Commit 520a76f8 authored by Fabio Estevam's avatar Fabio Estevam Committed by Mark Brown

ASoC: codec: realtek: Make the node name generic

"The name of a node should be somewhat generic, reflecting the function
of the device and not its precise programming model."

Do as suggested in the bindings examples.
Signed-off-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 34f5897c
...@@ -26,7 +26,7 @@ Pins on the device (for linking into audio routes) for RT274: ...@@ -26,7 +26,7 @@ Pins on the device (for linking into audio routes) for RT274:
Example: Example:
codec: rt274@1c { rt274: codec@1c {
compatible = "realtek,rt274"; compatible = "realtek,rt274";
reg = <0x1c>; reg = <0x1c>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
......
...@@ -32,7 +32,7 @@ Pins on the device (for linking into audio routes) for I2C: ...@@ -32,7 +32,7 @@ Pins on the device (for linking into audio routes) for I2C:
Example: Example:
codec: rt5514@57 { rt5514: codec@57 {
compatible = "realtek,rt5514"; compatible = "realtek,rt5514";
reg = <0x57>; reg = <0x57>;
}; };
...@@ -26,7 +26,7 @@ Pins on the device (for linking into audio routes) for RT5616: ...@@ -26,7 +26,7 @@ Pins on the device (for linking into audio routes) for RT5616:
Example: Example:
codec: rt5616@1b { rt5616: codec@1b {
compatible = "realtek,rt5616"; compatible = "realtek,rt5616";
reg = <0x1b>; reg = <0x1b>;
}; };
...@@ -69,4 +69,4 @@ codec: rt5650@1a { ...@@ -69,4 +69,4 @@ codec: rt5650@1a {
realtek,dmic-en = "true"; realtek,dmic-en = "true";
realtek,en-jd-func = "true"; realtek,en-jd-func = "true";
realtek,jd-mode = <3>; realtek,jd-mode = <3>;
}; };
\ No newline at end of file
...@@ -50,7 +50,7 @@ Pins on the device (for linking into audio routes) for RT5651: ...@@ -50,7 +50,7 @@ Pins on the device (for linking into audio routes) for RT5651:
Example: Example:
codec: rt5651@1a { rt5651: codec@1a {
compatible = "realtek,rt5651"; compatible = "realtek,rt5651";
reg = <0x1a>; reg = <0x1a>;
realtek,dmic-en = "true"; realtek,dmic-en = "true";
......
...@@ -47,7 +47,7 @@ Pins on the device (for linking into audio routes) for RT5663: ...@@ -47,7 +47,7 @@ Pins on the device (for linking into audio routes) for RT5663:
Example: Example:
codec: rt5663@12 { rt5663: codec@12 {
compatible = "realtek,rt5663"; compatible = "realtek,rt5663";
reg = <0x12>; reg = <0x12>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment