Commit 51908d2e authored by Pascal PAILLET-LME's avatar Pascal PAILLET-LME Committed by Lee Jones

mfd: stpmic1: Add STPMIC1 driver

STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
Signed-off-by: default avatarPascal Paillet <p.paillet@st.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 3eafbd3a
...@@ -1871,6 +1871,22 @@ config MFD_STM32_TIMERS ...@@ -1871,6 +1871,22 @@ config MFD_STM32_TIMERS
for PWM and IIO Timer. This driver allow to share the for PWM and IIO Timer. This driver allow to share the
registers between the others drivers. registers between the others drivers.
config MFD_STPMIC1
tristate "Support for STPMIC1 PMIC"
depends on (I2C=y && OF)
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
help
Support for ST Microelectronics STPMIC1 PMIC. STPMIC1 has power on
key, watchdog and regulator functionalities which are supported via
the relevant subsystems. This driver provides core support for the
STPMIC1. In order to use the actual functionaltiy of the device other
drivers must be enabled.
To compile this driver as a module, choose M here: the
module will be called stpmic1.
menu "Multimedia Capabilities Port drivers" menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100 depends on ARCH_SA1100
......
...@@ -233,6 +233,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o ...@@ -233,6 +233,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
obj-$(CONFIG_MFD_MT6397) += mt6397-core.o obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o
obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o
obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o
......
// SPDX-License-Identifier: GPL-2.0
// Copyright (C) STMicroelectronics 2018
// Author: Pascal Paillet <p.paillet@st.com>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/mfd/core.h>
#include <linux/mfd/stpmic1.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/pm_wakeirq.h>
#include <linux/regmap.h>
#include <dt-bindings/mfd/st,stpmic1.h>
#define STPMIC1_MAIN_IRQ 0
static const struct regmap_range stpmic1_readable_ranges[] = {
regmap_reg_range(TURN_ON_SR, VERSION_SR),
regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR),
regmap_reg_range(BST_SW_CR, BST_SW_CR),
regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4),
regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4),
regmap_reg_range(INT_MASK_R1, INT_MASK_R4),
regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4),
regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4),
regmap_reg_range(INT_SRC_R1, INT_SRC_R1),
};
static const struct regmap_range stpmic1_writeable_ranges[] = {
regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR),
regmap_reg_range(BST_SW_CR, BST_SW_CR),
regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4),
regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4),
regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4),
};
static const struct regmap_range stpmic1_volatile_ranges[] = {
regmap_reg_range(TURN_ON_SR, VERSION_SR),
regmap_reg_range(WCHDG_CR, WCHDG_CR),
regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4),
regmap_reg_range(INT_SRC_R1, INT_SRC_R4),
};
static const struct regmap_access_table stpmic1_readable_table = {
.yes_ranges = stpmic1_readable_ranges,
.n_yes_ranges = ARRAY_SIZE(stpmic1_readable_ranges),
};
static const struct regmap_access_table stpmic1_writeable_table = {
.yes_ranges = stpmic1_writeable_ranges,
.n_yes_ranges = ARRAY_SIZE(stpmic1_writeable_ranges),
};
static const struct regmap_access_table stpmic1_volatile_table = {
.yes_ranges = stpmic1_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(stpmic1_volatile_ranges),
};
const struct regmap_config stpmic1_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.cache_type = REGCACHE_RBTREE,
.max_register = PMIC_MAX_REGISTER_ADDRESS,
.rd_table = &stpmic1_readable_table,
.wr_table = &stpmic1_writeable_table,
.volatile_table = &stpmic1_volatile_table,
};
static const struct regmap_irq stpmic1_irqs[] = {
REGMAP_IRQ_REG(IT_PONKEY_F, 0, 0x01),
REGMAP_IRQ_REG(IT_PONKEY_R, 0, 0x02),
REGMAP_IRQ_REG(IT_WAKEUP_F, 0, 0x04),
REGMAP_IRQ_REG(IT_WAKEUP_R, 0, 0x08),
REGMAP_IRQ_REG(IT_VBUS_OTG_F, 0, 0x10),
REGMAP_IRQ_REG(IT_VBUS_OTG_R, 0, 0x20),
REGMAP_IRQ_REG(IT_SWOUT_F, 0, 0x40),
REGMAP_IRQ_REG(IT_SWOUT_R, 0, 0x80),
REGMAP_IRQ_REG(IT_CURLIM_BUCK1, 1, 0x01),
REGMAP_IRQ_REG(IT_CURLIM_BUCK2, 1, 0x02),
REGMAP_IRQ_REG(IT_CURLIM_BUCK3, 1, 0x04),
REGMAP_IRQ_REG(IT_CURLIM_BUCK4, 1, 0x08),
REGMAP_IRQ_REG(IT_OCP_OTG, 1, 0x10),
REGMAP_IRQ_REG(IT_OCP_SWOUT, 1, 0x20),
REGMAP_IRQ_REG(IT_OCP_BOOST, 1, 0x40),
REGMAP_IRQ_REG(IT_OVP_BOOST, 1, 0x80),
REGMAP_IRQ_REG(IT_CURLIM_LDO1, 2, 0x01),
REGMAP_IRQ_REG(IT_CURLIM_LDO2, 2, 0x02),
REGMAP_IRQ_REG(IT_CURLIM_LDO3, 2, 0x04),
REGMAP_IRQ_REG(IT_CURLIM_LDO4, 2, 0x08),
REGMAP_IRQ_REG(IT_CURLIM_LDO5, 2, 0x10),
REGMAP_IRQ_REG(IT_CURLIM_LDO6, 2, 0x20),
REGMAP_IRQ_REG(IT_SHORT_SWOTG, 2, 0x40),
REGMAP_IRQ_REG(IT_SHORT_SWOUT, 2, 0x80),
REGMAP_IRQ_REG(IT_TWARN_F, 3, 0x01),
REGMAP_IRQ_REG(IT_TWARN_R, 3, 0x02),
REGMAP_IRQ_REG(IT_VINLOW_F, 3, 0x04),
REGMAP_IRQ_REG(IT_VINLOW_R, 3, 0x08),
REGMAP_IRQ_REG(IT_SWIN_F, 3, 0x40),
REGMAP_IRQ_REG(IT_SWIN_R, 3, 0x80),
};
static const struct regmap_irq_chip stpmic1_regmap_irq_chip = {
.name = "pmic_irq",
.status_base = INT_PENDING_R1,
.mask_base = INT_CLEAR_MASK_R1,
.unmask_base = INT_SET_MASK_R1,
.ack_base = INT_CLEAR_R1,
.num_regs = STPMIC1_PMIC_NUM_IRQ_REGS,
.irqs = stpmic1_irqs,
.num_irqs = ARRAY_SIZE(stpmic1_irqs),
};
static int stpmic1_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct stpmic1 *ddata;
struct device *dev = &i2c->dev;
int ret;
struct device_node *np = dev->of_node;
u32 reg;
ddata = devm_kzalloc(dev, sizeof(struct stpmic1), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
i2c_set_clientdata(i2c, ddata);
ddata->dev = dev;
ddata->regmap = devm_regmap_init_i2c(i2c, &stpmic1_regmap_config);
if (IS_ERR(ddata->regmap))
return PTR_ERR(ddata->regmap);
ddata->irq = of_irq_get(np, STPMIC1_MAIN_IRQ);
if (ddata->irq < 0) {
dev_err(dev, "Failed to get main IRQ: %d\n", ddata->irq);
return ddata->irq;
}
ret = regmap_read(ddata->regmap, VERSION_SR, &reg);
if (ret) {
dev_err(dev, "Unable to read PMIC version\n");
return ret;
}
dev_info(dev, "PMIC Chip Version: 0x%x\n", reg);
/* Initialize PMIC IRQ Chip & associated IRQ domains */
ret = devm_regmap_add_irq_chip(dev, ddata->regmap, ddata->irq,
IRQF_ONESHOT | IRQF_SHARED,
0, &stpmic1_regmap_irq_chip,
&ddata->irq_data);
if (ret) {
dev_err(dev, "IRQ Chip registration failed: %d\n", ret);
return ret;
}
return devm_of_platform_populate(dev);
}
#ifdef CONFIG_PM_SLEEP
static int stpmic1_suspend(struct device *dev)
{
struct i2c_client *i2c = to_i2c_client(dev);
struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c);
disable_irq(pmic_dev->irq);
return 0;
}
static int stpmic1_resume(struct device *dev)
{
struct i2c_client *i2c = to_i2c_client(dev);
struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c);
int ret;
ret = regcache_sync(pmic_dev->regmap);
if (ret)
return ret;
enable_irq(pmic_dev->irq);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(stpmic1_pm, stpmic1_suspend, stpmic1_resume);
static const struct of_device_id stpmic1_of_match[] = {
{ .compatible = "st,stpmic1", },
{},
};
MODULE_DEVICE_TABLE(of, stpmic1_of_match);
static struct i2c_driver stpmic1_driver = {
.driver = {
.name = "stpmic1",
.of_match_table = of_match_ptr(stpmic1_of_match),
.pm = &stpmic1_pm,
},
.probe = stpmic1_probe,
};
module_i2c_driver(stpmic1_driver);
MODULE_DESCRIPTION("STPMIC1 PMIC Driver");
MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>");
MODULE_LICENSE("GPL v2");
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) STMicroelectronics 2018 - All Rights Reserved
* Author: Philippe Peurichard <philippe.peurichard@st.com>,
* Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
*/
#ifndef __LINUX_MFD_STPMIC1_H
#define __LINUX_MFD_STPMIC1_H
#define TURN_ON_SR 0x1
#define TURN_OFF_SR 0x2
#define ICC_LDO_TURN_OFF_SR 0x3
#define ICC_BUCK_TURN_OFF_SR 0x4
#define RREQ_STATE_SR 0x5
#define VERSION_SR 0x6
#define SWOFF_PWRCTRL_CR 0x10
#define PADS_PULL_CR 0x11
#define BUCKS_PD_CR 0x12
#define LDO14_PD_CR 0x13
#define LDO56_VREF_PD_CR 0x14
#define VBUS_DET_VIN_CR 0x15
#define PKEY_TURNOFF_CR 0x16
#define BUCKS_MASK_RANK_CR 0x17
#define BUCKS_MASK_RESET_CR 0x18
#define LDOS_MASK_RANK_CR 0x19
#define LDOS_MASK_RESET_CR 0x1A
#define WCHDG_CR 0x1B
#define WCHDG_TIMER_CR 0x1C
#define BUCKS_ICCTO_CR 0x1D
#define LDOS_ICCTO_CR 0x1E
#define BUCK1_ACTIVE_CR 0x20
#define BUCK2_ACTIVE_CR 0x21
#define BUCK3_ACTIVE_CR 0x22
#define BUCK4_ACTIVE_CR 0x23
#define VREF_DDR_ACTIVE_CR 0x24
#define LDO1_ACTIVE_CR 0x25
#define LDO2_ACTIVE_CR 0x26
#define LDO3_ACTIVE_CR 0x27
#define LDO4_ACTIVE_CR 0x28
#define LDO5_ACTIVE_CR 0x29
#define LDO6_ACTIVE_CR 0x2A
#define BUCK1_STDBY_CR 0x30
#define BUCK2_STDBY_CR 0x31
#define BUCK3_STDBY_CR 0x32
#define BUCK4_STDBY_CR 0x33
#define VREF_DDR_STDBY_CR 0x34
#define LDO1_STDBY_CR 0x35
#define LDO2_STDBY_CR 0x36
#define LDO3_STDBY_CR 0x37
#define LDO4_STDBY_CR 0x38
#define LDO5_STDBY_CR 0x39
#define LDO6_STDBY_CR 0x3A
#define BST_SW_CR 0x40
#define INT_PENDING_R1 0x50
#define INT_PENDING_R2 0x51
#define INT_PENDING_R3 0x52
#define INT_PENDING_R4 0x53
#define INT_DBG_LATCH_R1 0x60
#define INT_DBG_LATCH_R2 0x61
#define INT_DBG_LATCH_R3 0x62
#define INT_DBG_LATCH_R4 0x63
#define INT_CLEAR_R1 0x70
#define INT_CLEAR_R2 0x71
#define INT_CLEAR_R3 0x72
#define INT_CLEAR_R4 0x73
#define INT_MASK_R1 0x80
#define INT_MASK_R2 0x81
#define INT_MASK_R3 0x82
#define INT_MASK_R4 0x83
#define INT_SET_MASK_R1 0x90
#define INT_SET_MASK_R2 0x91
#define INT_SET_MASK_R3 0x92
#define INT_SET_MASK_R4 0x93
#define INT_CLEAR_MASK_R1 0xA0
#define INT_CLEAR_MASK_R2 0xA1
#define INT_CLEAR_MASK_R3 0xA2
#define INT_CLEAR_MASK_R4 0xA3
#define INT_SRC_R1 0xB0
#define INT_SRC_R2 0xB1
#define INT_SRC_R3 0xB2
#define INT_SRC_R4 0xB3
#define PMIC_MAX_REGISTER_ADDRESS INT_SRC_R4
#define STPMIC1_PMIC_NUM_IRQ_REGS 4
#define TURN_OFF_SR_ICC_EVENT 0x08
#define LDO_VOLTAGE_MASK GENMASK(6, 2)
#define BUCK_VOLTAGE_MASK GENMASK(7, 2)
#define LDO_BUCK_VOLTAGE_SHIFT 2
#define LDO_ENABLE_MASK BIT(0)
#define BUCK_ENABLE_MASK BIT(0)
#define BUCK_HPLP_ENABLE_MASK BIT(1)
#define BUCK_HPLP_SHIFT 1
#define STDBY_ENABLE_MASK BIT(0)
#define BUCKS_PD_CR_REG_MASK GENMASK(7, 0)
#define BUCK_MASK_RANK_REGISTER_MASK GENMASK(3, 0)
#define BUCK_MASK_RESET_REGISTER_MASK GENMASK(3, 0)
#define LDO1234_PULL_DOWN_REGISTER_MASK GENMASK(7, 0)
#define LDO56_VREF_PD_CR_REG_MASK GENMASK(5, 0)
#define LDO_MASK_RANK_REGISTER_MASK GENMASK(5, 0)
#define LDO_MASK_RESET_REGISTER_MASK GENMASK(5, 0)
#define BUCK1_PULL_DOWN_REG BUCKS_PD_CR
#define BUCK1_PULL_DOWN_MASK BIT(0)
#define BUCK2_PULL_DOWN_REG BUCKS_PD_CR
#define BUCK2_PULL_DOWN_MASK BIT(2)
#define BUCK3_PULL_DOWN_REG BUCKS_PD_CR
#define BUCK3_PULL_DOWN_MASK BIT(4)
#define BUCK4_PULL_DOWN_REG BUCKS_PD_CR
#define BUCK4_PULL_DOWN_MASK BIT(6)
#define LDO1_PULL_DOWN_REG LDO14_PD_CR
#define LDO1_PULL_DOWN_MASK BIT(0)
#define LDO2_PULL_DOWN_REG LDO14_PD_CR
#define LDO2_PULL_DOWN_MASK BIT(2)
#define LDO3_PULL_DOWN_REG LDO14_PD_CR
#define LDO3_PULL_DOWN_MASK BIT(4)
#define LDO4_PULL_DOWN_REG LDO14_PD_CR
#define LDO4_PULL_DOWN_MASK BIT(6)
#define LDO5_PULL_DOWN_REG LDO56_VREF_PD_CR
#define LDO5_PULL_DOWN_MASK BIT(0)
#define LDO6_PULL_DOWN_REG LDO56_VREF_PD_CR
#define LDO6_PULL_DOWN_MASK BIT(2)
#define VREF_DDR_PULL_DOWN_REG LDO56_VREF_PD_CR
#define VREF_DDR_PULL_DOWN_MASK BIT(4)
#define BUCKS_ICCTO_CR_REG_MASK GENMASK(6, 0)
#define LDOS_ICCTO_CR_REG_MASK GENMASK(5, 0)
#define LDO_BYPASS_MASK BIT(7)
/* Main PMIC Control Register
* SWOFF_PWRCTRL_CR
* Address : 0x10
*/
#define ICC_EVENT_ENABLED BIT(4)
#define PWRCTRL_POLARITY_HIGH BIT(3)
#define PWRCTRL_PIN_VALID BIT(2)
#define RESTART_REQUEST_ENABLED BIT(1)
#define SOFTWARE_SWITCH_OFF_ENABLED BIT(0)
/* Main PMIC PADS Control Register
* PADS_PULL_CR
* Address : 0x11
*/
#define WAKEUP_DETECTOR_DISABLED BIT(4)
#define PWRCTRL_PD_ACTIVE BIT(3)
#define PWRCTRL_PU_ACTIVE BIT(2)
#define WAKEUP_PD_ACTIVE BIT(1)
#define PONKEY_PU_INACTIVE BIT(0)
/* Main PMIC VINLOW Control Register
* VBUS_DET_VIN_CRC DMSC
* Address : 0x15
*/
#define SWIN_DETECTOR_ENABLED BIT(7)
#define SWOUT_DETECTOR_ENABLED BIT(6)
#define VINLOW_ENABLED BIT(0)
#define VINLOW_CTRL_REG_MASK GENMASK(7, 0)
/* USB Control Register
* Address : 0x40
*/
#define BOOST_OVP_DISABLED BIT(7)
#define VBUS_OTG_DETECTION_DISABLED BIT(6)
#define SW_OUT_DISCHARGE BIT(5)
#define VBUS_OTG_DISCHARGE BIT(4)
#define OCP_LIMIT_HIGH BIT(3)
#define SWIN_SWOUT_ENABLED BIT(2)
#define USBSW_OTG_SWITCH_ENABLED BIT(1)
#define BOOST_ENABLED BIT(0)
/* PKEY_TURNOFF_CR
* Address : 0x16
*/
#define PONKEY_PWR_OFF BIT(7)
#define PONKEY_CC_FLAG_CLEAR BIT(6)
#define PONKEY_TURNOFF_TIMER_MASK GENMASK(3, 0)
#define PONKEY_TURNOFF_MASK GENMASK(7, 0)
/*
* struct stpmic1 - stpmic1 master device for sub-drivers
* @dev: master device of the chip (can be used to access platform data)
* @irq: main IRQ number
* @regmap_irq_chip_data: irq chip data
*/
struct stpmic1 {
struct device *dev;
struct regmap *regmap;
int irq;
struct regmap_irq_chip_data *irq_data;
};
#endif /* __LINUX_MFD_STPMIC1_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment