Commit 526835d5 authored by Michel Ludwig's avatar Michel Ludwig Committed by Mauro Carvalho Chehab

V4L/DVB (12778): tm6000: Fix SMBus Read Byte command

Signed-off-by: default avatarMichel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 0ec4acc6
......@@ -3,6 +3,9 @@
Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
- Fix SMBus Read Byte command
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation version 2
......@@ -92,6 +95,7 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
{
struct tm6000_core *dev = i2c_adap->algo_data;
int addr, rc, i, byte;
u8 prev_reg = 0;
if (num <= 0)
return 0;
......@@ -100,25 +104,31 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
i2c_dprintk(2,"%s %s addr=0x%x len=%d:",
(msgs[i].flags & I2C_M_RD) ? "read" : "write",
i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
if (!msgs[i].len) {
/* Do I2C scan */
rc=tm6000_i2c_scan(i2c_adap, addr);
} else if (msgs[i].flags & I2C_M_RD) {
char buf[msgs[i].len];
memcpy(buf,msgs[i].buf, msgs[i].len-1);
buf[msgs[i].len-1]=0;
/* Read bytes */
/* I2C is assumed to have always a subaddr at the first byte of the
message bus. Also, the first i2c value of the answer is returned
out of message data.
*/
rc = tm6000_read_write_usb (dev,
USB_DIR_IN | USB_TYPE_VENDOR,
REQ_16_SET_GET_I2CSEQ,
addr|(*msgs[i].buf)<<8, 0,
msgs[i].buf, msgs[i].len);
/* SMBus Read Byte command */
if(msgs[i].len == 1) {
// we use the previously used register to read from
rc = tm6000_read_write_usb (dev,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
REQ_16_SET_GET_I2CSEQ,
addr | prev_reg<<8, 0,
msgs[i].buf, msgs[i].len);
}
else {
rc = tm6000_read_write_usb (dev,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
REQ_16_SET_GET_I2CSEQ,
addr|(*msgs[i].buf)<<8, 0,
msgs[i].buf, msgs[i].len);
}
if (i2c_debug>=2) {
for (byte = 0; byte < msgs[i].len; byte++) {
printk(" %02x", msgs[i].buf[byte]);
......@@ -136,6 +146,13 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
REQ_16_SET_GET_I2CSEQ,
addr|(*msgs[i].buf)<<8, 0,
msgs[i].buf+1, msgs[i].len-1);
if(msgs[i].len >= 1) {
prev_reg = msgs[i].buf[0];
}
else {
prev_reg = 0;
}
}
if (i2c_debug>=2)
printk("\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment