Commit 52abad47 authored by Lendacky, Thomas's avatar Lendacky, Thomas Committed by Greg Kroah-Hartman

x86/perf/amd: Remove need to check "running" bit in NMI handler

commit 3966c3fe upstream.

Spurious interrupt support was added to perf in the following commit, almost
a decade ago:

  63e6be6d ("perf, x86: Catch spurious interrupts after disabling counters")

The two previous patches (resolving the race condition when disabling a
PMC and NMI latency mitigation) allow for the removal of this older
spurious interrupt support.

Currently in x86_pmu_stop(), the bit for the PMC in the active_mask bitmap
is cleared before disabling the PMC, which sets up a race condition. This
race condition was mitigated by introducing the running bitmap. That race
condition can be eliminated by first disabling the PMC, waiting for PMC
reset on overflow and then clearing the bit for the PMC in the active_mask
bitmap. The NMI handler will not re-enable a disabled counter.

If x86_pmu_stop() is called from the perf NMI handler, the NMI latency
mitigation support will guard against any unhandled NMI messages.
Signed-off-by: default avatarTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org> # 4.14.x-
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/Message-ID:
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b09d7548
...@@ -4,8 +4,8 @@ ...@@ -4,8 +4,8 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/nmi.h>
#include <asm/apicdef.h> #include <asm/apicdef.h>
#include <asm/nmi.h>
#include "../perf_event.h" #include "../perf_event.h"
...@@ -491,6 +491,23 @@ static void amd_pmu_disable_all(void) ...@@ -491,6 +491,23 @@ static void amd_pmu_disable_all(void)
} }
} }
static void amd_pmu_disable_event(struct perf_event *event)
{
x86_pmu_disable_event(event);
/*
* This can be called from NMI context (via x86_pmu_stop). The counter
* may have overflowed, but either way, we'll never see it get reset
* by the NMI if we're already in the NMI. And the NMI latency support
* below will take care of any pending NMI that might have been
* generated by the overflow.
*/
if (in_nmi())
return;
amd_pmu_wait_on_overflow(event->hw.idx);
}
/* /*
* Because of NMI latency, if multiple PMC counters are active or other sources * Because of NMI latency, if multiple PMC counters are active or other sources
* of NMIs are received, the perf NMI handler can handle one or more overflowed * of NMIs are received, the perf NMI handler can handle one or more overflowed
...@@ -738,7 +755,7 @@ static __initconst const struct x86_pmu amd_pmu = { ...@@ -738,7 +755,7 @@ static __initconst const struct x86_pmu amd_pmu = {
.disable_all = amd_pmu_disable_all, .disable_all = amd_pmu_disable_all,
.enable_all = x86_pmu_enable_all, .enable_all = x86_pmu_enable_all,
.enable = x86_pmu_enable_event, .enable = x86_pmu_enable_event,
.disable = x86_pmu_disable_event, .disable = amd_pmu_disable_event,
.hw_config = amd_pmu_hw_config, .hw_config = amd_pmu_hw_config,
.schedule_events = x86_schedule_events, .schedule_events = x86_schedule_events,
.eventsel = MSR_K7_EVNTSEL0, .eventsel = MSR_K7_EVNTSEL0,
......
...@@ -1328,8 +1328,9 @@ void x86_pmu_stop(struct perf_event *event, int flags) ...@@ -1328,8 +1328,9 @@ void x86_pmu_stop(struct perf_event *event, int flags)
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw; struct hw_perf_event *hwc = &event->hw;
if (__test_and_clear_bit(hwc->idx, cpuc->active_mask)) { if (test_bit(hwc->idx, cpuc->active_mask)) {
x86_pmu.disable(event); x86_pmu.disable(event);
__clear_bit(hwc->idx, cpuc->active_mask);
cpuc->events[hwc->idx] = NULL; cpuc->events[hwc->idx] = NULL;
WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED); WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
hwc->state |= PERF_HES_STOPPED; hwc->state |= PERF_HES_STOPPED;
...@@ -1426,16 +1427,8 @@ int x86_pmu_handle_irq(struct pt_regs *regs) ...@@ -1426,16 +1427,8 @@ int x86_pmu_handle_irq(struct pt_regs *regs)
apic_write(APIC_LVTPC, APIC_DM_NMI); apic_write(APIC_LVTPC, APIC_DM_NMI);
for (idx = 0; idx < x86_pmu.num_counters; idx++) { for (idx = 0; idx < x86_pmu.num_counters; idx++) {
if (!test_bit(idx, cpuc->active_mask)) { if (!test_bit(idx, cpuc->active_mask))
/*
* Though we deactivated the counter some cpus
* might still deliver spurious interrupts still
* in flight. Catch them:
*/
if (__test_and_clear_bit(idx, cpuc->running))
handled++;
continue; continue;
}
event = cpuc->events[idx]; event = cpuc->events[idx];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment