Merge tag 'usb-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 3.18-rc3.

  Mostly usb-serial device ids and gadget fixes for issues that have
  been reported.  Full details are in the shortlog.

  All of these have been in linux-next for a while"

* tag 'usb-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (42 commits)
  usb: chipidea: Fix oops when removing the ci_hdrc module
  usb: gadget: function: Fixed the return value on error path
  usb: dwc2: gadget: disable phy before turning off power regulators
  usb: gadget: function: Remove redundant usb_free_all_descriptors
  usb: dwc3: gadget: Properly initialize LINK TRB
  usb: dwc2: gadget: fix gadget unregistration in udc_stop() function
  usb: dwc2: Bits in bitfield should add up to 32
  usb: dwc2: gadget: sparse warning of context imbalance
  usb: gadget: udc: core: fix kernel oops with soft-connect
  usb: musb: musb_dsps: fix NULL pointer in suspend
  usb: musb: dsps: start OTG timer on resume again
  usb: gadget: loopback: don't queue requests to bogus endpoints
  usb: ffs: fix regression when quirk_ep_out_aligned_size flag is set
  usb: gadget: f_fs: remove redundant ffs_data_get()
  usb: gadget: udc: USB_GADGET_XILINX should depend on HAS_DMA
  Revert "usb: dwc3: dwc3-omap: Disable/Enable only wrapper interrupts in prepare/complete"
  usb: gadget: composite: enable BESL support
  usb: musb: cppi41: restart hrtimer only if not yet done
  usb: dwc3: ep0: fix Data Phase for transfer sizes aligned to wMaxPacketSize
  usb: serial: ftdi_sio: add "bricked" FTDI device PID
  ...

drivers/usb/chipidea/core.c

@@ -742,7 +742,6 @@ static int ci_hdrc_remove(struct platform_device *pdev)
 	ci_role_destroy(ci);
 	ci_hdrc_enter_lpm(ci, true);
 	usb_phy_shutdown(ci->transceiver);
-	kfree(ci->hw_bank.regmap);
 
 	return 0;
 }

drivers/usb/dwc2/core.h

@@ -619,7 +619,7 @@ struct dwc2_hsotg {
 			unsigned port_suspend_change:1;
 			unsigned port_over_current_change:1;
 			unsigned port_l1_change:1;
-			unsigned reserved:26;
+			unsigned reserved:25;
 		} b;
 	} flags;
 

drivers/usb/dwc2/gadget.c

@@ -2561,8 +2561,10 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 			hs_ep->fifo_size = val;
 			break;
 		}
-		if (i == 8)
-			return -ENOMEM;
+		if (i == 8) {
+			ret = -ENOMEM;
+			goto error;
+		}
 	}
 
 	/* for non control endpoints, set PID to D0 */
@@ -2579,6 +2581,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 	/* enable the endpoint interrupt */
 	s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
 
+error:
 	spin_unlock_irqrestore(&hsotg->lock, flags);
 	return ret;
 }
@@ -2934,9 +2937,7 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
 
 	spin_lock_irqsave(&hsotg->lock, flags);
 
-	if (!driver)
-		hsotg->driver = NULL;
-
+	hsotg->driver = NULL;
 	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
 
 	spin_unlock_irqrestore(&hsotg->lock, flags);
@@ -3567,6 +3568,7 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 		s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum);
 
 	/* disable power and clock */
+	s3c_hsotg_phy_disable(hsotg);
 
 	ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
 				    hsotg->supplies);
@@ -3575,8 +3577,6 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 		goto err_ep_mem;
 	}
 
-	s3c_hsotg_phy_disable(hsotg);
-
 	ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget);
 	if (ret)
 		goto err_ep_mem;

drivers/usb/dwc3/dwc3-omap.c

@@ -597,7 +597,7 @@ static int dwc3_omap_prepare(struct device *dev)
 {
 	struct dwc3_omap	*omap = dev_get_drvdata(dev);
 
-	dwc3_omap_write_irqmisc_set(omap, 0x00);
+	dwc3_omap_disable_irqs(omap);
 
 	return 0;
 }
@@ -605,19 +605,8 @@ static int dwc3_omap_prepare(struct device *dev)
 static void dwc3_omap_complete(struct device *dev)
 {
 	struct dwc3_omap	*omap = dev_get_drvdata(dev);
-	u32			reg;
 
-	reg = (USBOTGSS_IRQMISC_OEVT |
-			USBOTGSS_IRQMISC_DRVVBUS_RISE |
-			USBOTGSS_IRQMISC_CHRGVBUS_RISE |
-			USBOTGSS_IRQMISC_DISCHRGVBUS_RISE |
-			USBOTGSS_IRQMISC_IDPULLUP_RISE |
-			USBOTGSS_IRQMISC_DRVVBUS_FALL |
-			USBOTGSS_IRQMISC_CHRGVBUS_FALL |
-			USBOTGSS_IRQMISC_DISCHRGVBUS_FALL |
-			USBOTGSS_IRQMISC_IDPULLUP_FALL);
-
-	dwc3_omap_write_irqmisc_set(omap, reg);
+	dwc3_omap_enable_irqs(omap);
 }
 
 static int dwc3_omap_suspend(struct device *dev)

drivers/usb/dwc3/dwc3-pci.c

@@ -30,6 +30,7 @@
 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3	0xabcd
 #define PCI_DEVICE_ID_INTEL_BYT		0x0f37
 #define PCI_DEVICE_ID_INTEL_MRFLD	0x119e
+#define PCI_DEVICE_ID_INTEL_BSW		0x22B7
 
 struct dwc3_pci {
 	struct device		*dev;
@@ -181,6 +182,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
 				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
 	},
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
 	{  }	/* Terminating Entry */

drivers/usb/dwc3/ep0.c

@@ -256,7 +256,7 @@ static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
 
 	/* stall is always issued on EP0 */
 	dep = dwc->eps[0];
-	__dwc3_gadget_ep_set_halt(dep, 1);
+	__dwc3_gadget_ep_set_halt(dep, 1, false);
 	dep->flags = DWC3_EP_ENABLED;
 	dwc->delayed_status = false;
 
@@ -271,7 +271,7 @@ static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
 	dwc3_ep0_out_start(dwc);
 }
 
-int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
+int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
 {
 	struct dwc3_ep			*dep = to_dwc3_ep(ep);
 	struct dwc3			*dwc = dep->dwc;
@@ -281,6 +281,20 @@ int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
 	return 0;
 }
 
+int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
+{
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+	unsigned long			flags;
+	int				ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = __dwc3_gadget_ep0_set_halt(ep, value);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
 void dwc3_ep0_out_start(struct dwc3 *dwc)
 {
 	int				ret;
@@ -466,7 +480,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 				return -EINVAL;
 			if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
 				break;
-			ret = __dwc3_gadget_ep_set_halt(dep, set);
+			ret = __dwc3_gadget_ep_set_halt(dep, set, true);
 			if (ret)
 				return -EINVAL;
 			break;
@@ -775,9 +789,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 
 	dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
 
-	r = next_request(&ep0->request_list);
-	ur = &r->request;
-
 	trb = dwc->ep0_trb;
 
 	status = DWC3_TRB_SIZE_TRBSTS(trb->size);
@@ -790,6 +801,12 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 		return;
 	}
 
+	r = next_request(&ep0->request_list);
+	if (!r)
+		return;
+
+	ur = &r->request;
+
 	length = trb->size & DWC3_TRB_SIZE_MASK;
 
 	if (dwc->ep0_bounced) {
@@ -811,12 +828,19 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 
 		dwc3_ep0_stall_and_restart(dwc);
 	} else {
-		/*
-		 * handle the case where we have to send a zero packet. This
-		 * seems to be case when req.length > maxpacket. Could it be?
-		 */
-		if (r)
-			dwc3_gadget_giveback(ep0, r, 0);
+		dwc3_gadget_giveback(ep0, r, 0);
+
+		if (IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
+				ur->length && ur->zero) {
+			int ret;
+
+			dwc->ep0_next_event = DWC3_EP0_COMPLETE;
+
+			ret = dwc3_ep0_start_trans(dwc, epnum,
+					dwc->ctrl_req_addr, 0,
+					DWC3_TRBCTL_CONTROL_DATA);
+			WARN_ON(ret < 0);
+		}
 	}
 }
 

drivers/usb/dwc3/gadget.c

@@ -525,12 +525,11 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 		if (!usb_endpoint_xfer_isoc(desc))
 			return 0;
 
-		memset(&trb_link, 0, sizeof(trb_link));
-
 		/* Link TRB for ISOC. The HWO bit is never reset */
 		trb_st_hw = &dep->trb_pool[0];
 
 		trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
+		memset(trb_link, 0, sizeof(*trb_link));
 
 		trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
 		trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
@@ -581,7 +580,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 
 	/* make sure HW endpoint isn't stalled */
 	if (dep->flags & DWC3_EP_STALL)
-		__dwc3_gadget_ep_set_halt(dep, 0);
+		__dwc3_gadget_ep_set_halt(dep, 0, false);
 
 	reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
 	reg &= ~DWC3_DALEPENA_EP(dep->number);
@@ -1202,15 +1201,28 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 	return ret;
 }
 
-int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
 {
 	struct dwc3_gadget_ep_cmd_params	params;
 	struct dwc3				*dwc = dep->dwc;
 	int					ret;
 
+	if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+		dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
+		return -EINVAL;
+	}
+
 	memset(&params, 0x00, sizeof(params));
 
 	if (value) {
+		if (!protocol && ((dep->direction && dep->flags & DWC3_EP_BUSY) ||
+				(!list_empty(&dep->req_queued) ||
+				 !list_empty(&dep->request_list)))) {
+			dev_dbg(dwc->dev, "%s: pending request, cannot halt\n",
+					dep->name);
+			return -EAGAIN;
+		}
+
 		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
 			DWC3_DEPCMD_SETSTALL, &params);
 		if (ret)
@@ -1241,15 +1253,7 @@ static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value)
 	int				ret;
 
 	spin_lock_irqsave(&dwc->lock, flags);
-
-	if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
-		dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
-		ret = -EINVAL;
-		goto out;
-	}
-
-	ret = __dwc3_gadget_ep_set_halt(dep, value);
-out:
+	ret = __dwc3_gadget_ep_set_halt(dep, value, false);
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return ret;
@@ -1260,15 +1264,18 @@ static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
 	struct dwc3_ep			*dep = to_dwc3_ep(ep);
 	struct dwc3			*dwc = dep->dwc;
 	unsigned long			flags;
+	int				ret;
 
 	spin_lock_irqsave(&dwc->lock, flags);
 	dep->flags |= DWC3_EP_WEDGE;
-	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	if (dep->number == 0 || dep->number == 1)
-		return dwc3_gadget_ep0_set_halt(ep, 1);
+		ret = __dwc3_gadget_ep0_set_halt(ep, 1);
 	else
-		return dwc3_gadget_ep_set_halt(ep, 1);
+		ret = __dwc3_gadget_ep_set_halt(dep, 1, false);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
 }
 
 /* -------------------------------------------------------------------------- */

drivers/usb/dwc3/gadget.h

@@ -82,10 +82,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 void dwc3_ep0_interrupt(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event);
 void dwc3_ep0_out_start(struct dwc3 *dwc);
+int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
 int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
 int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 		gfp_t gfp_flags);
-int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value);
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);
 
 /**
  * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW

drivers/usb/dwc3/trace.h

@@ -73,15 +73,23 @@ DECLARE_EVENT_CLASS(dwc3_log_ctrl,
 	TP_PROTO(struct usb_ctrlrequest *ctrl),
 	TP_ARGS(ctrl),
 	TP_STRUCT__entry(
-		__field(struct usb_ctrlrequest *, ctrl)
+		__field(__u8, bRequestType)
+		__field(__u8, bRequest)
+		__field(__le16, wValue)
+		__field(__le16, wIndex)
+		__field(__le16, wLength)
 	),
 	TP_fast_assign(
-		__entry->ctrl = ctrl;
+		__entry->bRequestType = ctrl->bRequestType;
+		__entry->bRequest = ctrl->bRequest;
+		__entry->wValue = ctrl->wValue;
+		__entry->wIndex = ctrl->wIndex;
+		__entry->wLength = ctrl->wLength;
 	),
 	TP_printk("bRequestType %02x bRequest %02x wValue %04x wIndex %04x wLength %d",
-		__entry->ctrl->bRequestType, __entry->ctrl->bRequest,
-		le16_to_cpu(__entry->ctrl->wValue), le16_to_cpu(__entry->ctrl->wIndex),
-		le16_to_cpu(__entry->ctrl->wLength)
+		__entry->bRequestType, __entry->bRequest,
+		le16_to_cpu(__entry->wValue), le16_to_cpu(__entry->wIndex),
+		le16_to_cpu(__entry->wLength)
 	)
 );
 
@@ -94,15 +102,22 @@ DECLARE_EVENT_CLASS(dwc3_log_request,
 	TP_PROTO(struct dwc3_request *req),
 	TP_ARGS(req),
 	TP_STRUCT__entry(
+		__dynamic_array(char, name, DWC3_MSG_MAX)
 		__field(struct dwc3_request *, req)
+		__field(unsigned, actual)
+		__field(unsigned, length)
+		__field(int, status)
 	),
 	TP_fast_assign(
+		snprintf(__get_str(name), DWC3_MSG_MAX, "%s", req->dep->name);
 		__entry->req = req;
+		__entry->actual = req->request.actual;
+		__entry->length = req->request.length;
+		__entry->status = req->request.status;
 	),
 	TP_printk("%s: req %p length %u/%u ==> %d",
-		__entry->req->dep->name, __entry->req,
-		__entry->req->request.actual, __entry->req->request.length,
-		__entry->req->request.status
+		__get_str(name), __entry->req, __entry->actual, __entry->length,
+		__entry->status
 	)
 );
 
@@ -158,17 +173,17 @@ DECLARE_EVENT_CLASS(dwc3_log_gadget_ep_cmd,
 		struct dwc3_gadget_ep_cmd_params *params),
 	TP_ARGS(dep, cmd, params),
 	TP_STRUCT__entry(
-		__field(struct dwc3_ep *, dep)
+		__dynamic_array(char, name, DWC3_MSG_MAX)
 		__field(unsigned int, cmd)
 		__field(struct dwc3_gadget_ep_cmd_params *, params)
 	),
 	TP_fast_assign(
-		__entry->dep = dep;
+		snprintf(__get_str(name), DWC3_MSG_MAX, "%s", dep->name);
 		__entry->cmd = cmd;
 		__entry->params = params;
 	),
 	TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x\n",
-		__entry->dep->name, dwc3_gadget_ep_cmd_string(__entry->cmd),
+		__get_str(name), dwc3_gadget_ep_cmd_string(__entry->cmd),
 		__entry->cmd, __entry->params->param0,
 		__entry->params->param1, __entry->params->param2
 	)
@@ -184,16 +199,24 @@ DECLARE_EVENT_CLASS(dwc3_log_trb,
 	TP_PROTO(struct dwc3_ep *dep, struct dwc3_trb *trb),
 	TP_ARGS(dep, trb),
 	TP_STRUCT__entry(
-		__field(struct dwc3_ep *, dep)
+		__dynamic_array(char, name, DWC3_MSG_MAX)
 		__field(struct dwc3_trb *, trb)
+		__field(u32, bpl)
+		__field(u32, bph)
+		__field(u32, size)
+		__field(u32, ctrl)
 	),
 	TP_fast_assign(
-		__entry->dep = dep;
+		snprintf(__get_str(name), DWC3_MSG_MAX, "%s", dep->name);
 		__entry->trb = trb;
+		__entry->bpl = trb->bpl;
+		__entry->bph = trb->bph;
+		__entry->size = trb->size;
+		__entry->ctrl = trb->ctrl;
 	),
 	TP_printk("%s: trb %p bph %08x bpl %08x size %08x ctrl %08x\n",
-		__entry->dep->name, __entry->trb, __entry->trb->bph,
-		__entry->trb->bpl, __entry->trb->size, __entry->trb->ctrl
+		__get_str(name), __entry->trb, __entry->bph, __entry->bpl,
+		__entry->size, __entry->ctrl
 	)
 );
 

drivers/usb/gadget/composite.c

@@ -560,7 +560,7 @@ static int bos_desc(struct usb_composite_dev *cdev)
 	usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
 	usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
 	usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
-	usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT);
+	usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT | USB_BESL_SUPPORT);
 
 	/*
 	 * The Superspeed USB Capability descriptor shall be implemented by all

drivers/usb/gadget/function/f_acm.c

@@ -433,12 +433,12 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 			dev_vdbg(&cdev->gadget->dev,
 				 "reset acm control interface %d\n", intf);
 			usb_ep_disable(acm->notify);
-		} else {
-			dev_vdbg(&cdev->gadget->dev,
-				 "init acm ctrl interface %d\n", intf);
+		}
+
+		if (!acm->notify->desc)
 			if (config_ep_by_speed(cdev->gadget, f, acm->notify))
 				return -EINVAL;
-		}
+
 		usb_ep_enable(acm->notify);
 		acm->notify->driver_data = acm;
 

drivers/usb/gadget/function/f_eem.c

@@ -325,7 +325,6 @@ static int eem_bind(struct usb_configuration *c, struct usb_function *f)
 	return 0;
 
 fail:
-	usb_free_all_descriptors(f);
 	if (eem->port.out_ep)
 		eem->port.out_ep->driver_data = NULL;
 	if (eem->port.in_ep)

drivers/usb/gadget/function/f_fs.c

@@ -647,15 +647,26 @@ static void ffs_user_copy_worker(struct work_struct *work)
 	if (io_data->read && ret > 0) {
 		int i;
 		size_t pos = 0;
+
+		/*
+		 * Since req->length may be bigger than io_data->len (after
+		 * being rounded up to maxpacketsize), we may end up with more
+		 * data then user space has space for.
+		 */
+		ret = min_t(int, ret, io_data->len);
+
 		use_mm(io_data->mm);
 		for (i = 0; i < io_data->nr_segs; i++) {
+			size_t len = min_t(size_t, ret - pos,
+					io_data->iovec[i].iov_len);
+			if (!len)
+				break;
 			if (unlikely(copy_to_user(io_data->iovec[i].iov_base,
-						 &io_data->buf[pos],
-						 io_data->iovec[i].iov_len))) {
+						 &io_data->buf[pos], len))) {
 				ret = -EFAULT;
 				break;
 			}
-			pos += io_data->iovec[i].iov_len;
+			pos += len;
 		}
 		unuse_mm(io_data->mm);
 	}
@@ -687,7 +698,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 	struct ffs_epfile *epfile = file->private_data;
 	struct ffs_ep *ep;
 	char *data = NULL;
-	ssize_t ret, data_len;
+	ssize_t ret, data_len = -EINVAL;
 	int halt;
 
 	/* Are we still active? */
@@ -787,13 +798,30 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 		/* Fire the request */
 		struct usb_request *req;
 
+		/*
+		 * Sanity Check: even though data_len can't be used
+		 * uninitialized at the time I write this comment, some
+		 * compilers complain about this situation.
+		 * In order to keep the code clean from warnings, data_len is
+		 * being initialized to -EINVAL during its declaration, which
+		 * means we can't rely on compiler anymore to warn no future
+		 * changes won't result in data_len being used uninitialized.
+		 * For such reason, we're adding this redundant sanity check
+		 * here.
+		 */
+		if (unlikely(data_len == -EINVAL)) {
+			WARN(1, "%s: data_len == -EINVAL\n", __func__);
+			ret = -EINVAL;
+			goto error_lock;
+		}
+
 		if (io_data->aio) {
 			req = usb_ep_alloc_request(ep->ep, GFP_KERNEL);
 			if (unlikely(!req))
 				goto error_lock;
 
 			req->buf      = data;
-			req->length   = io_data->len;
+			req->length   = data_len;
 
 			io_data->buf = data;
 			io_data->ep = ep->ep;
@@ -815,7 +843,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 
 			req = ep->req;
 			req->buf      = data;
-			req->length   = io_data->len;
+			req->length   = data_len;
 
 			req->context  = &done;
 			req->complete = ffs_epfile_io_complete;
@@ -2663,8 +2691,6 @@ static inline struct f_fs_opts *ffs_do_functionfs_bind(struct usb_function *f,
 	func->conf = c;
 	func->gadget = c->cdev->gadget;
 
-	ffs_data_get(func->ffs);
-
 	/*
 	 * in drivers/usb/gadget/configfs.c:configfs_composite_bind()
 	 * configurations are bound in sequence with list_for_each_entry,

drivers/usb/gadget/function/f_hid.c

@@ -621,12 +621,14 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
 	dev = MKDEV(major, hidg->minor);
 	status = cdev_add(&hidg->cdev, dev, 1);
 	if (status)
-		goto fail;
+		goto fail_free_descs;
 
 	device_create(hidg_class, NULL, dev, NULL, "%s%d", "hidg", hidg->minor);
 
 	return 0;
 
+fail_free_descs:
+	usb_free_all_descriptors(f);
 fail:
 	ERROR(f->config->cdev, "hidg_bind FAILED\n");
 	if (hidg->req != NULL) {
@@ -635,7 +637,6 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
 			usb_ep_free_request(hidg->in_ep, hidg->req);
 	}
 
-	usb_free_all_descriptors(f);
 	return status;
 }
 

drivers/usb/gadget/function/f_loopback.c

@@ -253,22 +253,13 @@ static void loopback_complete(struct usb_ep *ep, struct usb_request *req)
 
 	case 0:				/* normal completion? */
 		if (ep == loop->out_ep) {
-			/* loop this OUT packet back IN to the host */
 			req->zero = (req->actual < req->length);
 			req->length = req->actual;
-			status = usb_ep_queue(loop->in_ep, req, GFP_ATOMIC);
-			if (status == 0)
-				return;
-
-			/* "should never get here" */
-			ERROR(cdev, "can't loop %s to %s: %d\n",
-				ep->name, loop->in_ep->name,
-				status);
 		}
 
 		/* queue the buffer for some later OUT packet */
 		req->length = buflen;
-		status = usb_ep_queue(loop->out_ep, req, GFP_ATOMIC);
+		status = usb_ep_queue(ep, req, GFP_ATOMIC);
 		if (status == 0)
 			return;
 
@@ -308,60 +299,66 @@ static inline struct usb_request *lb_alloc_ep_req(struct usb_ep *ep, int len)
 	return alloc_ep_req(ep, len, buflen);
 }
 
-static int
-enable_loopback(struct usb_composite_dev *cdev, struct f_loopback *loop)
+static int enable_endpoint(struct usb_composite_dev *cdev, struct f_loopback *loop,
+		struct usb_ep *ep)
 {
-	int					result = 0;
-	struct usb_ep				*ep;
 	struct usb_request			*req;
 	unsigned				i;
+	int					result;
 
-	/* one endpoint writes data back IN to the host */
-	ep = loop->in_ep;
+	/*
+	 * one endpoint writes data back IN to the host while another endpoint
+	 * just reads OUT packets
+	 */
 	result = config_ep_by_speed(cdev->gadget, &(loop->function), ep);
 	if (result)
-		return result;
+		goto fail0;
 	result = usb_ep_enable(ep);
 	if (result < 0)
-		return result;
-	ep->driver_data = loop;
-
-	/* one endpoint just reads OUT packets */
-	ep = loop->out_ep;
-	result = config_ep_by_speed(cdev->gadget, &(loop->function), ep);
-	if (result)
 		goto fail0;
-
-	result = usb_ep_enable(ep);
-	if (result < 0) {
-fail0:
-		ep = loop->in_ep;
-		usb_ep_disable(ep);
-		ep->driver_data = NULL;
-		return result;
-	}
 	ep->driver_data = loop;
 
-	/* allocate a bunch of read buffers and queue them all at once.
+	/*
+	 * allocate a bunch of read buffers and queue them all at once.
 	 * we buffer at most 'qlen' transfers; fewer if any need more
 	 * than 'buflen' bytes each.
 	 */
 	for (i = 0; i < qlen && result == 0; i++) {
 		req = lb_alloc_ep_req(ep, 0);
-		if (req) {
-			req->complete = loopback_complete;
-			result = usb_ep_queue(ep, req, GFP_ATOMIC);
-			if (result)
-				ERROR(cdev, "%s queue req --> %d\n",
-						ep->name, result);
-		} else {
-			usb_ep_disable(ep);
-			ep->driver_data = NULL;
-			result = -ENOMEM;
-			goto fail0;
+		if (!req)
+			goto fail1;
+
+		req->complete = loopback_complete;
+		result = usb_ep_queue(ep, req, GFP_ATOMIC);
+		if (result) {
+			ERROR(cdev, "%s queue req --> %d\n",
+					ep->name, result);
+			goto fail1;
 		}
 	}
 
+	return 0;
+
+fail1:
+	usb_ep_disable(ep);
+
+fail0:
+	return result;
+}
+
+static int
+enable_loopback(struct usb_composite_dev *cdev, struct f_loopback *loop)
+{
+	int					result = 0;
+
+	result = enable_endpoint(cdev, loop, loop->in_ep);
+	if (result)
+		return result;
+
+	result = enable_endpoint(cdev, loop, loop->out_ep);
+	if (result)
+		return result;
+
 	DBG(cdev, "%s enabled\n", loop->function.name);
 	return result;
 }

drivers/usb/gadget/function/f_ncm.c

@@ -1461,7 +1461,6 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
 	return 0;
 
 fail:
-	usb_free_all_descriptors(f);
 	if (ncm->notify_req) {
 		kfree(ncm->notify_req->buf);
 		usb_ep_free_request(ncm->notify, ncm->notify_req);

drivers/usb/gadget/function/f_obex.c

@@ -35,6 +35,7 @@ struct f_obex {
 	struct gserial			port;
 	u8				ctrl_id;
 	u8				data_id;
+	u8				cur_alt;
 	u8				port_num;
 	u8				can_activate;
 };
@@ -235,6 +236,8 @@ static int obex_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 	} else
 		goto fail;
 
+	obex->cur_alt = alt;
+
 	return 0;
 
 fail:
@@ -245,10 +248,7 @@ static int obex_get_alt(struct usb_function *f, unsigned intf)
 {
 	struct f_obex		*obex = func_to_obex(f);
 
-	if (intf == obex->ctrl_id)
-		return 0;
-
-	return obex->port.in->driver_data ? 1 : 0;
+	return obex->cur_alt;
 }
 
 static void obex_disable(struct usb_function *f)
@@ -397,7 +397,6 @@ static int obex_bind(struct usb_configuration *c, struct usb_function *f)
 	return 0;
 
 fail:
-	usb_free_all_descriptors(f);
 	/* we might as well release our claims on endpoints */
 	if (obex->port.out)
 		obex->port.out->driver_data = NULL;

drivers/usb/gadget/function/f_phonet.c

@@ -570,8 +570,8 @@ static int pn_bind(struct usb_configuration *c, struct usb_function *f)
 err_req:
 	for (i = 0; i < phonet_rxq_size && fp->out_reqv[i]; i++)
 		usb_ep_free_request(fp->out_ep, fp->out_reqv[i]);
-err:
 	usb_free_all_descriptors(f);
+err:
 	if (fp->out_ep)
 		fp->out_ep->driver_data = NULL;
 	if (fp->in_ep)

drivers/usb/gadget/function/f_rndis.c

@@ -802,8 +802,10 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
 
 	if (rndis->manufacturer && rndis->vendorID &&
 			rndis_set_param_vendor(rndis->config, rndis->vendorID,
-					       rndis->manufacturer))
-		goto fail;
+					       rndis->manufacturer)) {
+		status = -EINVAL;
+		goto fail_free_descs;
+	}
 
 	/* NOTE:  all that is done without knowing or caring about
 	 * the network link ... which is unavailable to this code
@@ -817,10 +819,11 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
 			rndis->notify->name);
 	return 0;
 
+fail_free_descs:
+	usb_free_all_descriptors(f);
 fail:
 	kfree(f->os_desc_table);
 	f->os_desc_n = 0;
-	usb_free_all_descriptors(f);
 
 	if (rndis->notify_req) {
 		kfree(rndis->notify_req->buf);

drivers/usb/gadget/function/f_subset.c

@@ -380,7 +380,6 @@ geth_bind(struct usb_configuration *c, struct usb_function *f)
 	return 0;
 
 fail:
-	usb_free_all_descriptors(f);
 	/* we might as well release our claims on endpoints */
 	if (geth->port.out_ep)
 		geth->port.out_ep->driver_data = NULL;

drivers/usb/gadget/function/f_uac2.c

@@ -512,6 +512,11 @@ static int snd_uac2_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void snd_uac2_release(struct device *dev)
+{
+	dev_dbg(dev, "releasing '%s'\n", dev_name(dev));
+}
+
 static int alsa_uac2_init(struct audio_dev *agdev)
 {
 	struct snd_uac2_chip *uac2 = &agdev->uac2;
@@ -523,6 +528,7 @@ static int alsa_uac2_init(struct audio_dev *agdev)
 
 	uac2->pdev.id = 0;
 	uac2->pdev.name = uac2_name;
+	uac2->pdev.dev.release = snd_uac2_release;
 
 	/* Register snd_uac2 driver */
 	err = platform_driver_register(&uac2->pdrv);
@@ -772,6 +778,7 @@ struct usb_endpoint_descriptor fs_epout_desc = {
 
 	.bEndpointAddress = USB_DIR_OUT,
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+	.wMaxPacketSize = cpu_to_le16(1023),
 	.bInterval = 1,
 };
 
@@ -780,6 +787,7 @@ struct usb_endpoint_descriptor hs_epout_desc = {
 	.bDescriptorType = USB_DT_ENDPOINT,
 
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+	.wMaxPacketSize = cpu_to_le16(1024),
 	.bInterval = 4,
 };
 
@@ -847,6 +855,7 @@ struct usb_endpoint_descriptor fs_epin_desc = {
 
 	.bEndpointAddress = USB_DIR_IN,
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+	.wMaxPacketSize = cpu_to_le16(1023),
 	.bInterval = 1,
 };
 
@@ -855,6 +864,7 @@ struct usb_endpoint_descriptor hs_epin_desc = {
 	.bDescriptorType = USB_DT_ENDPOINT,
 
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+	.wMaxPacketSize = cpu_to_le16(1024),
 	.bInterval = 4,
 };
 
@@ -947,6 +957,9 @@ free_ep(struct uac2_rtd_params *prm, struct usb_ep *ep)
 	struct snd_uac2_chip *uac2 = prm->uac2;
 	int i;
 
+	if (!prm->ep_enabled)
+		return;
+
 	prm->ep_enabled = false;
 
 	for (i = 0; i < USB_XFERS; i++) {
@@ -1071,7 +1084,7 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
 	prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL);
 	if (!prm->rbuf) {
 		prm->max_psize = 0;
-		goto err;
+		goto err_free_descs;
 	}
 
 	prm = &agdev->uac2.p_prm;
@@ -1079,17 +1092,19 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
 	prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL);
 	if (!prm->rbuf) {
 		prm->max_psize = 0;
-		goto err;
+		goto err_free_descs;
 	}
 
 	ret = alsa_uac2_init(agdev);
 	if (ret)
-		goto err;
+		goto err_free_descs;
 	return 0;
+
+err_free_descs:
+	usb_free_all_descriptors(fn);
 err:
 	kfree(agdev->uac2.p_prm.rbuf);
 	kfree(agdev->uac2.c_prm.rbuf);
-	usb_free_all_descriptors(fn);
 	if (agdev->in_ep)
 		agdev->in_ep->driver_data = NULL;
 	if (agdev->out_ep)

drivers/usb/gadget/function/f_uvc.c

@@ -279,27 +279,41 @@ uvc_function_get_alt(struct usb_function *f, unsigned interface)
 	else if (interface != uvc->streaming_intf)
 		return -EINVAL;
 	else
-		return uvc->state == UVC_STATE_STREAMING ? 1 : 0;
+		return uvc->video.ep->driver_data ? 1 : 0;
 }
 
 static int
 uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
 {
 	struct uvc_device *uvc = to_uvc(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
 	struct v4l2_event v4l2_event;
 	struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
 	int ret;
 
-	INFO(f->config->cdev, "uvc_function_set_alt(%u, %u)\n", interface, alt);
+	INFO(cdev, "uvc_function_set_alt(%u, %u)\n", interface, alt);
 
 	if (interface == uvc->control_intf) {
 		if (alt)
 			return -EINVAL;
 
+		if (uvc->control_ep->driver_data) {
+			INFO(cdev, "reset UVC Control\n");
+			usb_ep_disable(uvc->control_ep);
+			uvc->control_ep->driver_data = NULL;
+		}
+
+		if (!uvc->control_ep->desc)
+			if (config_ep_by_speed(cdev->gadget, f, uvc->control_ep))
+				return -EINVAL;
+
+		usb_ep_enable(uvc->control_ep);
+		uvc->control_ep->driver_data = uvc;
+
 		if (uvc->state == UVC_STATE_DISCONNECTED) {
 			memset(&v4l2_event, 0, sizeof(v4l2_event));
 			v4l2_event.type = UVC_EVENT_CONNECT;
-			uvc_event->speed = f->config->cdev->gadget->speed;
+			uvc_event->speed = cdev->gadget->speed;
 			v4l2_event_queue(uvc->vdev, &v4l2_event);
 
 			uvc->state = UVC_STATE_CONNECTED;
@@ -321,8 +335,10 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
 		if (uvc->state != UVC_STATE_STREAMING)
 			return 0;
 
-		if (uvc->video.ep)
+		if (uvc->video.ep) {
 			usb_ep_disable(uvc->video.ep);
+			uvc->video.ep->driver_data = NULL;
+		}
 
 		memset(&v4l2_event, 0, sizeof(v4l2_event));
 		v4l2_event.type = UVC_EVENT_STREAMOFF;
@@ -335,14 +351,22 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
 		if (uvc->state != UVC_STATE_CONNECTED)
 			return 0;
 
-		if (uvc->video.ep) {
-			ret = config_ep_by_speed(f->config->cdev->gadget,
-					&(uvc->func), uvc->video.ep);
-			if (ret)
-				return ret;
-			usb_ep_enable(uvc->video.ep);
+		if (!uvc->video.ep)
+			return -EINVAL;
+
+		if (uvc->video.ep->driver_data) {
+			INFO(cdev, "reset UVC\n");
+			usb_ep_disable(uvc->video.ep);
+			uvc->video.ep->driver_data = NULL;
 		}
 
+		ret = config_ep_by_speed(f->config->cdev->gadget,
+				&(uvc->func), uvc->video.ep);
+		if (ret)
+			return ret;
+		usb_ep_enable(uvc->video.ep);
+		uvc->video.ep->driver_data = uvc;
+
 		memset(&v4l2_event, 0, sizeof(v4l2_event));
 		v4l2_event.type = UVC_EVENT_STREAMON;
 		v4l2_event_queue(uvc->vdev, &v4l2_event);
@@ -366,6 +390,16 @@ uvc_function_disable(struct usb_function *f)
 	v4l2_event_queue(uvc->vdev, &v4l2_event);
 
 	uvc->state = UVC_STATE_DISCONNECTED;
+
+	if (uvc->video.ep->driver_data) {
+		usb_ep_disable(uvc->video.ep);
+		uvc->video.ep->driver_data = NULL;
+	}
+
+	if (uvc->control_ep->driver_data) {
+		usb_ep_disable(uvc->control_ep);
+		uvc->control_ep->driver_data = NULL;
+	}
 }
 
 /* --------------------------------------------------------------------------

drivers/usb/gadget/function/uvc_video.c

@@ -352,7 +352,8 @@ int uvcg_video_enable(struct uvc_video *video, int enable)
 
 	if (!enable) {
 		for (i = 0; i < UVC_NUM_REQUESTS; ++i)
-			usb_ep_dequeue(video->ep, video->req[i]);
+			if (video->req[i])
+				usb_ep_dequeue(video->ep, video->req[i]);
 
 		uvc_video_free_requests(video);
 		uvcg_queue_enable(&video->queue, 0);

drivers/usb/gadget/udc/Kconfig

@@ -357,6 +357,7 @@ config USB_EG20T
 
 config USB_GADGET_XILINX
 	tristate "Xilinx USB Driver"
+	depends on HAS_DMA
 	depends on OF || COMPILE_TEST
 	help
 	  USB peripheral controller driver for Xilinx USB2 device.

drivers/usb/gadget/udc/udc-core.c

@@ -507,6 +507,11 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
 {
 	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
 
+	if (!udc->driver) {
+		dev_err(dev, "soft-connect without a gadget driver\n");
+		return -EOPNOTSUPP;
+	}
+
 	if (sysfs_streq(buf, "connect")) {
 		usb_gadget_udc_start(udc->gadget, udc->driver);
 		usb_gadget_connect(udc->gadget);

drivers/usb/musb/musb_cppi41.c

@@ -209,7 +209,8 @@ static enum hrtimer_restart cppi41_recheck_tx_req(struct hrtimer *timer)
 		}
 	}
 
-	if (!list_empty(&controller->early_tx_list)) {
+	if (!list_empty(&controller->early_tx_list) &&
+	    !hrtimer_is_queued(&controller->early_tx)) {
 		ret = HRTIMER_RESTART;
 		hrtimer_forward_now(&controller->early_tx,
 				ktime_set(0, 20 * NSEC_PER_USEC));

drivers/usb/musb/musb_dsps.c

@@ -868,9 +868,15 @@ static int dsps_suspend(struct device *dev)
 	struct dsps_glue *glue = dev_get_drvdata(dev);
 	const struct dsps_musb_wrapper *wrp = glue->wrp;
 	struct musb *musb = platform_get_drvdata(glue->musb);
-	void __iomem *mbase = musb->ctrl_base;
+	void __iomem *mbase;
 
 	del_timer_sync(&glue->timer);
+
+	if (!musb)
+		/* This can happen if the musb device is in -EPROBE_DEFER */
+		return 0;
+
+	mbase = musb->ctrl_base;
 	glue->context.control = dsps_readl(mbase, wrp->control);
 	glue->context.epintr = dsps_readl(mbase, wrp->epintr_set);
 	glue->context.coreintr = dsps_readl(mbase, wrp->coreintr_set);
@@ -887,8 +893,12 @@ static int dsps_resume(struct device *dev)
 	struct dsps_glue *glue = dev_get_drvdata(dev);
 	const struct dsps_musb_wrapper *wrp = glue->wrp;
 	struct musb *musb = platform_get_drvdata(glue->musb);
-	void __iomem *mbase = musb->ctrl_base;
+	void __iomem *mbase;
+
+	if (!musb)
+		return 0;
 
+	mbase = musb->ctrl_base;
 	dsps_writel(mbase, wrp->control, glue->context.control);
 	dsps_writel(mbase, wrp->epintr_set, glue->context.epintr);
 	dsps_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
@@ -896,7 +906,9 @@ static int dsps_resume(struct device *dev)
 	dsps_writel(mbase, wrp->mode, glue->context.mode);
 	dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
 	dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
-	setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
+	if (musb->xceiv->state == OTG_STATE_B_IDLE &&
+	    musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
 
 	return 0;
 }

drivers/usb/serial/cp210x.c

@@ -155,6 +155,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+	{ USB_DEVICE(0x1BA4, 0x0002) },	/* Silicon Labs 358x factory default */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
 	{ USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */

drivers/usb/serial/ftdi_sio.c

@@ -140,6 +140,7 @@ static struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
  * /sys/bus/usb-serial/drivers/ftdi_sio/new_id and send a patch or report.
  */
 static const struct usb_device_id id_table_combined[] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_BRICK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
@@ -661,6 +662,8 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },

drivers/usb/serial/ftdi_sio_ids.h

@@ -30,6 +30,12 @@
 
 /*** third-party PIDs (using FTDI_VID) ***/
 
+/*
+ * Certain versions of the official Windows FTDI driver reprogrammed
+ * counterfeit FTDI devices to PID 0. Support these devices anyway.
+ */
+#define FTDI_BRICK_PID		0x0000
+
 #define FTDI_LUMEL_PD12_PID	0x6002
 
 /*
@@ -143,8 +149,12 @@
  * Xsens Technologies BV products (http://www.xsens.com).
  */
 #define XSENS_VID		0x2639
-#define XSENS_CONVERTER_PID	0xD00D	/* Xsens USB-serial converter */
+#define XSENS_AWINDA_STATION_PID 0x0101
+#define XSENS_AWINDA_DONGLE_PID 0x0102
 #define XSENS_MTW_PID		0x0200	/* Xsens MTw */
+#define XSENS_CONVERTER_PID	0xD00D	/* Xsens USB-serial converter */
+
+/* Xsens devices using FTDI VID */
 #define XSENS_CONVERTER_0_PID	0xD388	/* Xsens USB converter */
 #define XSENS_CONVERTER_1_PID	0xD389	/* Xsens Wireless Receiver */
 #define XSENS_CONVERTER_2_PID	0xD38A

drivers/usb/serial/kobil_sct.c

@@ -414,8 +414,6 @@ static int kobil_tiocmset(struct tty_struct *tty,
 	int result;
 	int dtr = 0;
 	int rts = 0;
-	unsigned char *transfer_buffer;
-	int transfer_buffer_length = 8;
 
 	/* FIXME: locking ? */
 	priv = usb_get_serial_port_data(port);
@@ -425,11 +423,6 @@ static int kobil_tiocmset(struct tty_struct *tty,
 		return -EINVAL;
 	}
 
-	/* allocate memory for transfer buffer */
-	transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
-	if (!transfer_buffer)
-		return -ENOMEM;
-
 	if (set & TIOCM_RTS)
 		rts = 1;
 	if (set & TIOCM_DTR)
@@ -469,7 +462,6 @@ static int kobil_tiocmset(struct tty_struct *tty,
 			KOBIL_TIMEOUT);
 	}
 	dev_dbg(dev, "%s - Send set_status_line URB returns: %i\n", __func__, result);
-	kfree(transfer_buffer);
 	return (result < 0) ? result : 0;
 }
 
@@ -530,8 +522,6 @@ static int kobil_ioctl(struct tty_struct *tty,
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct kobil_private *priv = usb_get_serial_port_data(port);
-	unsigned char *transfer_buffer;
-	int transfer_buffer_length = 8;
 	int result;
 
 	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
@@ -541,10 +531,6 @@ static int kobil_ioctl(struct tty_struct *tty,
 
 	switch (cmd) {
 	case TCFLSH:
-		transfer_buffer = kmalloc(transfer_buffer_length, GFP_KERNEL);
-		if (!transfer_buffer)
-			return -ENOBUFS;
-
 		result = usb_control_msg(port->serial->dev,
 			  usb_sndctrlpipe(port->serial->dev, 0),
 			  SUSBCRequest_Misc,
@@ -559,7 +545,6 @@ static int kobil_ioctl(struct tty_struct *tty,
 		dev_dbg(&port->dev,
 			"%s - Send reset_all_queues (FLUSH) URB returns: %i\n",
 			__func__, result);
-		kfree(transfer_buffer);
 		return (result < 0) ? -EIO: 0;
 	default:
 		return -ENOIOCTLCMD;

drivers/usb/serial/option.c

@@ -269,6 +269,7 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_PRODUCT_DE910_DUAL		0x1010
 #define TELIT_PRODUCT_UE910_V2			0x1012
 #define TELIT_PRODUCT_LE920			0x1200
+#define TELIT_PRODUCT_LE910			0x1201
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
@@ -362,6 +363,7 @@ static void option_instat_callback(struct urb *urb);
 
 /* Haier products */
 #define HAIER_VENDOR_ID				0x201e
+#define HAIER_PRODUCT_CE81B			0x10f8
 #define HAIER_PRODUCT_CE100			0x2009
 
 /* Cinterion (formerly Siemens) products */
@@ -589,6 +591,11 @@ static const struct option_blacklist_info zte_1255_blacklist = {
 	.reserved = BIT(3) | BIT(4),
 };
 
+static const struct option_blacklist_info telit_le910_blacklist = {
+	.sendsetup = BIT(0),
+	.reserved = BIT(1) | BIT(2),
+};
+
 static const struct option_blacklist_info telit_le920_blacklist = {
 	.sendsetup = BIT(0),
 	.reserved = BIT(1) | BIT(5),
@@ -1138,6 +1145,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
+		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
 		.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
@@ -1621,6 +1630,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
 	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HAIER_VENDOR_ID, HAIER_PRODUCT_CE81B, 0xff, 0xff, 0xff) },
 	/* Pirelli  */
 	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2, 0xff) },