@@ -1134,16 +1088,6 @@ void thermal_cooling_device_update(struct thermal_cooling_device *cdev)
 }
 EXPORT_SYMBOL_GPL(thermal_cooling_device_update);
 
-static void __unbind(struct thermal_zone_device *tz, int mask,
-		     struct thermal_cooling_device *cdev)
-{
-	int i;
-
-	for (i = 0; i < tz->num_trips; i++)
-		if (mask & (1 << i))
-			thermal_zone_unbind_cooling_device(tz, i, cdev);
-}
-
 /**
  * thermal_cooling_device_unregister - removes a thermal cooling device
  * @cdev:	the thermal cooling device to remove.
@@ -1153,8 +1097,6 @@ static void __unbind(struct thermal_zone_device *tz, int mask,
  */
 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
 {
-	int i;
-	const struct thermal_zone_params *tzp;
 	struct thermal_zone_device *tz;
 
 	if (!cdev)
@@ -1171,21 +1113,8 @@ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
 
 	/* Unbind all thermal zones associated with 'this' cdev */
 	list_for_each_entry(tz, &thermal_tz_list, node) {
-		if (tz->ops->unbind) {
+		if (tz->ops->unbind)
 			tz->ops->unbind(tz, cdev);
-			continue;
-		}
-
-		if (!tz->tzp || !tz->tzp->tbp)
-			continue;
-
-		tzp = tz->tzp;
-		for (i = 0; i < tzp->num_tbps; i++) {
-			if (tzp->tbp[i].cdev == cdev) {
-				__unbind(tz, tzp->tbp[i].trip_mask, cdev);
-				tzp->tbp[i].cdev = NULL;
-			}
-		}
 	}
 
 	mutex_unlock(&thermal_list_lock);
@@ -1196,41 +1125,20 @@ EXPORT_SYMBOL_GPL(thermal_cooling_device_unregister);
 
 static void bind_tz(struct thermal_zone_device *tz)
 {
-	int i, ret;
+	int ret;
 	struct thermal_cooling_device *pos = NULL;
-	const struct thermal_zone_params *tzp = tz->tzp;
 
-	if (!tzp && !tz->ops->bind)
+	if (!tz->ops->bind)
 		return;
 
 	mutex_lock(&thermal_list_lock);
 
-	/* If there is ops->bind, try to use ops->bind */
-	if (tz->ops->bind) {
-		list_for_each_entry(pos, &thermal_cdev_list, node) {
-			ret = tz->ops->bind(tz, pos);
-			if (ret)
-				print_bind_err_msg(tz, pos, ret);
-		}
-		goto exit;
-	}
-
-	if (!tzp || !tzp->tbp)
-		goto exit;
-
 	list_for_each_entry(pos, &thermal_cdev_list, node) {
-		for (i = 0; i < tzp->num_tbps; i++) {
-			if (tzp->tbp[i].cdev || !tzp->tbp[i].match)
-				continue;
-			if (tzp->tbp[i].match(tz, pos))
-				continue;
-			tzp->tbp[i].cdev = pos;
-			__bind(tz, tzp->tbp[i].trip_mask, pos,
-			       tzp->tbp[i].binding_limits,
-			       tzp->tbp[i].weight);
-		}
+		ret = tz->ops->bind(tz, pos);
+		if (ret)
+			print_bind_err_msg(tz, pos, ret);
 	}
-exit:
+
 	mutex_unlock(&thermal_list_lock);
 }
 
@@ -1348,13 +1256,21 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
 	if (!tz)
 		return ERR_PTR(-ENOMEM);
 
+	if (tzp) {
+		tz->tzp = kmemdup(tzp, sizeof(*tzp), GFP_KERNEL);
+		if (!tz->tzp) {
+			result = -ENOMEM;
+			goto free_tz;
+		}
+	}
+
 	INIT_LIST_HEAD(&tz->thermal_instances);
 	ida_init(&tz->ida);
 	mutex_init(&tz->lock);
 	id = ida_alloc(&thermal_tz_ida, GFP_KERNEL);
 	if (id < 0) {
 		result = id;
-		goto free_tz;
+		goto free_tzp;
 	}
 
 	tz->id = id;
@@ -1364,7 +1280,6 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
 		ops->critical = thermal_zone_device_critical;
 
 	tz->ops = ops;
-	tz->tzp = tzp;
 	tz->device.class = thermal_class;
 	tz->devdata = devdata;
 	tz->trips = trips;
@@ -1446,6 +1361,8 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
 	tz = NULL;
 remove_id:
 	ida_free(&thermal_tz_ida, id);
+free_tzp:
+	kfree(tz->tzp);
 free_tz:
 	kfree(tz);
 	return ERR_PTR(result);
@@ -1487,15 +1404,13 @@ EXPORT_SYMBOL_GPL(thermal_zone_device_id);
  */
 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 {
-	int i, tz_id;
-	const struct thermal_zone_params *tzp;
+	int tz_id;
 	struct thermal_cooling_device *cdev;
 	struct thermal_zone_device *pos = NULL;
 
 	if (!tz)
 		return;
 
-	tzp = tz->tzp;
 	tz_id = tz->id;
 
 	mutex_lock(&thermal_list_lock);
@@ -1510,22 +1425,9 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 	list_del(&tz->node);
 
 	/* Unbind all cdevs associated with 'this' thermal zone */
-	list_for_each_entry(cdev, &thermal_cdev_list, node) {
-		if (tz->ops->unbind) {
+	list_for_each_entry(cdev, &thermal_cdev_list, node)
+		if (tz->ops->unbind)
 			tz->ops->unbind(tz, cdev);
-			continue;
-		}
-
-		if (!tzp || !tzp->tbp)
-			break;
-
-		for (i = 0; i < tzp->num_tbps; i++) {
-			if (tzp->tbp[i].cdev == cdev) {
-				__unbind(tz, tzp->tbp[i].trip_mask, cdev);
-				tzp->tbp[i].cdev = NULL;
-			}
-		}
-	}
 
 	mutex_unlock(&thermal_list_lock);
 
@@ -1541,6 +1443,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 	device_del(&tz->device);
 	mutex_unlock(&tz->lock);
 
+	kfree(tz->tzp);
+
 	put_device(&tz->device);
 
 	thermal_notify_tz_delete(tz_id);

drivers/thermal/thermal_of.c

@@ -439,7 +439,7 @@ static int thermal_of_unbind(struct thermal_zone_device *tz,
  *
  * @tz: a pointer to the thermal zone structure
  */
-void thermal_of_zone_unregister(struct thermal_zone_device *tz)
+static void thermal_of_zone_unregister(struct thermal_zone_device *tz)
 {
 	struct thermal_trip *trips = tz->trips;
 	struct thermal_zone_params *tzp = tz->tzp;
@@ -451,7 +451,6 @@ void thermal_of_zone_unregister(struct thermal_zone_device *tz)
 	kfree(tzp);
 	kfree(ops);
 }
-EXPORT_SYMBOL_GPL(thermal_of_zone_unregister);
 
 /**
  * thermal_of_zone_register - Register a thermal zone with device node
@@ -473,8 +472,8 @@ EXPORT_SYMBOL_GPL(thermal_of_zone_unregister);
  *	- ENOMEM: if one structure can not be allocated
  *	- Other negative errors are returned by the underlying called functions
  */
-struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor, int id, void *data,
-						     const struct thermal_zone_device_ops *ops)
+static struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor, int id, void *data,
+							    const struct thermal_zone_device_ops *ops)
 {
 	struct thermal_zone_device *tz;
 	struct thermal_trip *trips;
@@ -550,7 +549,6 @@ struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor,
 
 	return ERR_PTR(ret);
 }
-EXPORT_SYMBOL_GPL(thermal_of_zone_register);
 
 static void devm_thermal_of_zone_release(struct device *dev, void *res)
 {

include/dt-bindings/thermal/mediatek,lvts-thermal.h

@@ -16,4 +16,14 @@
 #define MT8195_MCU_LITTLE_CPU2  6
 #define MT8195_MCU_LITTLE_CPU3  7
 
+#define MT8195_AP_VPU0  8
+#define MT8195_AP_VPU1  9
+#define MT8195_AP_GPU0  10
+#define MT8195_AP_GPU1  11
+#define MT8195_AP_VDEC  12
+#define MT8195_AP_IMG   13
+#define MT8195_AP_INFRA 14
+#define MT8195_AP_CAM0  15
+#define MT8195_AP_CAM1  16
+
 #endif /* __MEDIATEK_LVTS_DT_H */

include/linux/thermal.h

@@ -207,41 +207,6 @@ struct thermal_governor {
 	struct list_head	governor_list;
 };
 
-/* Structure that holds binding parameters for a zone */
-struct thermal_bind_params {
-	struct thermal_cooling_device *cdev;
-
-	/*
-	 * This is a measure of 'how effectively these devices can
-	 * cool 'this' thermal zone. It shall be determined by
-	 * platform characterization. This value is relative to the
-	 * rest of the weights so a cooling device whose weight is
-	 * double that of another cooling device is twice as
-	 * effective. See Documentation/driver-api/thermal/sysfs-api.rst for more
-	 * information.
-	 */
-	int weight;
-
-	/*
-	 * This is a bit mask that gives the binding relation between this
-	 * thermal zone and cdev, for a particular trip point.
-	 * See Documentation/driver-api/thermal/sysfs-api.rst for more information.
-	 */
-	int trip_mask;
-
-	/*
-	 * This is an array of cooling state limits. Must have exactly
-	 * 2 * thermal_zone.number_of_trip_points. It is an array consisting
-	 * of tuples <lower-state upper-state> of state limits. Each trip
-	 * will be associated with one state limit tuple when binding.
-	 * A NULL pointer means <THERMAL_NO_LIMITS THERMAL_NO_LIMITS>
-	 * on all trips.
-	 */
-	unsigned long *binding_limits;
-	int (*match) (struct thermal_zone_device *tz,
-			struct thermal_cooling_device *cdev);
-};
-
 /* Structure to define Thermal Zone parameters */
 struct thermal_zone_params {
 	char governor_name[THERMAL_NAME_LENGTH];
@@ -253,9 +218,6 @@ struct thermal_zone_params {
 	 */
 	bool no_hwmon;
 
-	int num_tbps;	/* Number of tbp entries */
-	struct thermal_bind_params *tbp;
-
 	/*
 	 * Sustainable power (heat) that this thermal zone can dissipate in
 	 * mW
@@ -297,25 +259,12 @@ struct thermal_zone_params {
 
 /* Function declarations */
 #ifdef CONFIG_THERMAL_OF
-struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor, int id, void *data,
-						     const struct thermal_zone_device_ops *ops);
-
 struct thermal_zone_device *devm_thermal_of_zone_register(struct device *dev, int id, void *data,
 							  const struct thermal_zone_device_ops *ops);
 
-void thermal_of_zone_unregister(struct thermal_zone_device *tz);
-
 void devm_thermal_of_zone_unregister(struct device *dev, struct thermal_zone_device *tz);
 
-void thermal_of_zone_unregister(struct thermal_zone_device *tz);
-
 #else
-static inline
-struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor, int id, void *data,
-						     const struct thermal_zone_device_ops *ops)
-{
-	return ERR_PTR(-ENOTSUPP);
-}
 
 static inline
 struct thermal_zone_device *devm_thermal_of_zone_register(struct device *dev, int id, void *data,
@@ -324,10 +273,6 @@ struct thermal_zone_device *devm_thermal_of_zone_register(struct device *dev, in
 	return ERR_PTR(-ENOTSUPP);
 }
 
-static inline void thermal_of_zone_unregister(struct thermal_zone_device *tz)
-{
-}
-
 static inline void devm_thermal_of_zone_unregister(struct device *dev,
 						   struct thermal_zone_device *tz)
 {